Owner's Manual

Responding to Error Messages
148
 Is the card in the camera to receive data locked?
 Check the card in the camera to receive data. Release the lock,
then try sending the data again.
 Check if the folder number of the camera to receive data is
999 and the file number 9999.
 Folder or file names cannot be created automatically. Replace the
card in the camera to receive data, then try sending the data again.
 Is the card working properly?
 Replace the card in the camera to receive data, then try sending
the data again.
 Has the target camera terminated the connection?
 Check the communication status and re-establish the Wi-Fi
connection between the cameras.
 A problem other than error code number 101 to 108 occurred
while the cameras are connected to each other.
 Re-establish the Wi-Fi connection between the cameras.
 The target Web server does not have enough free space.
 Delete unnecessary images on the Web server, check the free
space on the Web server, then try sending the data again.
105: Could not receive files. Card’s write protect switch is
set to lock
106: Could not receive files. Folder and file number have
reached maximum value
107: Could not receive files. Card cannot be accessed
108: Disconnected
109: An error has occurred
121: Not enough free space on server