Owner's Manual

Connecting to a Detected Network Manually via Wi-Fi
120
 Enter the password specified for the access point. For details on the
specified password, refer to the access point’s instruction manual.
 The screens displayed in steps 6 to 7 below vary depending on the
authentication and encryption specified for the access point.
 Go to step 8 when the [IP address set.] screen is displayed instead
of the screens for steps 6 to 7.
6
Select a key index.
 The [Key index] screen is displayed
only if WEP encryption is used by the
access point.
 Select the key index number
specified for the access point, then
press <0>.
 Select [OK] and press <0> to go to
the next screen.
7
Enter the password.
 Enter the password using the virtual
keyboard (p.160), then press the
<M> button.
 The [IP address set.] screen (p.121)
will be displayed.
Entering the Access Point Password