Owner's Manual

123
Connecting to a Detected Network Manually via Wi-Fi
A screen to select a destination may be displayed depending on the
Web service you select in [Wi-Fi function].
To register destinations or to specify the settings, you must use a
computer. For more information, refer to the EOS Utility Instruction
Manual.
 When [m] (Email) or other service is
selected on the [Upload to Web
service] screen, the [Send to] screen
may be displayed.
 Select the destination from the list of
registered destinations and press
<0>.
 The procedures for setting up a
connection and sending images are
the same as those for other Web
services.
Camera access point mode is a
connection mode for connecting the
camera directly to each device via Wi-Fi.
Displayed when [q], [D], or [l] is
selected in [Wi-Fi function].
Send To Screen
Camera Access Point Mode