Owner's Manual

119
Connecting to a Detected Network Manually via Wi-Fi
4
Select [Switch network].
 Displayed when [q], [D], or [l] is
selected in step 2.
5
Select an access point.
 Press the <W> <X> keys to select
the access point to connect to via
Wi-Fi from the list of access points.
(1) SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used
[Refresh] and [Manual settings]
 Scroll down the screen in step 5 to display [Refresh] and [Manual
settings].
 To search for access points again, select [Refresh].
 To specify the settings for the access point manually, select [Manual
settings]. Enter the SSID using the virtual keyboard and then
specify the settings following the instructions displayed.
(1) (2) (3)
For [Camera access point mode] displayed in step 5, see page 123.