Owner's Manual

138
When an error occurs, display the details of the error by following one of
the procedures below. Then, eliminate the cause of the error by referring
to the examples shown in this chapter.
 On the [View info] screen, press <0> (p.135).
 Select [Error details] on the [Wi-Fi on] screen, then press <0>.
Click the error code number’s page in the following chart to jump to the
corresponding page.
Responding to Error Messages
11 (p.139) 12 (p.139)
21 (p.140) 22 (p.141) 23 (p.142)
61 (p.143) 63 (p.144) 64 (p.144) 65 (p.145) 66 (p.145)
67 (p.145) 68 (p.146) 69 (p.146)
91 (p.146)
101 (p.146) 102 (p.147) 103 (p.147) 104 (p.147) 105 (p.148)
106 (p.148) 107 (p.148) 108 (p.148) 109 (p.148)
121 (p.148) 122 (p.149) 123 (p.149) 124 (p.149) 125 (p.149)
126 (p.149) 127 (p.150)
141 (p.150) 142 (p.150)
When an error occurs, [Err**] is displayed on the upper right of the [Wi-Fi
function] screen. It disappears when the camera’s power is set to <2>.