Owner's Manual

32
Load a fully charged Battery Pack LP-E17 into the camera. The
camera’s viewfinder becomes bright when a battery is installed,
and darkens when the battery is removed. If the battery is not
installed, the image in the viewfinder becomes blurred and you
cannot perform focusing.
1
Open the cover.
 Slide the lever as shown by the
arrows and open the cover.
2
Insert the battery.
 Insert the end with the electrical
contacts.
 Insert the battery until it locks in
place.
3
Close the cover.
 Press the cover until it snaps shut.
Open the cover and remove the
battery.
 Press the battery lock lever as shown
by the arrow and remove the battery.
 To prevent short circuiting, be sure to
attach the provided protective cover
(p.30) to the battery.
Installing and Removing the Battery
Installing the Battery
Removing the Battery