Instruction manuals (PDF files) and software can be downloaded from the Canon Web site (p.4, 596). www.canon.
Introduction The EOS 6D Mark II is a digital single-lens reflex camera featuring a full-frame (approx. 35.9 x 24.0 mm) CMOS sensor with approx. 26.2 effective megapixels, DIGIC 7, normal ISO speed range of ISO 100 ISO 40000 (for still photos), high-precision and high-speed 45-point AF (up to 45 cross-type points), maximum continuous shooting speed of approx. 6.5 shots/sec.
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Camera Strap (with eyecup and body cap) Battery Pack LP-E6N (with protective cover) Battery Charger LC-E6/LC-E6E* * Battery Charger LC-E6 or LC-E6E is provided. (The LC-E6E comes with a power cord.) The camera does not come with an interface cable or HDMI cable. The camera does not come with the Software CD-ROM.
Instruction Manuals Camera Basic Instruction Manual and Wi-Fi (Wireless Communication) Function Basic Instruction Manual The booklet is the Basic Instruction Manual that contains the Camera Basic Instruction Manual and the Wi-Fi Function Basic Instruction Manual. More detailed Instruction Manuals (PDF files) can be downloaded from the Canon Web site to your computer or the like.
Compatible Cards Downloading Instruction Manuals Using QR Code The Instruction Manuals (PDF files) can be downloaded to your smartphone or tablet using the QR code. X www.canon.com/icpd A software application is required to read out the QR code. Select your country or region of residence, then download the Instruction Manuals. Select [Manual/software URL] under the [55] tab to display the QR code on the camera’s LCD monitor.
Quick Start Guide Insert the battery (p.42). 1 Upon purchase, charge the battery to start using (p.40). Insert the card (p.43). 2 With the card’s label facing toward the back of the camera, insert it into the card slot. 3 Attach the lens (p.53). 4 Set the lens’s focus mode switch to (p.53). Align the red mount index on the lens with the red mount index on the camera to attach the lens. 22 22 m 5 Set the power switch to <1>, then set the shooting mode to (p.47).
Quick Start Guide 6 Flip out the LCD monitor (p.46). 7 Focus on the subject (p.56). 8 Take the picture (p.56). 9 Review the picture. When the LCD monitor displays the date/time/zone setting screen, see page 49. Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus on the subject. Press the shutter button completely to take the picture. The image just captured will be displayed for approx. 2 sec. on the LCD monitor.
Conventions Used in this Manual Icons in this Manual <6> <5> <9> <0> 0/9/4/ 7/8 : : : : Indicates the Main Dial. Indicates the Quick Control Dial. Indicates the Multi-controller. Indicates the direction of the shift or move when the key on the Multi-controller is pressed. : Indicates the Setting button. : After you press an operation button, this indicates how long (in seconds) the respective setting will remain in effect after you let go of the button. The respective time will be 4 sec.
Chapters Introduction 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2 Getting Started and Basic Camera Operations 39 Basic Shooting 93 Setting the AF and Drive Modes 129 Image Settings 161 GPS Settings 217 Advanced Operations for Photographic Effects 233 Flash Photography 277 Shooting with the LCD Monitor (Live View Shooting) 289 Shooting Movies 325 Image Playback 387 Post-Processing Images 437 Sensor cleaning 449 Print Order and Photobook Set-up 457 Customizing the Camera 467 Refere
Contents Introduction 2 Item Check List................................................................................. 3 Instruction Manuals .......................................................................... 4 Compatible Cards............................................................................. 5 Quick Start Guide ............................................................................. 6 Conventions Used in this Manual..................................................... 8 Chapters.
Contents Formatting the Card ........................................................................70 Before You Start ..............................................................................73 Disabling the Beeper ....................................................................73 Setting the Power-off Time/Auto Power Off.................................. 73 Setting the Image Review Time ...................................................74 Turning the LCD Monitor Off/On .......................
Contents 8: r Panning.........................................................................114 8: 4 Shooting Close-ups ........................................................116 8: P Shooting Food.................................................................117 8: y Shooting Candlelight Portraits ........................................118 8: 6 Shooting Night Portraits (With a Tripod) .........................119 8: F Shooting Night Scenes (Handheld) ...............................
Contents Customizing a Picture Style .......................................................... 180 Registering a Picture Style............................................................ 183 B: Setting the White Balance....................................................185 u White Balance Correction ....................................................... 191 Auto Correction of Brightness and Contrast ................................. 194 Setting Noise Reduction ...........................................
Contents a: Manual Exposure ................................................................... 241 q Selecting the Metering Mode.................................................. 243 O Setting the Desired Exposure Compensation ......................... 245 h Auto Exposure Bracketing (AEB)........................................... 247 A Locking the Exposure for Shooting (AE Lock) ........................ 249 F: Long (Bulb) Exposures ...........................................................
Contents 9 Shooting Movies 325 k Shooting Movies .....................................................................326 Shooting Function Settings ...........................................................339 Setting the Movie Recording Quality.............................................341 Setting the Sound Recording ........................................................346 Shooting HDR Movies................................................................... 348 a Shooting Time-lapse Movies.....
Contents Slide Show (Auto Playback) ......................................................... 424 Viewing Images on a TV Set ........................................................ 427 L Erasing Images........................................................................ 430 Adjusting the LCD Monitor Brightness ......................................... 434 Setting the Auto Rotation of Vertical Images ................................
Contents Registering My Menu ................................................................... 505 w: Registering Custom Shooting Modes.................................... 510 15 Reference 513 System Map .................................................................................. 514 Checking the Battery Information.................................................. 516 Using a Household Power Outlet.................................................. 520 H Using Eye-Fi Cards .....................
Index to Features Power LCD monitor Charging the battery Î p.40 Vari-angle Î p.46 Battery level Î p.48 Touch control Î p.67 Brightness Î p.434 Half-press Off/On Î p.74 Household power outlet Î p.520 Electronic level Î p.80 Auto power off Shooting mode guide Î p.89 Feature guide Î p.90 Help Î p.91 Checking battery information Î p.516 Î p.73 Cards Formatting Î p.70 Releasing shutter without card Î p.44 Cards compatible with movie recording AF Î p.343 Lens Attaching Î p.
Index to Features Image Recording Settings Creating/Selecting a folder Î p.209 File numbering Î p.211 Image Quality Shooting Shooting mode • Basic Zone modes • SCN mode • Creative Zone modes Î p.35 Î p.35 Î p.108 Î p.36 Aspect ratio Î p.168 Image-recording quality Î p.162 HDR mode Î p.253 ISO speed (still photos) Î p.170 Multiple exposures Î p.258 Picture Style Î p.176 Mirror lockup Î p.265 White balance Î p.185 Bulb timer Î p.251 Auto Lighting Optimizer Î p.194 Interval timer Î p.
Index to Features Flash Movie Shooting External flash Î p.278 Autoexposure shooting Î p.326 Flash exposure compensation Î p.278 Manual exposure shooting Î p.330 FE lock Î p.278 ISO speed (movie) Î p.372 Flash function settings Î p.281 AF method Î p.308 Movie Servo AF Î p.373 Flash Custom Function settings Î p.286 Live View Shooting Movie Servo AF tracking sensitivity Î p.375 Movie Servo AF speed Î p.376 Live View shooting Î p.289 Movie recording quality Î p.341 AF operation Î p.
Index to Features Playback Customization Image review time Î p.74 Custom Functions (C.Fn) Î p.469 Single-image display Î p.388 Custom Controls Î p.497 My Menu Î p.505 Shooting information display Î p.391 Index display Î p.399 Image browsing (Jump display) Î p.400 Setting image search conditions Î p.402 Append Dust Delete Data Î p.452 Magnified view Î p.404 Manual sensor cleaning Î p.455 Image rotation Î p.408 Protect Î p.409 Rating Î p.412 Software Start Guide Î p.
Safety Precautions The following precautions are provided to prevent harm or injury to yourself and others. Make sure to thoroughly understand and follow these precautions before using the product. If you experience any malfunctions, problems, or damage to the product, contact the nearest Canon Service Center or the dealer from whom you purchased the product. Warnings: Follow the warnings below. Otherwise, death or serious injuries may result.
Safety Precautions Do not use the equipment where there is flammable gas. This is to prevent an explosion or a fire. If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the exposed internal parts. There is a possibility of an electrical shock. Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision.
Safety Precautions Cautions: Follow the cautions below. Otherwise, physical injury or property damage may result. Do not use or store the product in a high-temperature location such as inside a car under the hot sun. The product may become hot and cause burns. Doing so may also cause battery leakage or explosion, which will degrade the performance or shorten the life of the product. Do not carry the camera around when it is attached to a tripod. Doing so may cause an injury or an accident.
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. To maximize the camera’s dust- and drip- resistance, keep the terminal cover, battery compartment cover, card slot cover, and all other covers firmly closed.
Handling Precautions Do not block the mirror operation with your finger, etc. Doing so may cause a malfunction. Use only a commercially-available blower to blow away dust when it adheres to the lens, viewfinder, reflex mirror, focusing screen, etc. Do not use cleaners that contain organic solvents to clean the camera body or lens. For stubborn dirt, take the camera to the nearest Canon Service Center. Do not touch the camera’s electrical contacts with your fingers.
Handling Precautions LCD Panel and LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, 0.01% or fewer of the pixels may be dead, and there may also be spots of black, red, or other colors. This is not a malfunction. They do not affect the images recorded. If the LCD monitor is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Nomenclature Drive mode selection button (p.156, 159) ISO speed setting button (p.170) Metering mode selection button (p.243) LCD panel illumination button (p.60) AF operation/AF method selection button (p.130, 305/308) AF area selection button (p.136, 482) GPS antenna Lens mount index (p.53) Flash sync contacts Hot shoe (p.278) Mode Dial lock-release button (p.57) <6> Main Dial (p.57) Mode Dial (p.35, 57) Shutter button (p.56) Strap mount (p.
Nomenclature LCD panel (p.33, 34) Eyecup (p.270) Viewfinder eyepiece
AF start button (p.56, 130, 292, 337) AE lock/ FE lock button (p.249, 278) AF point selection button (p.136, 137) Info button (p.60, 80, 84, 91, 293, 298, 334, 388) Power switch (p.47) Speaker Quick Control button (p.61) Terminal cover P (N-Mark)* Menu button (p.64) Erase button (p.430) <0> Setting button (p.64) External microphone IN terminal (p.347) Digital terminal (p.
Nomenclature Dioptric adjustment knob (p.55) Live View shooting/ Movie shooting switch (p.289/325) <0> Start/Stop button (p.290, 326) Focal plane mark Access lamp (p.44) Strap mount (p.38) Index/ Magnify/ Reduce button (p.399/317, 321, 404) Card slot cover (p.43) Battery compartment cover release lever (p.42) Accessory positioning hole LCD monitor (p.46, 64, 290, 326, 404) Battery compartment cover (p.42) Serial number Multi function lock switch (p.
Nomenclature Viewfinder Information Display Electronic level (p.81) Spot metering circle (p.244) Large Zone AF frame (p.140) Area AF frame (p.140) Aspect ratio line 16:9 (p.168) Focusing screen Aspect ratio line 1:1 (p.168) Grid (p.79) AF point Spot AF point (p.139) Aspect ratio line 4:3 (p.168) Battery level (p.48) Warning icon (p.489) Shooting mode (p.35) AF operation (p.130) JPEG/RAW (p.162) Flicker detection (p.206) Metering mode (p.243) Drive mode (p.
Nomenclature ISO speed (p.170) Focus indicator (p.94, 131) AE lock (p.249) AEB in-progress (p.247) Flash-ready (p.278) Improper FE lock warning FE lock (p.278) FEB in-progress (p.285) High-speed sync (p.285) Flash exposure compensation (p.278) Maximum burst for continuous shooting (p.167) Number of remaining multiple exposures (p.259) ISO speed (p.170) Consecutive self-timer shots (p.159) Highlight tone priority (p.
Nomenclature LCD Panel Drive mode (p.156, 159) u Single shooting o High-speed continuous shooting i Low-speed continuous shooting B Silent single shooting M Silent continuous shooting Q Self-timer: 10 sec./remote control k Self-timer: 2 sec./remote control q Self-timer: Continuous AF operation (p.130, 305) X One-Shot AF 9 AI Focus AF Z AI Servo AF K Servo AF 4L Manual focus (p.
Nomenclature
Multiple-exposure shooting (p.258) Bluetooth function Warning icon (p.489) Time-lapse movie shooting (p.349) Bulb timer shooting/ Interval timer shooting (p.251/267) Wi-Fi function GPS acquisition status Battery level (p.48) Logging function Exposure compensation (p.245) 34 Exposure level indicator Exposure compensation amount (p.245) AEB range (p.
Nomenclature Mode Dial You can set the shooting mode. Turn the Mode Dial while holding down the Mode Dial center (Mode Dial lock release button). Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting. A : Scene Intelligent Auto (p.94) C : Creative Auto (p.100) 8 : Special scene (p.107) 2 Portrait (p.109) 4 Close-up (p.116) q Group Photo (p.110) P 3 Landscape (p.111) y Candlelight (p.118) Food (p.117) 5 Sports (p.
Nomenclature Creative Zone These modes give you more control for shooting various subjects as desired. d : Program AE (p.234) s : Shutter-priority AE (p.236) f : Aperture-priority AE (p.238) a : Manual exposure (p.241) F : Bulb (p.250) Custom shooting mode You can register the shooting mode (, , , , or ), AF operation, menu settings, etc. to the and Mode Dial positions (p.510).
Nomenclature Battery Charger LC-E6 Charger for Battery Pack LP-E6N/LP-E6 (p.40). Power plug Battery pack slot Charge lamp IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. Battery Charger LC-E6E Charger for Battery Pack LP-E6N/LP-E6 (p.40).
Nomenclature Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The strap also has an attached eyepiece cover (p.270).
1 Getting Started and Basic Camera Operations This chapter describes preparatory steps before you start shooting and the basic camera operations.
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E6 the battery. 3 Recharge For LC-E6 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet. LC-E6E For LC-E6E Connect the power cord to the charger and insert the plug into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Charge the battery before use. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. After recharging the battery, detach it and disconnect the charger from the power outlet. You can attach the cover in a different orientation to indicate whether the battery is recharged or not.
Installing and Removing the Battery Load a fully-charged Battery Pack LP-E6N (or LP-E6) into the camera. The camera’s viewfinder becomes bright when a battery is installed, and darkens when the battery is removed. If the battery is not installed, the image in the viewfinder becomes blurred and you cannot perform focusing. Installing the Battery 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery. 2 Insert Insert the end with the electrical contacts.
Installing and Removing the Card You can use an SD, SDHC, or SDXC memory card (sold separately) with the camera. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing and erasing. Installing the Card 1 Write-protect switch Open the cover. Slide the cover as shown by the arrows to open it. the card. 2 Insert As shown by the illustration, face the card’s label side toward you and insert it until it clicks in place. the cover.
Installing and Removing the Card Removing the Card 1 Access lamp Open the cover. Set the power switch to <2>. Check that the access lamp is off, then open the cover. If [Recording...] is displayed on the LCD monitor, close the cover. the card. 2 Remove Gently push in the card, then let it go to eject. Pull the card straight out, then close the cover. UHS-I SDHC or SDXC memory cards can also be used.
Installing and Removing the Card When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot cover during this time. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera. • Removing the card. • Removing the battery. • Shaking or banging the camera around.
Using the LCD Monitor After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, or play back photos and movies. You can change the direction and angle of the LCD monitor. 1 Flip out the LCD monitor. the LCD monitor. 2 Rotate When the LCD monitor is swung out, 180° 90° 175° you can rotate it up, down, or over 180° to face the subject. The indicated angle is only approximate. it toward you. 3 Face Normally, use the camera with the LCD monitor facing you.
Turning on the Power If you turn on the power switch and the date/time/zone setting screen appears, see page 49 to set the date/time/zone. <1> : The camera turns on. <2> : The camera is turned off and does not function. Set the power switch to this position when not using the camera. Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, sensor cleaning will be performed automatically. (A small sound may be heard.) During the sensor cleaning, the LCD monitor will display .
Turning on the Power z Battery Level Indicator When the power switch is set to <1>, the battery level will be indicated in one of six levels. A blinking battery icon indicates that the battery will soon be exhausted. Display Level (%) 100 - 70 69 - 50 49 - 20 19 - 10 9-1 0 Display Level (%) Number of Possible Shots with Viewfinder Shooting (Approx.
3 Setting the Date, Time, and Zone When you turn on the power for the first time or if the date/time/zone have been reset, the date/time/zone setting screen will appear. Follow the steps below to set the time zone first. Set the camera to the time zone in which you currently live so that when you travel, you can simply change the setting to the correct time zone for your destination, and the camera will automatically adjust the date/ time.
3 Setting the Date, Time, and Zone Press the keys to select [Zone], then press <0>. Press the keys to select the time zone, then press <0>. If your desired time zone is not listed, press the button, then proceed to the next step to set it (with the time difference from the Coordinated Universal Time, UTC). To set the time difference from UTC, press the keys to select a parameter (+/-/hour/minute) for [Time difference]. Press <0> so is displayed.
3 Setting the Date, Time, and Zone saving time. 5 SetSettheit asdaylight necessary. Press the keys to select [Y]. Press <0> so is displayed. Press the keys to select [Z], then press <0>. When the daylight saving time is set to [Z], the time set in step 4 will advance by 1 hr. If [Y] is set, the daylight saving time will be canceled and the time will go back by 1 hour. the setting. 6 ExitPress the keys to select [OK], then press <0>.
3 Selecting the Interface Language 1 Display the menu screen. Press the button to display the menu screen. the [52] tab, select 2 Under [LanguageK]. Press the button and select the [5] tab. Press the keys to select the [52] tab. Press the keys to select [LanguageK], then press <0>. the desired language. 3 SetPress the keys to select the language, then press <0>. X The interface language will change.
Attaching and Detaching a Lens The camera is compatible with all Canon EF lenses. The camera cannot be used with EF-S or EF-M lenses. Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the red mount index on the lens with the red mount index on the camera and turn the lens as shown by the arrow until it clicks in place. the lens’s focus mode switch 3 Set to . stands for autofocus.
Attaching and Detaching a Lens Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. 22 22 m Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera’s power switch to <2>. If the front part (focusing ring) of the lens rotates during autofocusing, do not touch the rotating part.
Basic Shooting Operations Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the AF points in the viewfinder look sharp. If the knob is difficult to turn, remove the eyecup (p.270). If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using E-series Dioptric Adjustment Lenses (sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake.
Basic Shooting Operations Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder and on the LCD panel for approx. 4 sec. (metering timer/0). Pressing Completely This releases the shutter and takes the picture.
Basic Shooting Operations Mode Dial Turn the dial while holding down the lock release button at the center of the dial. Use it to set the shooting mode. 6 Main Dial (1) After pressing a button, turn the <6> dial. When you press a button such as , , , or , the respective function remains selectable for approx. 6 sec. (9). During this time, you can turn the <6> dial to change the setting.
Basic Shooting Operations 5 Quick Control Dial (1) After pressing a button, turn the <5> dial. When you press a button such as , , or , the respective function remains selectable for approx. 6 sec. (9). During this time, you can turn the <5> dial to change the setting. When the timer ends or if you press the shutter button halfway, the camera will go back to shooting-ready state. Use this dial to select the AF operation, ISO speed, metering mode, AF point, etc. (2) Turn only the <5> dial.
Basic Shooting Operations 9 Multi-controller The <9> consists of an eight-direction key. Use it to select the AF point, correct the white balance, move the AF point or magnifying frame during Live View shooting or movie shooting, set the Quick Control, etc. You can also use it to select menu items. Correcting the white balance and moving the magnifying frame during playback can be done even with the switch set upward (Multi Function Lock).
Basic Shooting Operations U LCD Panel Illumination You can illuminate the LCD panel by pressing the button. Turn on (9) or off the LCD panel illumination by pressing the button. During a bulb exposure, pressing the shutter button completely will turn off the LCD panel illumination. Displaying the Quick Control Screen After you press the button a number of times (p.84), the Quick Control screen (p.86) will appear. You can then check the current shooting function settings.
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor with intuitive operations. This is called Quick Control. 1 Press the button (7). X The Quick Control screen will appear. the desired functions. 2 SetPress the keys to select a function. X The settings of the selected function and Feature guide (p.90) will appear. Turn the <6> or <5> dial to change the setting. Basic Zone modes Creative Zone modes the picture.
Q Quick Control for Shooting Functions Functions Settable with the Quick Control Creative Zone modes Shutter speed (p.236) Aperture (p.238) Flash exposure compensation (p.278, 285) Exposure compensation/ AEB setting (p.245/247) ISO speed (p.170) Wi-Fi function Picture Style (p.176) Custom Controls (p.497) AF operation (p.130) Image-recording quality (p.162) Auto Lighting Optimizer (p.194) White balance (p.185) AF Area selection mode/ AF point selection White balance correction (p.
Q Quick Control for Shooting Functions Quick Control Ð <0> Select the desired function and press <0>. The function setting screen will appear. Turn the <6> or <5> dial, then press the keys to change the setting. There are also functions that are set by pressing a button following these operations. Press <0> to finalize the setting and return to the previous screen. When you select <7> (p.497), (p.134), or , and press the button to exit the setting.
3 Menu Operations and Configurations You can configure various settings with the menus such as the imagerecording quality, date/time, etc. button button <6> Main Dial LCD monitor <5> Quick Control Dial Multi-controller keys <0> button Basic Zone Modes Menu Screen * In Basic Zone modes, some tabs and menu items do not appear.
3 Menu Operations and Configurations Menu Setting Procedure 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Each time you press the button, the main tab (group of functions) will switch. Press the Multi-controller’s keys to select a secondary tab. For example, the [z3] tab in this manual refers to the screen displayed when the z (Shooting) tab’s third box [ ] from the left is selected. the desired item.
3 Menu Operations and Configurations The description of menu functions hereafter assumes that you have pressed the button to display the menu screen. You can also tap on the menu screen or turn the <6> or <5> dial to operate the menu. To cancel the operation, press the button. For details about each menu item, see page 534. Dimmed Menu Items Example: Highlight tone priority Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it.
d Operating the Camera with Touch Screen You can operate the camera by tapping on the LCD monitor (touchsensitive panel) with your fingers. Tap Sample Screen (Quick Control) Use your finger to tap on (touch briefly and then remove your finger from) the LCD monitor. By tapping, you can select menus, icons, etc. displayed on the LCD monitor. For example, when you tap on [Q], the Quick Control screen appears. By tapping on [Q], you can return to the preceding screen.
d Operating the Camera with Touch Screen Drag Sample Screen (Menu screen) Slide your finger while touching the LCD monitor.
d Operating the Camera with Touch Screen 3 Setting the Touch Control Response 1 Select [Touch control]. Under the [54] tab, select [Touch control], then press <0>. the touch control response 2 Set setting. Select the desired setting, then press <0>. [Standard] is the normal setting. [Sensitive] provides a more reactive touch screen response than [Standard]. Try using both settings and select the one you prefer. To disable touch operations, select [Disable].
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc. before formatting the card. 1 Select [Format card]. Under the [51] tab, select [Format card], then press <0>. the card.
3 Formatting the Card Format the card in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed (p.567). Low-level Formatting Perform low-level formatting if the card’s writing or reading speed seems slow or if you want to totally erase the data on the card. Since low-level formatting will format all recordable sectors on the card, the formatting will take longer than normal formatting.
3 Formatting the Card If you format an SDXC card with this camera and then insert it into another camera, an error may be displayed and the card may become unusable. Certain computer operating systems or card readers may not recognize a card formatted in exFAT. When the card is formatted or data is erased, only the file management information is changed. The actual data is not completely erased. Be aware of this when selling or discarding the card.
Before You Start 3 Disabling the Beeper You can prevent the beeper from sounding when focus is achieved, during self-timer shooting, and during touch operations. 1 Select [Beep]. Under the [54] tab, select [Beep], then press <0>. [Disable]. 2 Select Select [Disable], then press <0>. X The beeper will not sound. If [Touch ] is selected, the beeper will be silent only for touch operations.
Before You Start 3 Setting the Image Review Time You can set how long the image is displayed on the LCD monitor immediately after shooting. To keep the captured image displayed, set [Hold]. To not have the captured image displayed, set [Off]. 1 Select [Image review]. Under the [z1] tab, select [Image review], then press <0>. the desired time. 2 SetSelect the desired setting, then press <0>. If [Hold] is set, the image will be displayed until the auto power off time elapses.
Before You Start 3 Reverting the Camera to the Default SettingsN The camera’s shooting function settings and menu settings can be reverted to their defaults. 1 Select [Clear all camera settings]. Under the [55] tab, select [Clear all camera settings], then press <0>. [OK]. 2 Select X The camera settings will be reset to the default settings shown on pages 76-78. For how to clear all the Custom Function settings, see page 468.
Before You Start Shooting Function Settings AF operation AF area selection mode Lens electronic MF Metering mode One-Shot AF Automatic selection AF Disable after OneShot AF q (Evaluative metering) zISO speed settings ISO speed Auto ISO speed range Auto range Minimum: 100 Maximum: 40000 Minimum: 100 Maximum: 12800 Minimum shutter Auto speed for auto Drive mode u (Single shooting) Exposure Canceled compensation/AEB Flash exposure Canceled compensation Multiple exposure Disable HDR mode Disable HDR Interv
Before You Start Camera Settings Image review time 2 sec. Release shutter Enable without card Image jump w/6 e (10 images) Highlight alert Disable AF point display Disable Playback grid Off Histogram display Brightness Magnification 2x (magnify from center) (Approx.) Control over HDMI Disable Vertical image auto OnzD rotation Wireless communication settings Wi-Fi Disable Bluetooth function Disable Auto power off 1 min.
Before You Start Movie Shooting Settings Movie recording size NTSC:L6X PAL:L5X Sound recording Auto Movie Servo AF AF method Enable u+Tracking Wind filter Auto Movie Servo AF track sensitivity Attenuator Disable Movie Servo AF Speed kISO speed settings When active 0 Always on 0 (Standard) ISO speed Auto ISO speed range Minimum: 100 Maximum: 25600 Metering timer 8 sec.
3 Displaying the Grid in the Viewfinder You can display a grid in the viewfinder to help you check the camera tilt or compose the shot. 1 Select [Viewfinder display]. Under the [52] tab, select [Viewfinder display], then press <0>. 2 Select [Grid display]. [Show]. 3 Select X When you exit the menu, the grid will appear in the viewfinder. You can display a grid on the LCD monitor during Live View shooting and before you start shooting a movie (p.302, 377).
3 Displaying the Electronic Level You can display the electronic level on the LCD monitor and in the viewfinder to help you correct the camera tilt. Displaying the Electronic Level on the LCD Monitor 1 Press the button. Each time you press the button, the screen display will change. Display the electronic level. If the electronic level does not appear, set [54: z button display options] so that the electronic level can be displayed (p.84). the camera’s tilt.
3 Displaying the Electronic Level 3 Displaying the Electronic Level in the Viewfinder An electronic level can be displayed on the upper part of the viewfinder. Since this indicator is displayed during shooting, you can take the picture while checking the camera tilt. 1 Select [Viewfinder display]. Under the [52] tab, select [Viewfinder display], then press <0>. 2 Select [Electronic level]. 3 Select [Show]. the shutter button halfway.
3 Setting the Viewfinder Information DisplayN The shooting function settings (Battery level, Shooting mode, AF operation, Image quality (image type), Drive mode, Metering mode, Flicker detection) can be displayed in the viewfinder. By default, only Flicker detection is checkmarked [X]. 1 Select [Viewfinder display]. Under the [52] tab, select [Viewfinder display], then press <0>. 2 Select [Show/hide in viewfinder]. [X] the information to 3 Checkmark be displayed.
3 Setting the Viewfinder Information DisplayN If no card is inserted in the camera, the image-recording quality (image type: JPEG/RAW) will not be displayed.
B Button Functions During viewfinder shooting, when you press the button with the camera being ready to shoot, you can toggle the display between the electronic level (p.80) and Quick Control screen (p.86). [z button display options] under the [54] tab enables you to select the options displayed when the button is pressed. Select the desired display option, then press <0> to add a checkmark [X]. Then select [OK] to register the setting.
B Button Functions If you turn off the power with the electronic level or Quick Control screen displayed, the same screen will be displayed when you turn on the power again. To cancel this function, press the button a number of times until the screen is blank, then turn off the power switch. You cannot remove the checkmarks from both items. Even if you set the [Electronic level] not to be displayed, it will still be displayed for Live View shooting and movie shooting by pressing the button.
B Button Functions Quick Control Screen Aperture Shutter speed Shooting modes AE lock Highlight tone priority ISO speed Exposure level indicator Flash exposure compensation Exposure compensation Wi-Fi function White balance correction Custom Controls Image-recording quality Picture Style AF operation Possible shots/ Auto cleaning Quick Control icon Battery level White balance AF Area selection mode/ AF point selection Wi-Fi signal strength/ Eye-Fi card transmission status Metering mode Logging fu
B Button Functions Button Operations with Quick Control Screen Displayed When you press the , , , , , or button, the setting screen appears and you can set it with <6>, <5>, <9>, or button. AF operation ISO speed Drive mode Metering mode AF Area / AF point selection If nothing is displayed even if you press a button, press the button to display the electronic level or Quick Control screen. Then press any of the above buttons to display the respective screen.
R Setting the Multi Function Lock By setting the switch upward, you can prevent the settings from being changed by accidentally operating the Main Dial, Quick Control Dial, or Multi-controller or by inadvertently tapping on the touch screen. For details on the Multi function lock switch, see page 59. 1 Select [Multi function lock]. Under the [54] tab, select [Multi function lock], then press <0>. Add a checkmark [X] to the 2 camera control to be locked.
Setting the Shooting Mode Guide When you turn the Mode Dial to select a shooting mode, a brief description (shooting mode guide) of the shooting mode can be displayed on the screen. During viewfinder shooting, the mode guide appears when the Quick Control screen or electronic level is displayed. By default, it is set to [Enable]. 1 Select [Mode guide]. Under the [53] tab, select [Mode guide], then press <0>. [Enable]. 2 Select If you do not want the Mode guide to appear, select [Disable]. the Mode Dial.
Setting the Feature Guide When using Quick Control, a brief description (feature guide) of the selected function can be displayed. The Feature guide can be displayed during viewfinder shooting, Live View shooting, and movie shooting. By default, it is set to [Enable]. 1 Select [Feature guide]. Under the [53] tab, select [Feature guide], then press <0>. [Enable]. 2 Select If you do not want the Feature guide to appear, select [Disable]. the camera ready to shoot, 3 With press the button.
Help When [zHelp] is displayed at the bottom of the menu screen, the feature’s description (Help) can be displayed. Press the button to display the Help. Press it again to turn off the Help display. If the Help fills more than one screen, a scroll bar will appear on the right edge. In such a case, press keys or turn the <5> dial to scroll. Example: [z3: High ISO speed NR] B Î Scroll bar Example: [54: Multi function lock] B Î Example: [8C.
Help Help Display Text Size You can select the text size for the Help display. By default, it is set to [Small]. 1 Select [Help text size]. Under the [53] tab, select [Help text size], then press <0>. the text size. 2 SetSelect [Small] or [Standard], then press <0>.
2 Basic Shooting This chapter describes how to use the Basic Zone modes on the Mode Dial for best results. as i m c Zo od ne es With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically (p.127, 526). Also, because advanced shooting function settings cannot be changed, you can enjoy shooting photographs without worrying about botched pictures due to misoperation.
A Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject (p.97). 1 Area AF frame Set the Mode Dial to . Turn the Mode Dial while holding down the lock release button at the center. When the shooting mode description appears on the LCD monitor, press <0> to hide it (p.89).
A Fully Automatic Shooting (Scene Intelligent Auto) the picture. 4 TakePress the shutter button completely to take the picture. X The captured image will be displayed for approx. 2 sec. on the LCD monitor. The mode makes the colors look more impressive in nature, outdoor, and sunset scenes. If you do not obtain the desired color tones, change the mode to a Creative Zone mode (p.36) and select a Picture Style other than , then shoot again (p.176).
A Fully Automatic Shooting (Scene Intelligent Auto) The beeper continues to beep softly. (The focus indicator does not light up.) It indicates that the camera is focusing continuously on a moving subject. (The focus indicator does not light up.) You can take sharp pictures of a moving subject. Note that focus lock (p.97) will not work in this case. Pressing the shutter button halfway does not focus the subject.
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. In the mode, pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock”.
A Full Auto Techniques (Scene Intelligent Auto) A Live View Shooting You can shoot while viewing the image on the LCD monitor. This is called “Live View shooting”. For details, see page 289. 1 Set the Live View shooting/Movie shooting switch to . the Live View image on 2 Display the LCD monitor. Press the <0> button. X The Live View image will appear on the LCD monitor. on the subject. 3 Focus Press the shutter button halfway to focus.
A Full Auto Techniques (Scene Intelligent Auto) You can also rotate the LCD monitor to shoot at different angles. For details, see page 46.
C Creative Auto Shooting is a fully-automatic shooting mode that is a step more advanced from . You can first adjust the photo’s ambience, background blur, etc. before shooting. By pressing the button, you can set 1. Ambience-based shots, 2. Background blur setting, 3. Drive mode, and 4. AF point selection with Quick Control. * stands for Creative Auto. 1 Set the Mode Dial to . the button (7). 2 Press X The Quick Control screen (p.126) will appear. the desired functions.
C Creative Auto Shooting (1) Ambience-based shots (4) AF point selection (2) Background blur Possible shots Battery level Image-recording quality (3) Drive mode (1) Ambience-based shots You can select and shoot with the ambience you want to convey in your images. Turn the <6> or <5> dial to select the ambience. With the (1) item selected, press <0> to display the screen shown on the left. You can then select the ambience from the displayed list. Press the keys to select the desired ambience.
C Creative Auto Shooting Ambience Settings gAmbience: Standard This provides standard image characteristics. h Vivid The subject looks crisp, sharp and vivid. Effective for making the picture look more impressive than with [g Ambience: Standard]. i Soft The subject is less defined, giving the picture a softer and daintier look. Good for portraits, pets, flowers, etc. j Warm The subject is less defined with a warmer color cast, giving the picture a warmer and gentler look.
C Creative Auto Shooting (2) Background blur You can adjust the degree of background blur. Turn the <6> or <5> dial to set the effect. With the (2) item on page 101 selected, press <0> to display the screen shown on the left. While looking at the gauge, you can turn the <6> or <5> dial to set the degree. Note that you can preview the resulting effect of “Background blur” before shooting by pressing the <0> button and switching to Live View shooting (p.106).
C Creative Auto Shooting (3) Drive mode You can select single shooting, continuous shooting, or self-timer. Turn the <6> or <5> dial to select the desired mode. Pressing <0> will display the screen shown on the left. Turn the <6> dial to select the desired setting. For drive modes, see page 156. (4) AF point selection Turn the <6> or <5> dial to select the desired AF Area selection mode. Pressing <0> will display the screen shown on the left. You can then select the AF Area selection mode and AF point.
C Creative Auto Shooting Using Effect Preview in Live View Shooting In the mode, when you set the [Ambience-based shots] or [Background blur], shooting while checking the resulting effect on the Live View image is recommended. 1 Display the Live View image. Set the Live View/Movie shooting switch to , then press the <0> button. Press the shutter button halfway, then focus on the subject. the button. 2 Press X The Quick Control screen will appear (7). the desired ambience.
C Creative Auto Shooting [Background Blur]. 5 SetPress the button to exit the Quick Control. Turn the <6> or <5> dial to adjust the blur while checking it on the screen (p.103). While you adjust it, [Simulating blur] will be displayed. the picture. 6 TakePress the shutter button completely. To return to viewfinder shooting, press the <0> button to exit Live View shooting. The Live View image shown with the ambience setting applied will not look exactly the same as the captured image.
8: Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. * <8> stands for Special Scene. 1 Set the Mode Dial to <8>. the button (7). 2 Press X The Quick Control screen will appear. [Choose scene]. 3 Select Press the or keys to select [Choose scene], then press <0>. a shooting mode. 4 Select Press the keys to select the shooting mode, then press <0>.
8: Special Scene Mode SCN Modes 2: Portrait (p.109) q: Group Photo (p.110) 3: Landscape (p.111) 5: Sports (p.112) C: Kids (p.113) r: Panning (p.114) 4: Close-up (p.116) P: Food (p.117) y: Candlelight (p.118) 6: Night Portrait (p.119) F: Handheld Night Scene (p.120) G: HDR Backlight Control (p.
8: 2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
8: q Shooting Group Photos Use the (Group Photo) mode to shoot group photos. You can take a picture in which both the people in the front and people in the back are all in focus. Shooting Tips Use a wide-angle lens. When using a zoom lens, use the wide-angle end to make it easy to get all the people in the group in focus at once, from the front row to the back.
8: 3 Shooting Landscapes Use the <3> (Landscape) mode for expansive scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus. It also adds breadth to landscapes. Shooting night scenes. Shooting with <3> while handholding the camera may cause camera shake. Using a tripod is recommended.
8: 5 Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips Use a telephoto lens. Use of a telephoto lens is recommended to enable shooting from a distance. Track the subject with the Area AF frame. After aiming the Area AF frame over the subject, press the shutter button halfway to start focusing. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink.
8: C Photographing Children To photograph the children running around, use (Kids). Skin tones will look healthy. Shooting Tips Track the subject with the Area AF frame. After aiming the Area AF frame over the subject, press the shutter button halfway to start focusing. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink. Shoot continuously. The default setting is (High-speed continuous shooting).
8: r Panning If you want to take a picture with the feel of speed and a blurred motion effect on the subject’s background, use (Panning). With Live View shooting, if you use a lens supporting the mode, subject blur is detected, corrected, and reduced. Shooting Tips Turn the camera to follow the moving subject. When shooting, turn the camera smoothly as you track the moving subject.
8: r Panning Set the level of background motion blur. With [Effect], you can set the level of background motion blur. The [Max] setting will set a slower shutter speed to increase the background motion blur around the subject. If the subject blur is noticeable, set [Effect] to [Med] or [Min] to reduce the blur. See the cautions on page 122. To see which lenses support the mode, refer to the Canon Web site.
8: 4 Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject. Check the lens for its minimum focusing distance.
8: P Shooting Food When you want to take pictures of food, use
(Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips Change the color tone. You can change [Color tone]. To increase the food’s reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red. See the cautions on page 123.
8: y Shooting Candlelight Portraits When you want to photograph a person in candlelight, use (Candlelight). The atmosphere of candlelight is reflected in the color tones of the picture. Shooting Tips Use the center AF point to focus. Aim the center AF point in the viewfinder on the subject, then shoot. Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
8: 6 Shooting Night Portraits (With a Tripod) When you want to photograph people at night and obtain a naturallooking night scene in the background, use the <6> (Night Portrait) mode. Note that an external Speedlite is required for shooting. Using a tripod is recommended. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, since camera shake is prone to occur with handheld shooting, use a tripod. Check the subject’s brightness.
8: F Shooting Night Scenes (Handheld) Using a tripod when shooting a night scene gives the best results. However, the (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. In this shooting mode, four shots are taken consecutively for each picture, and the resulting one image with reduced camera shake is recorded. Shooting Tips Hold the camera firmly. During shooting, hold the camera firmly and steadily.
8: G Shooting Backlit Scenes When shooting a scene having both the bright and dark areas, use the (HDR Backlight Control) mode. When you take one picture in this mode, three consecutive shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting. * HDR stands for High Dynamic Range. Shooting Tips Hold the camera firmly. During shooting, hold the camera firmly and steadily.
Cautions for the <8> Modes • Group Photo Since distortion correction is applied, the camera records an image area narrower than the one seen through the viewfinder. (The image periphery is slightly trimmed and the resolution looks slightly lowered.) Also, during Live View shooting, the angle of view changes slightly. Depending on the shooting conditions, focus may not be attained for everyone from the front to the back of the image.
• Panning (continued) If the lens does not support the mode, subject blur will not be corrected. However, the automatic shutter speed adjustment alone will take effect according to the setting of [Effect]. When shooting under bright light such as a sunny summer day or when shooting a slow subject, the set degree of panning effect may not be obtained.
• <6> Night Portrait Tell the subject to keep still even after the flash fires. During Live View shooting, achieving focus may be difficult when the face of the subject looks dark. In such a case, set the lens’s focus mode switch to and focus manually. When you shoot a night scene with Live View shooting, achieving focus with AF may be difficult if point sources of light are found in the AF point. In such a case, set the lens’s focus mode switch to and focus manually.
• Handheld Night Scene (continued) If you shoot a moving subject, the subject’s movement may leave afterimages, or the surrounding area of the subject may become dark. The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.), flat or single-tone images, or images significantly misaligned due to camera shake. It takes some time to record images to the card since they are merged after shooting.
Q Quick Control In Basic Zone modes, pressing the button sets the items shown in the tables on the next page with the Quick Control. Example: mode the Mode Dial to a Basic Zone 1 Set mode. the button (7). 2 Press X The Quick Control screen will appear. the desired function. 3 SetPress the or keys to select a function. X The settings of the selected function and Feature guide (p.90) will appear. Turn the <6> or <5> dial to change the setting.
Q Quick Control Settable Functions in Basic Zone Modes o: Default setting*1 k: User selectable Function : Not selectable A C k Ambience-based shots (p.101) k Background blur (p.103) Drive mode (p.156) Single shooting o o High-speed continuous shooting k k Low-speed continuous shooting k k Silent single shooting*2 k k Silent continuous shooting*2 k k 10-sec. self-timer/Remote control k k 2-sec.
Q Quick Control o: Default setting*1 k: User selectable Function 4 Color tone (p.106) P y k k 6 F k G k k k k Single shooting o o o o o o High-speed continuous shooting k k k k k k Low-speed continuous shooting k k k k k k Silent single shooting*2 k k k k k k Silent continuous shooting*2 k k k k k k 10-sec. self-timer/Remote control k k k k k k 2-sec.
3 Setting the AF and Drive Modes The AF points in the viewfinder are arranged to make AF shooting suitable for a wide variety of subjects and scenes. You can also select the AF operation and drive mode that best match the shooting conditions and subject. The M icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (, , , , ). In Basic Zone modes, the AF operation is set automatically. stands for autofocus.
f: Selecting the AF OperationN You can select the AF operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1 Set the lens’s focus mode switch to . 22 22 m the Mode Dial to a Creative 2 Turn Zone mode. 3 Press the button (9). the AF operation. 4 Select While looking at the LCD panel or the viewfinder, turn the <6> or <5> dial.
f: Selecting the AF OperationN One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. AF point Focus indicator The AF point that achieves focus is displayed, and the focus indicator in the viewfinder will also light up. With the camera in the default settings and the metering mode set to the evaluative metering (p.243), the exposure setting is set at the same time the focus is achieved.
f: Selecting the AF OperationN AI Servo AF for Moving Subjects This AF operation is suited for moving subjects when the focusing distance keeps changing. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. The exposure is set at the moment the picture is taken. When the AF area selection mode (p.139) is set to Automatic selection AF, focus tracking will continue as long as the Area AF frame covers the subject.
f: Selecting the AF OperationN AF Points Lighting Up in Red By default, the AF points light up in red when focus is achieved in lowlight conditions or on a dark subject. In Creative Zone modes, you can set whether to have the AF points light up in red when focus is achieved (p.488).
S Selecting the AF Area and AF Point The camera has 45 AF points for autofocusing. You can select the AF area selection mode and AF point(s) suiting the scene or subject. Depending on the lens used, the number of usable AF points, AF point patterns, Area AF frame shape, etc. vary. For details, see “Lenses and Usable AF Points” on page 145. AF Area Selection Mode You can select one of five AF area selection modes. For the selection procedure, see page 136.
S Selecting the AF Area and AF Point G Large Zone AF (Manual selection of zone) The AF area is divided into three focusing zones (left, center, and right) for focusing. H Automatic selection AF The Area AF frame (entire AF area) is used to focus.
S Selecting the AF Area and AF Point Selecting the AF Area Selection Mode 1 Press the or button (9). Look through the viewfinder and press the or button. the button. 2 Press Each time you press the button, the AF area selection mode changes. In the <8: y> mode, you cannot select the AF area. Single-point AF (fixed at center) is applied for shooting. In Basic Zone modes, any of the following operations will revert the AF area and AF point settings to the default.
S Selecting the AF Area and AF Point Selecting the AF Point Manually You can manually select the AF point or zone. 1 Press the or button (9). X The AF points will be displayed in the viewfinder. In the Zone AF mode or Large Zone AF mode, the selected zone will be displayed. an AF point. 2 Select The AF point selection will change in the direction you tilt <9>. If you press <0>, the center AF point (or center zone) will be selected.
S Selecting the AF Area and AF Point AF Point Display Indications Pressing the or button lights up the AF points that are cross-type AF points for high-precision autofocusing. The blinking AF points are horizontal-line or vertical-line sensitive. For details, see pages 143-148.
AF Area Selection Mode Single-point Spot AF (Manual selection) For pinpoint focusing over a narrower area than with Single-point AF. Select one AF point to focus. Effective for pinpoint focusing or focusing on overlapping subjects such as an animal in a cage. Since Single-point Spot AF covers a very small area, focusing may be difficult during handheld or low-light shooting or for a moving subject. Single-point AF (Manual selection) Select one AF point to be used for focusing.
AF Area Selection Mode Large Zone AF (Manual selection of zone) The AF area is divided into three focusing zones (left, center, and right) for focusing. Since the focusing area is larger than with Zone AF and all the AF points in the selected zone are used for Automatic selection AF, it is superior to Single-point AF in tracking the subject, and it is effective for moving subjects. However, since it is inclined to focus on the nearest subject, focusing on a specific target may be more difficult.
AF Area Selection Mode When AI Servo AF mode is set for Zone AF, Large Zone AF, or Automatic selection AF, the active AF point will keep switching to track the subject. However, under certain shooting conditions (such as when the subject is small), it may not be able to track the subject. With Single-point Spot AF, focusing with an EOS-dedicated, external Speedlite’s AF-assist beam may be difficult.
AF Area Selection Mode AF Using Color Tracking With the camera in its default state, if the AF area selection mode is set to Zone AF (Manual selection of zone), Large Zone AF (Manual selection of zone), or Auto selection AF, color tracking AF detecting colors comparable to human skin tones will be performed (except in <8: 3r4Py6F> modes). For details, see [8C.Fn II-12: Auto AF pt sel.:Color Tracking] on page 485.
AF Sensor The camera’s AF sensor has 45 AF points. The illustration below shows the AF sensor pattern corresponding to each AF point. When using lenses with a maximum aperture of f/2.8 or faster, high-precision AF is possible at the viewfinder center. Depending on the lens used, the number of usable AF points, AF point patterns, Area AF frame shape, etc. vary. For details, see “Lenses and Usable AF Points” on page 145. Diagram Cross-type focusing: f/5.6 vertical + f/5.
AF Sensor This focusing sensor is geared to obtain higher precision focusing for lenses with a maximum aperture of f/2.8 or faster. A diagonal cross pattern makes it easier to focus on the subjects that may be difficult to focus. It is provided at the center AF point. These focusing sensors are geared for lenses with a maximum aperture of f/5.6 or faster (and some supporting f/8). Since they have a horizontal pattern, they can detect vertical lines. They cover all 45 AF points.
Lenses and Usable AF Points Although the camera has 45 AF points, the number of usable AF points, focusing patterns, Area AF frame shape, etc. vary depending on the lens. The lenses are thereby classified into eight groups from A to H. Using a lens in Groups E to H will have fewer usable AF points. Lens groups are listed on pages 149-152. Check which group your lens belongs to. When you press the or button, the AF points at the position indicated by the mark will blink.
Lenses and Usable AF Points Group B Autofocusing with 45 points is possible. All the AF area selection modes are selectable. : Cross-type AF point. Subject tracking performance is superior and high-precision focusing is achieved. Group C Autofocusing with 45 points is possible. All the AF area selection modes are selectable. : Cross-type AF point. Subject tracking performance is superior and high-precision focusing is achieved. : AF points sensitive to horizontal lines.
Lenses and Usable AF Points Group E Autofocusing with the 35 points is possible. (Not possible with all 45 AF points.) All the AF area selection modes are selectable. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different from 45-point Automatic selection AF. : Cross-type AF point. Subject tracking performance is superior and high-precision focusing is achieved. : AF points sensitive to horizontal lines. : Disabled AF points (not displayed).
Lenses and Usable AF Points Group G Autofocusing with 27 points is possible. (Not possible with all 45 AF points.) Large Zone AF (manual selection of zone) cannot be selected in AF area selection mode. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different from 45-point Automatic selection AF. : Cross-type AF point. Subject tracking performance is superior and high-precision focusing is achieved. : AF points sensitive to horizontal lines.
Lenses and Usable AF Points Lens Group Designations EF14mm f/2.8L USM EF14mm f/2.8L II USM EF15mm f/2.8 Fisheye EF20mm f/2.8 USM EF24mm f/1.4L USM EF24mm f/1.4L II USM EF24mm f/2.8 EF24mm f/2.8 IS USM EF28mm f/1.8 USM EF28mm f/2.8 EF28mm f/2.8 IS USM EF35mm f/1.4L USM EF35mm f/1.4L II USM EF35mm f/2 EF35mm f/2 IS USM EF40mm f/2.8 STM EF50mm f/1.0L USM EF50mm f/1.2L USM EF50mm f/1.4 USM EF50mm f/1.8 EF50mm f/1.8 II EF50mm f/1.8 STM EF50mm f/2.5 Compact Macro EF50mm f/2.
Lenses and Usable AF Points EF300mm f/4L IS USM EF300mm f/4L IS USM + Extender EF1.4x I/II/III EF300mm f/4L IS USM + Extender EF2x I/II/III EF400mm f/2.8L USM EF400mm f/2.8L USM + Extender EF1.4x I/II/III EF400mm f/2.8L USM + Extender EF2x I/II/III EF400mm f/2.8L II USM EF400mm f/2.8L II USM + Extender EF1.4x I/II/III EF400mm f/2.8L II USM + Extender EF2x I/II/III EF400mm f/2.8L IS USM EF400mm f/2.8L IS USM + Extender EF1.4x I/II/III EF400mm f/2.8L IS USM + Extender EF2x I/II/III EF400mm f/2.
Lenses and Usable AF Points EF28-70mm f/2.8L USM EF28-70mm f/3.5-4.5 EF28-70mm f/3.5-4.5 II EF28-80mm f/2.8-4L USM EF28-80mm f/3.5-5.6 EF28-80mm f/3.5-5.6 USM EF28-80mm f/3.5-5.6 II EF28-80mm f/3.5-5.6 II USM EF28-80mm f/3.5-5.6 III USM EF28-80mm f/3.5-5.6 IV USM EF28-80mm f/3.5-5.6 V USM EF28-90mm f/4-5.6 EF28-90mm f/4-5.6 USM EF28-90mm f/4-5.6 II EF28-90mm f/4-5.6 II USM EF28-90mm f/4-5.6 III EF28-105mm f/3.5-4.5 USM EF28-105mm f/3.5-4.5 II USM EF28-105mm f/4-5.6 EF28-105mm f/4-5.6 USM EF28-135mm f/3.
Lenses and Usable AF Points EF90-300mm f/4.5-5.6 USM EF100-200mm f/4.5A EF100-300mm f/4.5-5.6 USM EF100-300mm f/5.6 EF100-300mm f/5.6L EF100-400mm f/4.5-5.6L IS USM EF100-400mm f/4.5-5.6L IS USM + Extender EF1.4x I/II/III EF100-400mm f/4.5-5.6L IS II USM EF100-400mm f/4.5-5.6L IS II USM + Extender EF1.4x I/II EF100-400mm f/4.5-5.6L IS II USM + Extender EF1.4x III EF200-400mm f/4L IS USM Extender 1.4x D B C B B B H (f/8) B H (f/8) G (f/8) B EF200-400mm f/4L IS USM Extender 1.4x: With built-in Ext. 1.
When Autofocus Fails Autofocus may fail to achieve focus (focus indicator in the viewfinder blinks) with special subjects such as the following: Subjects Difficult to Focus on Subjects with very low contrast (Example: Blue skies, solid-color flat surfaces, etc.) Subjects in very low light Strongly backlit or reflective subjects (Example: Cars with highly reflective bodies, etc.) Near and distant subjects positioned close to an AF point (Example: Animals in cages, etc.
MF: Manual Focus If focus cannot be achieved with autofocus, follow the procedure below to focus manually. 1 Set the lens’s focus mode switch to . X <4 L> will be displayed on the LCD panel. 22 22 m Focusing ring on the subject. 2 Focus Turn the lens focusing ring until the subject looks sharp in the viewfinder. If you press the shutter button halfway during manual focusing, the AF point that achieved focus will be displayed, and the focus indicator will light up in the viewfinder.
3 Setting Lens Electronic MFN With the following USM and STM lenses equipped with electronic manual focusing, you can set whether to use electronic manual focusing after autofocusing in One-Shot AF mode. The default setting is [Disable after One-Shot AF]. EF50mm f/1.0L USM EF85mm f/1.2L USM EF85mm f/1.2L II USM EF200mm f/1.8L USM EF300mm f/2.8L USM EF600mm f/4L USM EF400mm f/2.8L USM EF1200mm f/5.6L USM EF400mm f/2.8L II USM EF28-80mm f/2.8-4L USM EF500mm f/4.5L USM EF70-300mm f/4-5.
i Selecting the Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. 1 Press the button (9). the drive mode. 2 Select While looking at the LCD panel or in the viewfinder, turn the <6> dial. u : Single shooting When you press the shutter button completely, only one shot will be taken. o : High-speed continuous shooting When you hold down the shutter button completely, you can shoot continuously at max. approx. 6.5 shots/sec.
i Selecting the Drive Mode i : Low-speed continuous shooting While you hold down the shutter button completely, you can shoot continuously at max. approx. 3.0 shots/sec. (except the mode). Note that during Live View shooting, if [AF operation] is set to [Servo AF], subject tracking is given priority (Subject-tracking priority) at a continuous shooting speed of max. approx. 3.0 shots/sec. (except the mode).
i Selecting the Drive Mode The approx. 6.5 shots/sec. maximum high-speed continuous shooting speed (p.156) is achieved under the following conditions: Fully charged battery pack, 1/500 sec. or faster shutter speed, maximum aperture (varies depending on the lens), at room temperature (23°C / 73°F), flicker reduction disabled, and Live View shooting with One-Shot AF*.
j Using the Self-timer Use the self-timer when you want to be in the picture such as a commemorative photograph. 1 Press the button (9). the self-timer. 2 Select While looking at the LCD panel or in the viewfinder, turn the <6> dial. Q : Shoot in 10 sec. The picture is taken approx. 10 sec. after you press the shutter button completely. Remote control shooting is also possible (p.271). k : Shoot in 2 sec. The picture is taken approx. 2 sec. after you press the shutter button completely.
j Using the Self-timer If you do not look through the viewfinder when you press the shutter button, attach the eyepiece cover (p.270). If stray light enters the viewfinder when the picture is taken, it may throw off the exposure. With , the interval between multiple shots may be prolonged depending on shooting conditions such as the image-recording quality and external flash use. enables you to shoot without touching the camera mounted on a tripod.
4 Image Settings This chapter describes image-related functions: Imagerecording quality, aspect ratio, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, noise reduction, highlight tone priority, lens aberration correction, antiflicker shooting, and other functions. The M icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (, , , , ).
3 Setting the Image-Recording Quality You can select the pixel count and the image quality. Seven JPEG quality settings are provided: 73, 83, 74, 84, 7a, 8a, and b. Three RAW image-recording quality settings are provided: 1, 41, and 61 (p.166). 1 Select [Image quality]. Under the [z1] tab, select [Image quality], then press <0>. image-recording quality. 2 SetTotheselect a RAW setting, turn the <6> dial. To select a JPEG setting, press the or keys.
3 Setting the Image-Recording Quality Image-recording Quality Setting Examples 73 only 1 only 1+73 61+74 163
3 Setting the Image-Recording Quality Guide to Image-Recording Quality Settings Image Quality Pixels Recorded Print Size 26M A2 File Size (MB) Possible Shots 7.5 3.8 (Approx.) Maximum Burst Standard High Speed 1000 110 150 1950 150 150 4.0 1870 150 150 2.1 3570 150 150 2.6 2820 150 150 1.4 5310 150 150 1.8 4170 150 150 JPEG 73 83 74 84 7a 8a b 12M A3 6.5M A4 3.8M A5 RAW 1 26M A2 32.6 200 18 21 41 15M A3 25.3 250 21 23 61 6.5M A4 17.
3 Setting the Image-Recording Quality The number of possible shots is based on Canon’s testing standards and an 8 GB card. The maximum burst during continuous shooting is based on Canon’s standard testing SD card (Standard: 8 GB, High-speed: UHS-I 16 GB) and testing standards ( High-speed continuous shooting, 3:2 aspect ratio, ISO 100, Standard Picture Style).
3 Setting the Image-Recording Quality RAW Images A RAW image is raw data output by the image sensor converted to digital data. It is recorded to the card as is, and you can select the quality as follows: 1, 41, or 61. A 1 image can be processed with [31: RAW image processing] (p.438) and saved as a JPEG image. (41 and 61 images cannot be processed with the camera.) As the RAW image itself does not change, you can process the RAW image to create any number of JPEG images with various processing conditions.
3 Setting the Image-Recording Quality Maximum Burst for Continuous Shooting The approximate maximum burst is displayed at the bottom right of the viewfinder and Quick Control screen. If the maximum burst for continuous shooting is 99 or higher, “99” will be displayed. The maximum burst is displayed even when a card is not inserted in the camera. Make sure that a card is inserted before taking a picture.
3 Setting the Aspect RatioN You can change the image’s aspect ratio. [3:2] is set by default. When [4:3], [16:9], or [1:1] is set, frame lines indicating the image area will be displayed in the viewfinder. During Live View shooting, the image appears with the surrounding area masked in black on the LCD monitor. 1 Select the aspect ratio. Under the [z4] tab, select [Aspect ratio], then press <0>. the aspect ratio. 2 SetSelect an aspect ratio, then press <0>.
3 Setting the Aspect RatioN Aspect Ratio 16:9 4:3 1:1 With viewfinder shooting With Live View shooting Image Quality Aspect Ratio and Pixel Count (Approx.) 3:2 4:3 16:9 1:1 3 6240x4160 5536x4160* 6240x3504* 4160x4160 (26.0 megapixels) (23.0 megapixels) (21.9 megapixels) (17.3 megapixels) 4 4160x2768* 3680x2768* 4160x2336* (11.5 megapixels) (10.2 megapixels) (9.7 megapixels) a 3120x2080 2768x2080* 3120x1752* 2080x2080 (6.5 megapixels) (5.8 megapixels) (5.5 megapixels) (4.
i: Setting the ISO Speed for Still PhotosN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically (p.172). Regarding the ISO speed during movie shooting, see pages 327 and 331. 1 Press the button (9). the ISO speed. 2 SetWhile looking at the LCD panel or the viewfinder, turn the <6> or <5> dial. ISO speed can be set within ISO 100 - ISO 40000 in 1/3-stop increments. “A” indicates ISO Auto.
i: Setting the ISO Speed for Still PhotosN As H1 (equivalent to ISO 51200) and H2 (equivalent to ISO 102400) are expanded ISO speed settings, noise (dots of light, banding, etc.) and irregular colors will be more noticeable, and the resolution lower compared with the standard setting. As L (equivalent to ISO 50) is an expanded ISO speed setting, the dynamic range will be somewhat narrower compared with the standard setting. If [z3: Highlight tone priority] is set to [Enable] (p.
i: Setting the ISO Speed for Still PhotosN ISO Auto If the ISO speed is set to “A” (Auto), the actual ISO speed to be set will be displayed when you press the shutter button halfway. As indicated below, the ISO speed will be set automatically to suit the shooting mode.
i: Setting the ISO Speed for Still PhotosN 3 Setting the Manually-Settable ISO Speed Range You can set the manually-settable ISO speed range (minimum and maximum limits). You can set the minimum limit within L (equivalent to ISO 50) to H1 (equivalent to ISO 51200), and the maximum limit within ISO 100 to H2 (equivalent to ISO 102400). 1 Select [zISO speed settings]. Under the [z2] tab, select [zISO speed settings], then press <0>. 2 Select [ISO speed range]. the minimum limit.
i: Setting the ISO Speed for Still PhotosN 3 Setting the ISO Speed Range for ISO Auto You can set the automatic ISO speed range for ISO Auto within ISO 100 - ISO 40000. You can set the minimum limit within ISO 100 - ISO 25600, and the maximum limit within ISO 200 - ISO 40000. 1 Select [Auto range]. the minimum limit. 2 SetSelect the minimum limit box, then press <0>. Select the ISO speed, then press <0>. the maximum limit. 3 SetSelect the maximum limit box, then press <0>.
i: Setting the ISO Speed for Still PhotosN 3 Setting the Minimum Shutter Speed for ISO Auto You can set the minimum shutter speed so that the shutter speed set automatically will not be too slow when ISO Auto is set. This is effective in the and modes when you use a wideangle lens to shoot a moving subject or when you use a telephoto lens. It helps to reduce camera shake and blurred subjects. 1 Automatically set Manually set Select [Min. shutter spd.]. the desired minimum shutter 2 Set speed.
3 Selecting a Picture StyleN Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. In Basic Zone modes, [D] (Auto) is set automatically. 1 Select [Picture Style]. Under the [z3] tab, select [Picture Style], then press <0>. X The Picture Style selection screen will appear. a Picture Style. 2 Select Select a Picture Style, then press <0>. X The Picture Style will be set.
3 Selecting a Picture StyleN Picture Style Characteristics D Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor and sunset scenes. If the desired color tone is not obtained with [Auto], use another Picture Style. P Standard The image looks vivid, sharp, and crisp. This is a general-purpose Picture Style suitable for most scenes. Q Portrait For nice skin tones. The image looks softer.
3 Selecting a Picture StyleN U Faithful Suited for processing the image with a computer. The color of a subject that is captured in sunlight at a color temperature of 5200K will be adjusted to match the subject’s colorimetrical color. For subdued images with modest brightness and color saturation. V Monochrome Creates black-and-white images. Be careful not to leave the [Monochrome] setting on when you want to shoot photos in color again. Black-and-white images shot in JPEG cannot be turned into color.
3 Selecting a Picture StyleN Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other parameters. The numerals indicate the values for these parameters set for the respective Picture Style.
3 Customizing a Picture StyleN You can customize the Picture Styles. You can change or adjust the parameter settings of Picture Styles such as [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other parameters from the default settings. To see the resulting effects, take test shots. To customize [Monochrome], see page 182. 1 Select [Picture Style]. Under the [z3] tab, select [Picture Style], then press <0>. X The Picture Style selection screen will appear. a Picture Style.
3 Customizing a Picture StyleN the parameter. 4 SetPress the keys to adjust the parameter, then press <0>. Press the button to save the adjusted parameter settings. The Picture Style selection screen will reappear. X The value of parameter settings different from the default will be displayed in blue.
3 Customizing a Picture StyleN V Monochrome Adjustment Besides the effects described on the preceding page such as [Contrast], or [Strength], [Fineness] and [Threshold] for [Sharpness], you can also set [Filter effect] and [Toning effect]. kFilter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N: None Normal black-and-white image with no filter effects.
3 Registering a Picture StyleN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. Useful when you want to preset multiple Picture Styles with different settings. You can also adjust the parameters of a Picture Style that is registered to the camera with EOS Utility (EOS software, p.594) here. 1 Select [Picture Style]. Under the [z3] tab, select [Picture Style], then press <0>.
3 Registering a Picture StyleN a parameter. 5 Select Select the parameter (such as [Strength] under [Sharpness]) to be set, then press <0>. the parameter. 6 SetAdjust the effect level of the parameter, then press <0>. For details, see “Customizing a Picture Style” (p.180). Press the button to register the adjusted parameter settings. The Picture Style selection screen will then reappear. X The base Picture Style will be indicated on the right of [User Def. *].
B: Setting the White BalanceN White balance (WB) is for making the white areas look white. Normally, the Auto [Q] (Ambience priority) or [Qw] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. In Basic Zone modes, [Q] (Ambience priority) is set automatically. (In the
mode, [Qw] (White priority) is set.) 1 Select [White balance].
B: Setting the White BalanceN White Balance To the human eye, a white object looks white regardless of the type of lighting. With a digital camera, the white for color correction basis is decided depending on the color temperature of the illumination, and then the color is adjusted with software to make the white areas look white. With this function, you can take the pictures with natural color tones.
B: Setting the White BalanceN Q Auto White Balance With [Q] (Ambience priority), you can increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [Qw] (White priority), you can reduce the intensity of the image’s warm color cast. If you want to match the Auto white balance of previous EOS DIGITAL camera models, select [Q] (Ambience priority). 1 Select [White balance]. Under the [z2] tab, select [White balance], then press <0>. [Q].
B: Setting the White BalanceN O Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. 1 Shoot a white object. Look through the viewfinder and aim the entire dotted line box (shown in the illustration) over a plain, white object. Focus manually and shoot with the standard exposure set for the white object.
B: Setting the White BalanceN [White balance]. 4 Select Under the [z2] tab, select [White balance], then press <0>. the custom white balance. 5 Select Select [ ], then press <0>. O If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. In step 3, the following images cannot be selected: Images captured with the Picture Style set to [Monochrome], multiple-exposure images, cropped images, and images shot with another camera.
B: Setting the White BalanceN P Setting the Color Temperature You can set the white balance’s color temperature numerically. This is for advanced users. 1 Select [White balance]. Under the [z2] tab, select [White balance], then press <0>. the color temperature. 2 SetSelect [P]. Turn the <6> dial to set the desired color temperature, then press <0>. The color temperature can be set from approx. 2500 K to 10000 K in 100 K increments.
u White Balance CorrectionN You can correct the white balance that is set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This function is for advanced users, particularly for those users who understand the use of color temperature conversion and color compensating filters and their effects. White Balance Correction 1 Select [WB Shift/Bkt.].
u White Balance CorrectionN White Balance Auto Bracketing With just one shot, three images with different color tones can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias and magenta/green bias. This function is called white balance bracketing (WB Bkt.). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
u White Balance CorrectionN During white balance bracketing, the maximum burst for continuous shooting will be lower. Since three images are recorded for one shot, it takes longer to record the image to the card. You can also set white balance correction and AEB together with white balance bracketing. If you set AEB in combination with white balance bracketing, a total of nine images will be recorded for a single shot. During Live View shooting with WB bracketing set, the white balance icon will blink.
3 Auto Correction of Brightness and ContrastN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured. In Basic Zone modes, [Standard] is set automatically. 1 Select [Auto Lighting Optimizer]. Under the [z2] tab, select [Auto Lighting Optimizer], then press <0>. the setting.
3 Setting Noise ReductionN High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. 1 Select [High ISO speed NR]. Under the [z3] tab, select [High ISO speed NR], then press <0>. the level. 2 SetSelect the desired noise reduction level, then press <0>.
3 Setting Noise ReductionN Cautions for Setting Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. If you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
3 Setting Noise ReductionN Long Exposure Noise Reduction For images exposed for 1 sec. or longer, noise (dots of light and banding) typical of long exposures can be reduced. 1 Select [Long exp. noise reduction]. Under the [z3] tab, select [Long exp. noise reduction], then press <0>. the desired setting. 2 SetSelect the desired setting, then press <0>. Auto For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected.
3 Setting Noise ReductionN With [Auto] or [Enable] set, the noise reduction process after the picture is taken may take the same amount of time as that for the exposure. However, even when noise reduction process is in progress, you can continue to take pictures as long as the maximum burst indicator in the viewfinder shows “1” or higher. Images taken at high ISO speeds may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting.
3 Highlight Tone PriorityN You can reduce overexposed, clipped highlights. 1 Select [Highlight tone priority]. Under the [z3] tab, select [Highlight tone priority], then press <0>. [Enable]. 2 Select Highlight details are improved. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. picture. 3 TakeThetheimage will be recorded with highlight tone priority applied.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Peripheral light fall-off is a phenomenon that makes the image corners look darker due to the optical characteristics of the lens. Color fringing along subject outlines is called chromatic aberration. Image distortion due to optical characteristics of the lens is called distortion. And decreased image sharpness due to the aperture is called diffraction phenomenon. These lens aberrations can be corrected.
3 Correction of Lens Aberrations due to Optical CharacteristicsN [Enable]. 3 Select Check that [Correction data available] is displayed for the attached lens. Select [Enable], then press <0>. picture. 4 TakeThetheimage will be recorded with the peripheral illumination corrected. Depending on shooting conditions, noise may appear on the image periphery. The higher the ISO speed, the lower the correction amount will be.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Distortion Correction 1 Select [Distortion correction]. [Enable]. 2 Select Check that [Correction data available] is displayed for the attached lens. Select [Enable], then press <0>. picture. 3 TakeThetheimage will be recorded with the distortion corrected. Since distortion correction is applied, the camera records an image range narrower than the one seen through the viewfinder.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Diffraction Correction 1 Select [Diffraction correction]. [Enable]. 2 Select Select [Enable], then press <0>. picture. 3 TakeThetheimage will be recorded with the diffraction corrected. Depending on shooting conditions, noise may be intensified together with the effects of correction. The higher the ISO speed, the lower the correction amount will be. For movie shooting, [Diffraction correction] will not appear. (Correction is not possible.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Lens Correction Data The lens correction data for lens aberration corrections is registered (stored) in the camera. With [Enable] selected, the peripheral illumination correction, chromatic aberration correction, distortion correction, and diffraction correction will be applied automatically. With EOS Utility (EOS software, p.594), you can check which lenses have their correction data registered in the camera.
3 Correction of Lens Aberrations due to Optical CharacteristicsN General Cautions for Lens Aberration Correction Peripheral illumination correction, chromatic aberration correction, distortion correction, and diffraction correction cannot be applied to JPEG images already taken. When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed.
3 Reducing FlickerN If you shoot an image with a fast shutter speed under a light source such as fluorescent light, the blinking of the light source causes flicker and the image may be vertically unevenly exposed. If continuous shooting is used under these conditions, uneven exposures or colors across the images may result.
3 Reducing FlickerN The color tone of the captured images when [z4: Anti-flicker shoot.] is set to [Enable] may look different from when [Disable] is set. Flicker at a frequency other than 100 Hz or 120 Hz cannot be detected. Also, if the flickering frequency of the light source changes during continuous shooting, effects of the flicker cannot be reduced. If the subject is against a dark background or if there is a bright light in the image, flicker may not be properly detected.
3 Setting the Color SpaceN The range of reproducible colors is called “color space”. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In Basic Zone modes, [sRGB] is set automatically. 1 Select [Color space]. Under the [z2] tab, select [Color space], then press <0>. the desired color space. 2 SetSelect [sRGB] or [Adobe RGB], then press <0>.
3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This operation is optional since a folder will be created automatically for saving captured images. Creating a Folder 1 Select [Select folder]. Under the [51] tab, select [Select folder], then press <0>. 2 Select [Create folder]. [OK]. 3 Select X A new folder with the folder number increased by one is created.
3 Creating and Selecting a Folder Selecting a Folder Lowest file number Number of images in folder Select a folder on the folder selection screen, then press <0>. X The folder where the captured images will be saved is selected. Subsequently captured images will be recorded into the selected folder. Folder name Highest file number Folders As with “100CANON” for example, the folder name starts with three digits (the folder number) followed by five alphanumeric characters.
3 File Numbering Methods The captured images are assigned a sequential four-digit file number from 0001 (Example) IMG_0001.JPG to 9999 and saved in one folder. You can File number change how the file number is assigned. 1 Select [File numbering]. Under the [51] tab, select [File numbering], then press <0>. the file numbering method. 2 SetSelect [Numbering], then press <0>. Select [Continuous] or [Auto reset], then press <0>. If you want to reset the file numbering, select [Manual reset].
3 File Numbering Methods Continuous When you wish to continue the file numbering sequence even after the card is replaced or a new folder is created. Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
3 File Numbering Methods Auto Reset When you wish to restart the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
3 Setting Copyright InformationN When you set the copyright information, it will be recorded to the image as Exif information. 1 Select [Copyright information]. Under the [55] tab, select [Copyright information], then press <0>. the item to be set. 2 Select Select [Enter author’s name] or [Enter copyright details], then press <0>. text. 3 Enter Operate the Character palette Input mode keys or turn the <6> or <5> dial to move the n and select the desired character.
3 Setting Copyright InformationN Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information. If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.].
5 GPS Settings This chapter describes the camera’s built-in GPS settings. The EOS 6D Mark II can receive satellite navigation signals from GPS satellites (USA), GLONASS satellites (Russia), and Quasi-Zenith Satellite System (QZSS) “Michibiki” (Japan). The GPS function is set to [Disable] by default. This manual uses the term “GPS” to refer to the satellite navigation function. When [GPS] is set to [Mode 1] (p.
GPS Features Geotagging Images Geotag information*1 (latitude, longitude, elevation) and coordinated universal time*2 can be appended to images. Shooting locations of geotagged images can be displayed on a map on a computer. *1: Certain traveling conditions or GPS settings may cause inaccurate geotag information to be added to images. *2: Coordinated Universal Time, abbreviated as UTC, is essentially the same as Greenwich Mean Time.
GPS Features Viewing Images and Information on a Virtual Map With Map Utility (EOS software, p.595), you can view the shooting locations and the route traveled on a map displayed on a computer.
GPS Precautions Countries and Regions Permitting GPS Function Use Use of GPS function is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating GPS function regulations, visit the Canon Web site to check where the use is allowed. Note that Canon cannot be held liable for any problems arising from GPS function use in other countries and regions.
Acquiring GPS Signals To acquire GPS signals, take the camera outside where the sky is unobstructed. Face the top of the camera toward the sky while keeping your hands, etc. away from the camera top. When the signal acquisition conditions are good, it will take the camera approx. 30 sec. to 60 sec. to acquire the GPS satellite signals after you set [GPS] to [Mode 1] or [Mode 2]. Check that [r] is displayed on the LCD panel, then shoot. 1 Select [GPS settings].
Acquiring GPS Signals GPS Acquisition Status The GPS acquisition status is indicated by the [r] icon displayed on the camera’s LCD panel. Constant r: Signal acquired Blinking r: Signal not acquired yet When you shoot while [r] is constantly displayed, the image will be geotagged. When [Mode 1] is set, the camera will continue to receive GPS signals at regular intervals even when the power switch is set to <2>. This will exhaust the battery sooner and fewer shots can be taken.
Acquiring GPS Signals Poor GPS Coverage Under the following conditions, the GPS satellite signal will not be properly acquired. As a result, the geotag information may not be recorded or inaccurate geotag information may be recorded. Indoors, underground, in tunnels or forests, between buildings, or in valleys. Near high-voltage power lines or mobile phones operating on the 1.5 GHz band. When the camera is left inside a bag, etc. When traveling a long distance.
Acquiring GPS Signals Viewing GPS Information 1 Check the [GPS] setting. Check that [GPS] is set to [Mode 1] or [Mode 2]. [GPS information display]. 2 Select X The GPS information will be displayed. the picture. 3 TakeWhen you shoot after GPS signal acquisition, the image will be geotagged. Generally, elevation is not as accurate as latitude and longitude due to the nature of GPS. The icon indicates signal conditions. When is displayed, the elevation is also recorded.
Acquiring GPS Signals Geotagging Information Play back the images and press the button to display the shooting information screen (p.392). Then tilt <9> up or down to check the geotag information. Latitude Longitude Elevation UTC (Coordinated Universal Time) When you shoot a movie, the GPS information at the time when shooting begins is recorded. Note that signal reception conditions are not recorded.
Setting the Positioning Interval The interval (time) to update the geotag information can be set. Although updating the geotag information at shorter intervals will record more accurate location information, it will reduce the number of possible shots because it will drain the battery faster. 1 Check the [GPS] setting. Check that [GPS] is set to [Mode 1] or [Mode 2]. 2 Select [Position update intvl]. the desired update interval. 3 SetSelect the option to be set, then press <0>.
Setting Time from GPS on the Camera The time information obtained from GPS signals can be set on the camera. The margin of error is approx. ±1 sec. 1 Check the [GPS] setting. Check that [GPS] is set to [Mode 1] or [Mode 2]. 2 Select [Auto time setting]. the desired setting. 3 Select Select [Auto update] or [Set now], then press <0>. [Auto update] updates the time when the camera is turned on and a GPS signal is received.
Logging the Route Traveled When using the GPS logging function, the geotag information of the route the camera travels is automatically recorded in the camera’s internal memory. With Map Utility (EOS software, p.595), you can view the shooting locations and the route traveled on a map displayed on a computer. Map data ©2017 ZENRIN 1 Check the [GPS] setting. Check that [GPS] is set to [Mode 1] or [Mode 2]. 2 Select [GPS Logger]. [Log GPS position] to 3 Set [Enable].
Logging the Route Traveled Geotag Information Logs Geotag information for the route the camera travels is recorded at the intervals set with [Position update intvl] (p.226). The log data is saved in the camera’s internal memory by date. The table below shows how many days’ worth of data can be saved. Log Data Capacity by Positioning Interval (Approx.) Update Interval Log Data Update Interval Log Data Every 1 sec. 4.1 days Every 30 sec. 100 days Every 5 sec. 20 days Every 1 min.
Logging the Route Traveled Downloading Log Data to a Computer The log data in the camera’s internal memory can be downloaded to a computer with EOS Utility (EOS software, p.594) or downloaded from a card after transferring the data to the card. When you use Map Utility (EOS software, p.595) to open a log file saved on the computer, the camera’s travel route will be displayed on a map.
Logging the Route Traveled The GPS antenna is located at the top of the camera body. For this reason, even when carrying the camera, such as in a bag, try to keep the top of the camera facing upwards, and do not place anything on top of it. Set the camera time and date as accurately as possible. Also, set correct time zone and daylight saving time for the shooting location.
6 Advanced Operations for Photographic Effects In Creative Zone modes, you can change various settings of the camera as you desire to obtain a wide variety of shooting results, by selecting the shutter speed and/or aperture, adjusting the exposure as you prefer, etc. The M icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (, , , , ).
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * stands for Program. * AE stands for Auto Exposure. 1 Set the Mode Dial to . on the subject. 2 Focus Look through the viewfinder and aim the AF point over the subject. Then press the shutter button halfway. X When focus is achieved, the focus indicator in the viewfinder will light up (in One-Shot AF mode).
d: Program AE If the “30"” shutter speed and the lowest f/number blink, it indicates underexposure. Increase the ISO speed or use flash. If the “4000” shutter speed and the highest f/number blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens. Differences Between and Modes In the mode, many functions, such as the AF operation and metering mode, are set automatically to prevent spoiled shots.
s: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure matching the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion. * stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) 1 Frozen motion (Fast shutter speed: 1/2000 sec.
s: Shutter-Priority AE If the lowest f/number blinks, it indicates underexposure. Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the highest f/number blinks, it indicates overexposure. Turn the <6> dial to set a faster shutter speed until the aperture stops blinking or set a lower ISO speed. Shutter Speed Display The shutter speeds from “4000” to “4” indicate the denominator of the fractional shutter speed.
f: Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/number (larger aperture hole) will make less of the foreground and background fall within acceptable focus.
f: Aperture-Priority AE If the “30"” shutter speed blinks, it indicates underexposure. Turn the <6> dial to set a larger aperture (lower f/ number) until the shutter speed blinking stops or set a higher ISO speed. If the “4000” shutter speed blinks, it indicates overexposure. Turn the <6> dial to set a smaller aperture (higher f/ number) until the shutter speed blinking stops or set a lower ISO speed. Aperture Value Display The higher the f/number, the smaller the aperture opening will be.
f: Aperture-Priority AE Depth-of-Field PreviewN The aperture opening (diaphragm) changes only at the moment when the picture is taken. Otherwise, the aperture remains fully open. Therefore, when you look at the scene through the viewfinder or on the LCD monitor, the depth of field will look narrow (shallow). Press the depth-of-field preview button to stop down the lens to the current aperture setting and check the depth of field (range of acceptable focus).
a: Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available exposure meter. This method is called manual exposure. * stands for Manual. Shutter speed Aperture Standard exposure index Exposure level mark 1 Set the Mode Dial to . 2 Set the ISO speed (p.170). the shutter speed and 3 Set aperture. To set the shutter speed, turn the <6> dial.
a: Manual Exposure Exposure Compensation with ISO Auto If the ISO speed is set to A (AUTO) for manual exposure shooting, you can set exposure compensation (p.245) as follows: [z2: Expo.comp./AEB] Under [8C.Fn III-4: Custom Controls], with [ : Expo comp (hold btn, turn )] (p.502). Quick Control (p.61) If ISO Auto is set, the ISO speed setting will change to obtain the standard exposure with the set shutter speed and aperture. Therefore, you may not obtain the desired exposure effect.
q Selecting the Metering ModeN You can select one of four methods to measure the subject brightness. In Basic Zone modes, evaluative metering is set automatically. (In the <8: y> mode, center-weighted average metering is set automatically.) 1 Press the button (9). the metering mode. 2 Select While looking at the LCD panel or the viewfinder, turn the <6> or <5> dial.
q Selecting the Metering ModeN r Spot metering Effective when metering a specific part of the subject or scene. Spot metering covers approx. 3.2% of the viewfinder area at the center. The spot metering circle will be displayed in the viewfinder. e Center-weighted average metering The metering is averaged for the entire scene with the viewfinder center weighted more heavily. By default, the camera will set the exposure as follows.
O Setting the Desired Exposure CompensationN Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation can be set in the , , and shooting modes. Although you can set the exposure compensation up to ±5 stops in 1/3-stop increments for viewfinder shooting, the exposure compensation indicator in the viewfinder and on the LCD panel can display the setting only up to ±3 stops.
O Setting the Desired Exposure CompensationN For Live View and movie shooting, the exposure compensation can be set only up to ±3 stops. If [z2: Auto Lighting Optimizer] (p.194) is set to any setting other than [Disable], the image may still look bright even if a decreased exposure compensation for a darker image is set. The set exposure compensation amount will not be applied to movie shooting. The exposure compensation amount will remain in effect even after you set the power switch to <2>.
h Auto Exposure Bracketing (AEB)N By changing the shutter speed, aperture, or ISO speed automatically, you can bracket the exposure up to ±3 stops in 1/3-stop increments for three consecutive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. 1 Select [Expo.comp./AEB]. Under the [z2] tab, select [Expo.comp./AEB], then press <0>. the AEB range. 2 SetTurn the <6> dial to set the AEB AEB range range. By pressing the keys, you can set the exposure compensation amount.
h Auto Exposure Bracketing (AEB)N If [z2: Auto Lighting Optimizer] (p.194) is set to any setting other than [Disable], the effect of AEB may be reduced. During AEB shooting, will blink in the viewfinder. If the drive mode is set to or , press the shutter button three times for each shot. When , , or is set and you hold down the shutter button completely, the three bracketed shots will be taken consecutively and the camera will automatically stop shooting.
A Locking the Exposure for Shooting (AE Lock)N You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the picture. This is called AE lock. It is effective for shooting backlit subjects, etc. 1 Focus on the subject. Press the shutter button halfway. X The exposure setting will be displayed. the button (0).
F: Long (Bulb) Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. This photographic technique is called “bulb exposure”. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. 1 Set the Mode Dial to . the desired aperture. 2 SetWhile looking at the LCD panel or the viewfinder, turn the <6> or <5> dial. picture.
F: Long (Bulb) Exposures With [z3: Long exp. noise reduction], you can reduce the noise generated during long exposures (p.197). For bulb exposures, using a tripod and bulb timer is recommended. You can also use mirror lockup (p.265) in combination. You can also shoot bulb exposures by using Remote Switch RS-80N3 (sold separately) or Timer Remote Controller TC-80N3 (sold separately, p.276). You can also use Remote Controller RC-6 (sold separately, p.
F: Long (Bulb) Exposures the desired exposure time. 3 SetSelect the hour, minute, or second. Press <0> so is displayed. Set the desired number, then press <0>. (Returns to .) [OK]. 4 Select X The set time will be displayed on the menu screen. X When you exit the menu, will be displayed on the LCD panel. Elapsed exposure time Bulb timer the picture. 5 Take X Press the shutter button completely, and the bulb exposure will start and continue until the set time elapses.
w: HDR (High Dynamic Range) ShootingN You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. With HDR shooting, three images of different exposures (standard exposure, underexposure, and overexposure) are captured consecutively for each shot and then merged together automatically. The HDR image is recorded as a JPEG image. * HDR stands for High Dynamic Range.
w: HDR (High Dynamic Range) ShootingN Effects P: Natural For images preserving a wide tonal range where the highlight and shadow details would otherwise be lost. Clipped highlights and shadows will be reduced. A: Art standard While the clipped highlights and shadows will be reduced more than with [Natural], the contrast will be lower, and the gradation flatter to have the picture look like a painting. The subject outlines will have bright (or dark) edges.
w: HDR (High Dynamic Range) ShootingN [Continuous HDR]. 4 SetSelect either [1 shot only] or [Every shot], then press <0>. With [1 shot only], HDR shooting will be canceled automatically after the shooting ends. With [Every shot], HDR shooting continues until the setting in step 2 is set to [Disable HDR]. Image Align]. 5 SetFor[Auto handheld shooting, select [Enable]. When using a tripod, select [Disable], then press <0>. picture.
w: HDR (High Dynamic Range) ShootingN You cannot select RAW or RAW+JPEG image quality. The HDR mode cannot be set if RAW or RAW+JPEG is set. HDR shooting is not possible with expanded ISO speeds (L, H1, H2). HDR shooting is possible within ISO 100 - ISO 40000 (varies depending on the settings of [Minimum] and [Maximum] for [ISO speed range]). The flash will not fire during HDR shooting.
w: HDR (High Dynamic Range) ShootingN When shooting HDR images with [Auto Image Align] set to [Enable], AF point display information (p.397) and Dust Delete Data (p.452) will not be appended to the image. If you perform handheld HDR shooting with [Auto Image Align] set to [Enable], image periphery will be slightly trimmed and resolution will be slightly lowered. Also, if the images cannot be aligned properly due to camera shake, etc., auto image alignment may not take effect.
P Multiple ExposuresN You can shoot two to nine exposures to be merged into one image. With Live View shooting (p.289), you can see in real time how the exposures are merged when you shoot multiple-exposure images. 1 Select [Multiple exposure]. Under the [z3] tab, select [Multiple exposure], then press <0>. [Multiple exposure]. 2 SetSelect [Enable], then press <0>. To exit shooting multiple exposures, select [Disable]. [Multi-expos ctrl].
P Multiple ExposuresN the [No. of exposures]. 4 SetSelect the number of exposures, then press <0>. You can set it from 2 to 9 exposures. [Continue Mult-exp]. 5 SetSelect either [1 shot only] or [Continuously], then press <0>. With [1 shot only], multiple-exposure shooting will be canceled automatically after the shooting ends. With [Continuously], multipleexposure shooting continues until the setting in step 2 is set to [Disable]. the first exposure. 6 Shoot X The captured image will be displayed.
P Multiple ExposuresN subsequent exposures. 7 Shoot X The captured image combining the multiple exposures will be displayed. When you perform Live View shooting, the multiple-exposure images merged so far will be displayed. By pressing the button, you can display only the Live View image. Multiple-exposure shooting will end when the set number of exposures are taken.
P Multiple ExposuresN For multiple-exposure shooting, the settings will be automatically switched to [Disable] for the following: all the items of [z1: Lens aberration correction], [z2: Auto Lighting Optimizer], and [z3: Highlight tone priority]. If [z3: Picture Style] is set to [Auto], [Standard] will be applied for shooting. With [Additive] set, the noise, irregular colors, banding, etc. of the image displayed during shooting may look different from the multiple-exposure image recorded in the end.
P Multiple ExposuresN Merging Multiple Exposures with an Image Recorded on the Card You can select a 1 image recorded on the card as the first single exposure. The image data of the selected 1 image will remain intact. You can only select 1 images. You cannot select 41/61 or JPEG images. 1 Select [Select image for multi. expo.]. X The images on the card will be displayed. 2 Select the first image. Turn the <5> dial to select the image to be used as the first single exposure, then press <0>. Select [OK].
P Multiple ExposuresN You can also select a 1 multiple-exposure image as the first single exposure. If you select [Deselect img], the image selection for the first image will be canceled. Checking and Deleting Multiple Exposures During Shooting Before you finish shooting the set number of exposures, you can press the button to check the current exposure level, overlap alignment, and overall effect of the merged multipleexposure image.
P Multiple ExposuresN FAQ Are there any restrictions on the image-recording quality? All JPEG image-recording quality settings can be selected. If 41 or 61 is set, the merged multiple-exposure image will be saved as a 1 image. Image Quality Setting Merged Multiple-Exposure JPEG JPEG 1 1 41/61 1 1+JPEG 1+JPEG 41/61+JPEG 1+JPEG Can I merge images recorded on the card? With [Select image for multi. expo.], you can select the first single exposure from the images recorded on the card (p.262).
2 Mirror LockupN Camera vibrations caused by the mirror’s reflex action when the picture is taken is called “mirror shock”. Mirror lockup keeps the mirror up before and during exposure to reduce blur caused by camera vibrations. Useful when shooting close-ups (macro photography), using a super telephoto lens, shooting at slow shutter speeds, etc. 1 Select [Mirror lockup]. Under the [z4] tab, select [Mirror lockup], then press <0>. 2 Select [Enable].
2 Mirror LockupN Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. In very bright light, such as at the beach or a ski slope on a sunny day, take the picture promptly after mirror lockup is stabilized. During mirror lockup, shooting function settings and menu operations are disabled.
H Interval Timer Shooting With the interval timer, you can set the shooting interval and the number of shots. The camera will repeat taking one shot with the set interval until the set number of shots are taken. 1 Select [Interval timer]. Under the [z4] tab (the [z1] tab in Basic Zone modes), select [Interval timer], then press <0>. [Enable]. 2 Select Select [Enable], then press the button. the shooting interval and 3 Set number of shots.
H Interval Timer Shooting Number of shots Shooting interval [OK]. 4 Select X The interval timer settings will be displayed on the menu screen. X When you exit the menu, will be displayed on the LCD panel. the picture. 5 Take X First shot is taken and shooting Interval timer continues according to the interval timer settings. During interval timer shooting, will blink. After the set number of shots are taken, the interval timer shooting will stop and be automatically canceled.
H Interval Timer Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If the lens’s focus mode switch is set to , the camera will not shoot when focus is not achieved. Setting it to and focusing manually before shooting is recommended. Live View shooting, movie shooting, or bulb exposures cannot be performed with interval timer.
Using the Eyepiece Cover When you take a picture without looking through the viewfinder, such as when you use the self-timer, bulb exposure, or a remote switch, stray light entering the viewfinder may cause the picture to look dark (underexposed). To prevent this, use the eyepiece cover (p.38) attached to the camera strap. Note that attaching the eyepiece cover is not necessary in Live View shooting or movie shooting. 1 Detach the eyecup. Push the bottom of the eyecup to detach it. the eyepiece cover.
Remote Control Shooting You can use Remote Controller RC-6 (with infrared control, sold separately) or Wireless Remote Control BR-E1 (with Bluetooth, sold separately) for remote control shooting. Remote Controller RC-6 (Sold Separately) You can shoot remotely up to approx. 5 meters/ 16.4 feet away from the camera. You can either shoot immediately or with a 2-sec. delay. 1 Focus on the subject. the lens’s focus mode switch 2 Set to . You can also shoot with . 3 Press the button (9).
Remote Control Shooting the remote controller’s 5 Press release (transmit) button. 22 m Remote control sensor Point the remote controller toward the camera’s remote control sensor, then press the release (transmit) button. X The self-timer/remote control lamp lights up and the picture is taken. If you select in step 4, you cannot perform remote control shooting.
Remote Control Shooting Wireless Remote Control BR-E1 (Sold Separately) Wireless Remote Control BR-E1 (sold separately) compatible with Bluetooth® low energy technology enables remote control shooting up to approx. 5 meters/16.4 feet from the camera. To use the BR-E1, you must first pair the camera and remote controller so they recognize each other. Pairing 1 Select [Wireless communication settings]. Under the [51] tab, select [Wireless communication settings], then press <0>.
Remote Control Shooting [Pairing]. 5 Select Select [Pairing], then press <0>. Press and hold the button and button on the BR-E1 simultaneously for 3 sec. or more. X Pairing starts. For instructions after the pairing is complete, refer to the BR-E1’s Instruction Manual. X When the pairing is complete, the remote controller will be registered in the camera and the screen shown on the left will appear.
Remote Control Shooting Canceling the Pairing To pair the camera with another Wireless Remote Control BR-E1 (sold separately), clear the paring (registration) with the current remote controller. You can check the connection status of the camera and remote controller on the [Check/clear connection info] screen in step 4. 1 Select [Wireless communication settings]. Under the [51] tab, select [Wireless communication settings], then press <0>. 2 Select [Bluetooth function].
Using a Remote Switch You can connect any EOS accessory equipped with an N3-type terminal such as the Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (each sold separately) to shoot with the camera (p.515). To operate the accessory, refer to its Instruction Manual. 1 Open the terminal cover. the plug to the remote 2 Connect control terminal. Connect the plug as shown in the illustration. To disconnect the plug, grasp the silver part and pull it out.
7 Flash Photography This chapter describes how to shoot with external EXseries Speedlites (sold separately) and how to set Speedlite settings on the camera’s menu screen.
D Flash Photography EOS-dedicated, EX-series Speedlites Using an EX-series Speedlite (sold separately) makes flash photography easy. For operation procedures, refer to the EX-series Speedlite’s Instruction Manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites. To set the flash functions and flash Custom Functions on the camera’s menu screen, see pages 281-287.
D Flash Photography If the [z2: Auto Lighting Optimizer] (p.194) setting is not [Disable], the image may still look bright even if a decreased exposure compensation is set for a darker exposure. If it is difficult to achieve focus with autofocus, the EOS-dedicated, external Speedlite will automatically emit the AF-assist beam as necessary. Canon Speedlites Other Than the EX-series With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only.
D Flash Photography Non-Canon Flash Units Sync Speed The camera can synchronize with non-Canon compact flash units at 1/180 sec. and slower speeds. With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model. Be sure to check before shooting if flash sync is properly performed by test shooting at a sync speed of approx. 1/60 sec. to 1/30 sec.
3 Setting the Flash FunctionN With an EX-series Speedlite having compatible flash function settings, you can use the camera’s menu screen to set the Speedlite’s functions and Custom Functions. Attach the Speedlite to the camera and turn on the Speedlite before setting the flash functions. For details on the Speedlite’s functions, refer to the Speedlite’s Instruction Manual. 1 Select [External Speedlite control]. Under the [z1] tab, select [External Speedlite control], then press <0>.
3 Setting the Flash FunctionN Flash Sync. Speed in Av Mode You can set the flash-sync speed for flash photography in the aperturepriority AE mode. : Auto The flash sync speed is set automatically within a range of 1/180 sec. to 30 sec. to suit the scene’s brightness. High-speed sync is also possible. : 1/180-1/60sec. auto Prevents a slow shutter speed from being set in low-light conditions. It is effective for preventing subject blur and camera shake.
3 Setting the Flash FunctionN Flash Function Settings The screen display and setting options will vary depending on the Speedlite model, current flash mode, Speedlite’s Custom Function settings, etc. For details on the Speedlite’s functions, refer to the Speedlite’s Instruction Manual.
3 Setting the Flash FunctionN Wireless functions / Flash ratio control Wireless (multiple) flash photography is possible with radio or optical transmission. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. With a macro flash (MR-14EX II, etc.) compatible with flash function settings, you can set the flash ratio between flash tubes or flash heads A and B, or use wireless flash with additional slave units.
3 Setting the Flash FunctionN Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the exposure starts. If [Second-curtain synchronization] is set, the flash will be fired right before the shutter closes. When this is combined with a slow shutter speed, you can create a trail of light such as from car headlights at night with a more natural feel.
3 Setting the Flash FunctionN When using second-curtain synchronization, set the shutter speed to 1/25 sec. or slower. If the shutter speed is 1/30 sec. or faster, first-curtain synchronization will be applied automatically even if [Second-curtain synchronization] is set. With an EX-series Speedlite not compatible with flash function settings, you can only set the following: [Flash firing], [E-TTL II meter.], and [Flash exposure compensation] under [Flash function settings].
3 Setting the Flash FunctionN Clearing Flash Function Settings / Flash C.Fn Settings 1 Select [Clear settings]. the settings to be cleared. 2 Select Select [Clear flash settings] or [Clear all Speedlite C.Fn’s], then press <0>. On the confirmation dialog, select [OK]. Then the flash settings or Custom Function settings will all be cleared. The Speedlite’s Personal Function (P.Fn) cannot be set or canceled on the camera’s [z1: External Speedlite control] screen. Set it directly on the Speedlite.
8 Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is enabled by setting the Live View shooting/ Movie shooting switch to . If you handhold the camera and shoot while viewing the LCD monitor, camera shake may cause blurred images. Using a tripod is recommended in such cases. For instructions on how to hold the camera, see page 99.
A Shooting with the LCD Monitor 1 Set the Live View shooting/Movie shooting switch to . the Live View image. 2 Display Press the <0> button. X The Live View image will appear on the LCD monitor. The Live View image will be displayed in the brightness level closely matching that of the actual image to be captured. a shooting mode. 3 Select Turn the Mode Dial to select the shooting mode. on the subject.
A Shooting with the LCD Monitor Enabling Live View Shooting Set [z4: Live View shoot.] (under the [z1] tab in Basic Zone modes) to [Enable]. Number of Possible Shots with Live View Shooting (Approx. number of shots) Temperature Room Temperature (23°C / 73°F) Low Temperatures (0°C / 32°F) Possible Shots 380 340 The figures above are based on a fully-charged Battery Pack LP-E6N and CIPA (Camera & Imaging Products Association) testing standards.
A Shooting with the LCD Monitor Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. In the <8: y> mode, Live View shooting is not possible. In the <8: q> mode, the angle of view changes slightly in Live View shooting because distortion correction is applied. In the <8: FG> modes or when [z3: HDR Mode] is set, the shooting area will become smaller.
A Shooting with the LCD Monitor Information Display Each time you press the button, the information display will change.
A Shooting with the LCD Monitor Warnings Do not hold the camera in the same position for long periods of time. Even if the camera does not feel too hot, prolonged contact with the same body part may cause skin redness or blistering due to low-temperature contact burns. Using a tripod is recommended when using the camera in very hot places or for people with circulation problems or poor skin sensation. The histogram can be displayed when [z5: Expo. simulation] is set to [Enable] (p.303).
A Shooting with the LCD Monitor Scene Icons In the shooting mode, the camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen.
A Shooting with the LCD Monitor *3: The icon of the scene selected from the detectable scenes will be displayed. *4: Displayed when all the following conditions apply: The shooting scene is dark, it is a night scene, and the camera is mounted on a tripod. *5: Displayed with any of the lenses below: EF300mm f/2.8L IS II USM EF400mm f/2.8L IS II USM EF500mm f/4L IS II USM EF600mm f/4L IS II USM Image Stabilizer lenses released in and after 2012.
A Shooting with the LCD Monitor Final Image Simulation Final image simulation is a function that shows the Live View image with the effects of the current settings for Picture Style, white balance, and other shooting functions applied. The Live View image will automatically reflect the function settings listed below. However, the displayed image may be slightly different from the resulting image.
A Shooting with the LCD Monitor B Button Display Options You can set the information to be displayed on the image for when you press the button during Live View shooting or movie shooting. Select [zbutton LV display options]. Under the [54] tab, select [zbutton LV display options], then press <0>. Live View info switch setting [Live View info switch 1 Select setting]. a number.
A Shooting with the LCD Monitor the options. 3 EditSelect what you want to be displayed and press <0> to add a checkmark [X]. For the information you do not want to be displayed, press <0> to remove the checkmark [X]. Then select [OK] to register the setting. Repeat steps 2 and 3 as necessary. Histogram display • Brightness/RGB The histogram (p.398) to be displayed when you press the button can be either the [Brightness] or [RGB] histogram.
Shooting Function Settings f/R/i/q Settings When the Live View image is displayed, if you press the , , , or button, the setting screen will appear on the LCD monitor and you can turn the <6> or <5> dial to set the respective shooting function. After pressing the button, you can turn the <6> dial to set the AF method (p.308) or press the keys to set the AF operation (p.305). With Live View shooting, the or drive mode cannot be set.
Shooting Function Settings Q Quick Control With the image displayed on the LCD monitor, you can press the button and set the following functions. In Creative Zone modes, the following can be set: AF method, AF operation, Drive mode, Metering mode, Image quality, White balance, Picture Style, and Auto Lighting Optimizer. In Basic Zone modes, you can set the functions shown in boldface and those in the table on page 127 (except background blur). 1 Press the button (7).
3 Menu Function Settings z5 With Live View shooting, menu options exclusive to Live View shooting will appear under the [z5] tab (the [z2] tab in Basic Zone modes). The settable functions on this menu screen apply only to Live View shooting. They do not work with viewfinder shooting (settings are disabled). AF method You can select [u+Tracking], [Smooth zone], or [Live 1-point AF]. See pages 308-314 for the AF method. Touch Shutter You can set Touch Shutter to [Disable] or [Enable].
3 Menu Function Settings Exposure simulationN Exposure simulation simulates and displays how the brightness (exposure) of the actual image will look. • Enable (g) The displayed image brightness will be close to the actual brightness (exposure) of the resulting image. If you set exposure compensation, the image brightness will change accordingly. • During e Normally, the image is displayed at the standard brightness to make the Live View image easy to see (E).
3 Menu Function Settings • Disable Be sure to set it to [Disable] if you use a TS-E lens (other than those listed in ) for shifting or tilting the lens or if you use an extension tube. If [Mode 1] or [Mode 2] is set, the standard exposure may not be obtained, or an irregular exposure may result. With [Mode 2] set, continuous shooting will not work even if you set the drive mode to or .
Selecting the AF OperationN You can select the AF operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1 Press the button. the AF operation. 2 Select Press the keys to select the desired AF operation, then press <0>. X : One-Shot AF K : Servo AF on the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway.
Selecting the AF OperationN One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture. When the drive mode is set to for high-speed continuous shooting, the maximum continuous shooting speed is approx. 6.5 shots/sec.
Selecting the AF OperationN Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. When focus is achieved, the AF point will turn blue. The exposure is set at the moment the picture is taken. When [z5: AF method] is set to [u+Tracking] or [Smooth zone], focusing will be continuous as long as the Area AF frame or Zone AF frame keeps tracking the subject.
Focusing with AF (AF Method) Selecting the AF Method You can set the AF method to [u+Tracking] (p.309), [Smooth zone] (p.311), or [Live 1-point AF] (p.313) to suit the shooting conditions and subject. If you want to focus manually, set the lens’s focus mode switch to , magnify the image, and focus manually (p.321). Select the AF method. Under the [z5] tab, select [AF method]. (For movie shooting, it is under the [z4] tab. In Basic Zone modes, under the [z2] tab.
Focusing with AF (AF Method) u(face)+Tracking: c The camera detects and focuses on human faces. If a face moves, the AF point
also moves to track the face. 1 Display the Live View image. Press the <0> button. X The Live View image will appear on the LCD monitor. X The Area AF frame will appear. the AF point. 2 Check When a face is detected,
will Area AF frame appear over the face to be focused on. If multiple faces are detected, will be displayed.
Focusing with AF (AF Method) the picture. 4 TakeCheck the focus and exposure, then press the shutter button completely to take the picture (p.290). Focusing on a subject other than a human face • Tap on the subject (or spot) where you want to focus. • Press the <0> or button and the AF point < > will appear on the screen, and the AF point can be moved with <9>.
Focusing with AF (AF Method) Smooth Zone: o Focus can be achieved with a larger area (Zone AF frame) than the AF point of [Live 1-point AF] (p.313). 1 Display the Live View image. Press the <0> button. X The Live View image will appear on the LCD monitor. X The Zone AF frame will appear. Zone AF frame the AF point. 2 Select Use <9> to move the Zone AF frame to where you want to focus. (It cannot go to the edge of the screen.
Focusing with AF (AF Method) the picture. 4 TakeCheck the focus and exposure, then press the shutter button completely to take the picture (p.290). If the camera does not focus on the target subject, switch to [Live 1-point AF] (p.313) and focus again.
Focusing with AF (AF Method) Live 1-point AF: d The camera focuses with a single AF point. This is effective when you want to focus on a particular subject. the Live View image. 1 Display Press the <0> button. X The Live View image will appear on the LCD monitor. X The AF point < > will appear. AF point the AF point. 2 Move Use <9> to move the AF point to where you want to focus. (It cannot go to the edge of the screen.) Pressing <0> or the button will return the AF point to the screen center.
Focusing with AF (AF Method) the picture. 4 TakeCheck the focus and exposure, then press the shutter button completely to take the picture (p.290). During movie shooting, if [z4: Movie Servo AF] is set to [Enable], the AF point will be displayed larger in step 1.
Focusing with AF (AF Method) Notes for AF AF Operation Even when focus is achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes while the Live View image is displayed, the screen may flicker and focusing may be difficult.
Focusing with AF (AF Method) Shooting Conditions that Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under a light source whose brightness, color, or pattern keeps changing.
Focusing with AF (AF Method) Magnified View When the AF method is [Smooth zone] or [Live 1-point AF] mode, either press the button or tap on [d] displayed on the bottom right of the screen. You can magnify the image by approx. 5x or 10x and check the focus. Magnified view is not possible with [u+Tracking]. To move the AF point or Zone AF frame, use <9> or tap on the spot you want to magnify. Press the button or tap on [d] to magnify the image.
Focusing with AF (AF Method) If focusing is difficult in the magnified view, return to the normal view and perform AF. If you perform AF in the normal view and then use the magnified view, accurate focus may not be achieved. AF speed differs between normal view and magnified view. When in magnified view, Movie Servo AF (p.373) will not function. With the magnified view, achieving focus becomes more difficult due to camera shake. Using a tripod is recommended.
x Shooting with the Touch Shutter Just by tapping on the LCD monitor screen, you can focus and take the picture automatically. 1 Display the Live View image. Press the <0> button. X The Live View image will appear on the LCD monitor. the Touch Shutter. 2 Enable Tap [y] on the screen’s bottom left. Each time you tap on the icon, it will toggle between [y] and [x]. [x] (Touch Shutter: Enable) The camera will focus on the spot you tap on, then the picture will be taken.
x Shooting with the Touch Shutter Even if you set the drive mode to or , the camera will still shoot in the single shooting mode. Even if [AF operation] is set to [Servo AF], tapping on the screen will focus on the image with [One-Shot AF]. Tapping on the screen in magnified view will not focus or take the picture. If you shoot by tapping on the screen with [z1: Image review] set to [Hold], you can press the shutter button halfway to take the next shot. If you use [8C.
MF: Focusing Manually You can magnify the image and focus precisely with MF (manual focus). 1 Set the lens’s focus mode switch to . Turn the lens focusing ring to focus roughly. 22 22 the magnifying frame. 2 Display Press the button or tap on [d] on the lower right of the screen. X The magnifying frame will appear. Magnifying frame the magnifying frame. 3 Move Either operate <9> or tap on the spot you want to magnify to move the magnifying frame to where you want to focus.
MF: Focusing Manually manually. 5 Focus While looking at the magnified image, turn the lens focusing ring to focus. After achieving focus, press the button to return to the normal view. the picture. 6 TakeCheck the exposure, then press the shutter button completely to take the picture (p.290). In magnified view, the exposure is locked. (Shutter speed and aperture will be displayed in red.) Even with manual focusing, you can use the Touch Shutter to take a picture.
General Live View Shooting Cautions Image Quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image. If Live View shooting is used continuously for a prolonged period, the camera’s internal temperature may rise, and image quality may deteriorate. Always exit Live View shooting when you are not shooting.
General Live View Shooting Cautions Live View Image Under low- or bright-light conditions, the Live View image may not reflect the brightness of the captured image. Even if a low ISO speed is set, noise may be noticeable in the displayed Live View image under low light. However, when you shoot, the image recorded will have less noise. (The image quality of the Live View image is different from that of the recorded image.) If the light source (illumination) within the image changes, the screen may flicker.
9 Shooting Movies Movie shooting is enabled by setting the Live View shooting/ Movie shooting switch to . Before shooting movies, see page 343 and make sure the card is able to record movies at the desired movierecording quality setting. If you handhold the camera and shoot movies, camera shake can cause blurred movies. Using a tripod is recommended in such cases. For instructions on how to hold the camera, see page 99.
k Shooting Movies / Autoexposure Shooting When the shooting mode is set to , , , , , or , autoexposure control will take effect to suit the scene’s current brightness. 1 Set the Live View shooting/Movie shooting switch to . X The Live View image will appear on the LCD monitor. Set the Mode Dial to , , 2 , , , or . on the subject. 3 Focus Before shooting a movie, focus with AF or manual focus (p.308, 321).
k Shooting Movies ISO Speed in the and Modes The ISO speed will be set automatically within ISO 100 - ISO 25600. ISO Speed in the , , , and Modes The ISO speed will be set automatically within ISO 100 - ISO 25600. Under [z2: k ISO speed settings], if you set [ISO Auto] to [Max.:H2 (102400)] (p.372), the maximum limit of the automatic ISO speed setting range will be expanded to H2 (equivalent to ISO 102400). If you select [Max.:6400] or [Max.
k Shooting Movies Cautions for the , , , , , and Modes In the and modes, the scene icon for the scene detected by the camera is displayed on the upper left of the screen (p.329). You can lock the exposure (AE lock) by pressing the button (except in the , and <8> modes, p.249). After applying AE lock during movie shooting, you can cancel it by pressing the button. (AE lock setting is retained until you press the button.
k Shooting Movies Scene Icons In the and modes, the camera detects the scene type and sets the exposure automatically to suit the scene. The detected scene type is indicated on the upper left of the screen. Subject Portrait*1 Background Non-Portrait Nature and Outdoor Scene Close*2 Background Color Bright Gray Backlit Blue Sky Included Light blue Backlit Sunset *3 *3 Orange Spotlight Dark blue Dark *1: Displayed only when the AF method is set to [u+Tracking].
k Shooting Movies Manual Exposure Shooting You can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. the Live View shooting/Movie 1 Set shooting switch to . 2 Set the Mode Dial to . the ISO speed. 3 SetPress the button. X The ISO speed setting screen will appear on the LCD monitor. Turn the <6> or <5> dial to set it. For details on the ISO speed, see the next page. the shutter speed and 4 Set aperture.
k Shooting Movies ISO Speed in the Mode With [AUTO] (A), the ISO speed will be set automatically within ISO 100 - ISO 25600. Under [z2:k ISO speed settings], if you set [ISO Auto] to [Max.:H2 (102400)] (p.372), the maximum limit of the automatic ISO speed setting range will be expanded to H2 (equivalent to ISO 102400). If you select [Max.:6400] or [Max.:12800], you can narrow the automatic ISO speed setting range (maximum limit is lowered).
k Shooting Movies For movie shooting, the ISO speed cannot be expanded to L (equivalent to ISO 50). When switching from still photo shooting to movie shooting, check the camera settings again before shooting movies. During movie shooting, avoid changing the shutter speed or aperture. Doing so may record the changes in the exposure or create more noise at high ISO speeds. When shooting a movie of a moving subject, a shutter speed of approx. 1/25 sec. to 1/125 sec. is recommended.
k Shooting Movies Settable Shutter Speeds The settable shutter speeds in the manual exposure shooting mode vary depending on the frame rate of the movie recording quality. (sec.) Frame Rate Shutter Speed 8 1/4000 - 1/60 7 1/4000 - 1/50 6 1/4000 - 1/30 54 1/4000 - 1/25 The settable shutter speeds will differ for time-lapse movie shooting (p.349). Still Photo Shooting Still photos cannot be taken during movie shooting.
k Shooting Movies Information Display Each time you press the button, the information display will change.
k Shooting Movies When the [z4: AF method] is [Smooth zone] or [Live 1-point AF], you can press the button to display the electronic level (p.80). You can set what is displayed for when you press the button (p.298). If [z4: AF method] is set to [u+Tracking] or if the camera is connected to a TV set with an HDMI cable, the electronic level cannot be displayed. The electronic level, grid lines, or histogram cannot be displayed during movie shooting.
k Shooting Movies Cautions for Movie Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If you shoot something that has fine detail, moire or false colors may result. If or is set and the ISO speed or aperture changes during movie shooting, the white balance may also change.
k Shooting Movies Warnings Do not hold the camera in the same position for long periods of time. Even if the camera does not feel too hot, prolonged contact with the same body part may cause skin redness or blistering due to low-temperature contact burns. Using a tripod is recommended when using the camera in very hot places or for people with circulation problems or poor skin sensation. Notes for Movie Shooting Each time you shoot a movie, a new movie file is created on the card.
k Shooting Movies Final Image Simulation Final image simulation is a function that shows the movie as it will look with the current settings for the Picture Style, white balance and other shooting functions applied. During movie shooting, the image will automatically reflect the function settings listed below. However, the displayed image may be slightly different from the resulting image.
Shooting Function Settings f/i Settings With the image displayed on the LCD monitor, if you press the or button, the setting screen will appear on the LCD monitor and you can turn the <6> dial to set the respective function. During manual-exposure shooting (p.330), you can press the button to set the ISO speed. You cannot set the AF operation, drive mode, or metering mode. Q Quick Control With the image displayed on the LCD monitor, you can press the button to set the following functions.
Shooting Function Settings 2 Select a function and set it. Press the keys to select a function. X The settings of the selected function and Feature guide will appear on the screen. Turn the <6> or <5> dial to set it. To set the white balance correction or Picture Style parameters, press the button. To set Auto white balance, select [Q] (or [Qw]), then press <0>. To return to movie shooting, press <0> or the button. You can also select [2] to return to movie shooting.
3 Setting the Movie Recording Quality With [z1: Movie rec. size], you can set the movie recording quality (image size, frame rate, and compression method). The movie will be recorded as an MP4 file. The frame rate displayed on the [z1: Movie rec. size] screen switches automatically depending on the [53: Video system] setting (p.541). The card’s writing and reading speeds required for recording movies vary depending on the movie recording quality.
3 Setting the Movie Recording Quality Frame rate (fps: frame per second) 8 59.94fps/6 29.97fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). 7 50.00 fps/5 25.00 fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.). 4 23.98 fps Selectable when [53: Video system] is set to [For NTSC]. Mainly for motion pictures. Compression method X IPB (Standard) Compresses multiple frames at a time efficiently for recording.
3 Setting the Movie Recording Quality Cards that Can Record Movies When shooting movies, use a large-capacity card with a writing/reading speed (required card performance) shown in the table below or higher than the standard specification. Test the card by taking a few movies in the desired quality (p.341) and make sure the card can properly record the movie.
3 Setting the Movie Recording Quality To obtain better performance with the card, formatting the card with the camera before shooting movies is recommended (p.75). To check the card’s writing/reading speed, refer to the card manufacturer’s Web site, etc. For bit rates, see page 574. Total Movie Recording Time and File Size Per Minute Normal movie Movie Recording Quality (Approx.) Total Possible Recording Time on Card 8 GB File Size 32 GB 128 GB 17 min. 70 min. 283 min. 431 MB/min. 35 min.
3 Setting the Movie Recording Quality Movie Files Exceeding 4 GB Even if you shoot a movie exceeding 4 GB, you can keep shooting without interruption (except the time-lapse movie shooting). Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you shoot a movie and the file size exceeds 4 GB, a new movie file will be created automatically.
3 Setting the Sound Recording You can shoot movies while recording sound with the built-in stereo microphones or an external stereo microphone. You can also freely adjust the sound-recording level. Use [z1: Sound recording] to set sound recording functions. Sound Recording/Sound-Recording Level Auto Manual Disable : The sound-recording level is adjusted automatically. Auto level control will take effect automatically in response to the sound level. : For advanced users.
3 Setting the Sound Recording Attenuator Automatically suppresses sound distortion caused by loud noises. Even if [Sound rec.] is set to [Auto] or [Manual] for shooting, sound distortion may still result if there is a very loud sound. In such a case, setting it to [Enable] is recommended. Using a microphone Normally, the built-in microphones will record the sound in stereo. If an external stereo microphone equipped with a miniature stereo plug (3.
Shooting HDR Movies If you set the Mode Dial to <8>, you can shoot movies with clipped highlights reduced for a high dynamic range of tones even in highcontrast scenes. HDR movie will be recorded in L6X (NTSC) or L5X (PAL). * HDR stands for High Dynamic Range. 1 Set the Mode Dial to <8>. an HDR movie. 2 Shoot Shoot the movie in the same way as normal movie shooting. Since multiple frames are merged to create an HDR movie, certain parts of the movie may look distorted.
a Shooting Time-lapse Movies Still photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, celestial motion, etc.
a Shooting Time-lapse Movies the desired movie 5 Select recording size. Select [EnableH (3840x2160)] or [EnableL (1920x1080)]. EnableH (3840x2160) The movie is recorded in 4K quality. The aspect ratio is 16:9. The frame rate of the recorded movie is 29.97fps (6) for NTSC and 25.00fps (5) for PAL, and its recording format is Motion JPEG (J) and its movie file format is MOV (D). EnableL (1920x1080) The movie is recorded in Full High-Definition (Full HD) quality. The aspect ratio is 16:9.
a Shooting Time-lapse Movies the shooting interval. 6 SetSelect [Interval]. Time required Playback time Check the [k Time required] and [3: Playback time] displayed at the bottom of the screen to set the number. Select the hour, minute, or second. Press <0> to display . Set the desired number, then press <0>. (Returns to .) Settable in the range from [00:00:01] to [99:59:59]. Select [OK] to set the shooting interval. the number of shots. 7 SetSelect [No. of shots].
a Shooting Time-lapse Movies the exposure’s setting 8 Select method. Select [Auto exposure]. Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots. Each frame Metering is also performed for each subsequent shot to set the exposure automatically to match the brightness.
a Shooting Time-lapse Movies the beeper. 10 SetSelect [Beep as img taken]. If [Disable] is set, the beeper will not sound for shooting. 11 Check the settings. Time required Playback time Time required Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed.
a Shooting Time-lapse Movies the message. 13 Read Read the message and select [OK]. shots. 14 TakeAs test with Live View shooting, set the exposure and shooting functions, then press the shutter button halfway to focus. Press the shutter button completely to take test shots. The still photos will be recorded to the card. If there are no problems with the test shots, go to the next step. To take test shots again, repeat this step. The test shots are recorded with the [z1: Movie rec. size] setting.
a Shooting Time-lapse Movies the <0> button. 15 Press X The camera will be ready to start shooting a time-lapse movie. To return to step 13, press the <0> button again. Number of shots Time required Interval Shots remaining Time-lapse movie the time-lapse movie. 16 Shoot Press the button and check again the “Time required” and “Interval” displayed on the screen. Press the shutter button halfway to check the focus and exposure.
a Shooting Time-lapse Movies Using a tripod is recommended. Taking test shots for still photos as in step 14 and shooting test movies for time-lapse movies beforehand is recommended. Regardless of the [z1: Movie rec. size] setting, 4K time-lapse movies are recorded in H6J(NTSC)/H5J(PAL), while Full HD time-lapse movies are recorded in L 6 W(NTSC)/L 5 W(PAL). The movie’s field of view coverage for shooting 4K and Full HD movies is approx. 100%.
a Shooting Time-lapse Movies Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If the camera is connected to a computer with the interface cable (sold separately), or if an HDMI cable is connected to the camera, you cannot select [Enable]. Movie Servo AF will not function. If the shutter speed is 1/30 sec.
a Shooting Time-lapse Movies If a shutter speed longer than the shooting interval such as when the long exposure is set, or if a slow shutter speed is set automatically, the camera may not be able to shoot at the set interval. Also, shooting may not be performed when the shutter speed and the shooting interval are nearly the same. If the next scheduled shot is not possible, it will be skipped. This may shorten the recording time of the created time-lapse movie.
a Shooting Time-lapse Movies When time-lapse movie shooting ends, the settings are cleared automatically, and the camera returns to normal movie shooting. Note that if you set a slow shutter speed for time-lapse movie shooting and the settings are automatically cleared, the shutter speed may be automatically changed to a speed within the settable range for normal movie shooting. If you start time-lapse movie shooting while the white temperature warning (p.
a Shooting Time-lapse Movies You can use Remote Controller RC-6 (sold separately, p.271) or Wireless Remote Control BR-E1 (sold separately, p.273) to start and stop the timelapse movie shooting. Set [z5: Remote control] to [Disable] beforehand. With Remote Controller RC-6 Camera Status/ Remote Control Setting Test-shooting screen Shooting-ready During time-lapse movie shooting <2> (2-sec.
3 Shooting Video Snapshots You can shoot a series of short movie clips lasting approx. 2 sec., 4 sec., or 8 sec. called video snapshots. The video snapshots can be joined together into a single movie called a video snapshot album. You can thereby show short and quick highlights of a trip or event. A video snapshot album can also be played back together with background music (p.368, 426).
3 Shooting Video Snapshots 4 Select [Album settings]. 5 Select [Create a new album]. 6 Select [Snapshot length]. the snapshot length. 7 SetSelect the desired snapshot length, then press <0>. Select [OK]. the menu. 8 ExitPress the button to exit the Shooting duration 362 menu. X A blue bar will appear to indicate the snapshot length. Go to “Creating a Video Snapshot Album” (p.363).
3 Shooting Video Snapshots Creating a Video Snapshot Album the first video snapshot. 9 Shoot Press the <0> button, then shoot. X The blue bar indicating the shooting duration will gradually decrease. After the set shooting duration elapses, the shooting stops automatically. X The confirmation screen will appear (p.364-365). as a video snapshot album. 10 Save Select [J Save as album], then press <0>. X The movie clip will be saved as the video snapshot album’s first video snapshot.
3 Shooting Video Snapshots Options in Steps 10 and 11 Function Description JSave as album (Step 10) The movie clip will be saved as the video snapshot album’s first video snapshot. JAdd to album (Step 11) The video snapshot just recorded will be added to the album recorded immediately before. WSave as a new album (Step 11) A new video snapshot album is created and the movie clip is saved as the first video snapshot. The new album will be a different file from the previously recorded album.
3 Shooting Video Snapshots [1 Playback video snapshot] Operations in Steps 10 and 11 Function Playback Description 7 Play By pressing <0>, you can play back or pause the video snapshot recorded immediately before. 5 First frame Displays the first scene of the album’s first video snapshot. T Skip backward* Each time you press <0>, the video snapshot skips back by a few seconds. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie.
3 Shooting Video Snapshots Adding to an Existing Album 1 Select [Add to existing album]. Follow step 5 on page 362 to select [Add to existing album], then press <0>. an existing album. 2 Select Turn the <5> dial to select an existing album, then press <0>. Select [OK], then press <0>. X Certain video snapshot settings will change to match the existing album’s settings. the menu. 3 ExitPress the button to exit the menu. X The video snapshot shooting screen will appear. the video snapshot.
3 Shooting Video Snapshots Cautions for Shooting Video Snapshots You can add to an album only the video snapshots with the same duration (approx. 2 sec., 4 sec., or 8 sec. each). Note that if you do any of the following while shooting video snapshots, a new album will be created for subsequent video snapshots. • Changing the [z1: Movie rec. size] setting. • Changing the [Sound rec.] setting from [Auto] or [Manual] to [Disable] or from [Disable] to [Auto] or [Manual]. • Updating the firmware.
3 Shooting Video Snapshots Playing Back an Album You can play back a video snapshot album in the same way as a normal movie (p.419). 1 Play back the movie. Press the button to display an image. the album. 2 Select In the single-image display, the [st] icon displayed on the upper left of the screen indicates a video snapshot album. Turn the <5> dial to select an album. back the album. 3 PlayPress <0>. On the movie playback panel displayed, select [7] (Play), then press <0>.
3 Shooting Video Snapshots Editing an Album After shooting, you can rearrange, delete, or play back the video snapshots in the album. 1 Select [X]. On the movie playback panel displayed, select [X] (Edit), then press <0>. X The editing screen will be displayed. an editing operation. 2 Select Select an editing option, then press <0>. Function Description T Move snapshot Press the keys to select the video snapshot you want to move, then press <0>.
3 Shooting Video Snapshots the edited album. 3 Save Press the button to return to the Editing panel at the screen bottom. Select [W] (Save), then press <0>. X The save screen will appear. To save it as a new album, select [New file]. To save it and overwrite the original album, select [Overwrite], then press <0>. If the card does not have enough free space, [New file] will not be available. When the battery level is low, editing albums is not possible. Use a fullycharged battery.
3 Menu Function Settings z1 When the Live View shooting/Movie shooting switch is set to , some menu options under the [z1] tab will be switched to movie shooting items. Movie recording size You can set the movie recording quality (image size, frame rate, and compression method). For details, see pages 341-342. Sound recording You can set sound recording functions. For details, see page 346.
3 Menu Function Settings kISO speed settingsN ISO speed In the mode, you can set the ISO speed manually. You can also select ISO Auto. You can also use the button for these settings. ISO speed range For movie shooting, you can set the manual ISO speed setting range (minimum and maximum limits). By default, it is set to ISO 100 - ISO 25600. You can set the minimum limit within ISO 100 to H1 (equivalent to ISO 51200), and the maximum limit within ISO 200 to H2 (equivalent to ISO 102400).
3 Menu Function Settings z4 When the Live View shooting/Movie shooting switch is set to , the [z4] tab will be displayed as the menu options exclusive to movie shooting. (In Basic Zone modes, it will be the [z2] tab.) Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie shooting. The default setting is [Enable]. When [Enable] is set: The camera focuses on the subject continuously even when you are not pressing the shutter button halfway.
3 Menu Function Settings When [Disable] is set: Press the shutter button halfway or press the
button to focus. Cautions When [Movie Servo AF] is Set to [Enable] Shooting Conditions that Make Focusing Difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • When shooting with a higher f/number. • Also see “Shooting Conditions that Make Focusing Difficult” on page 316.
3 Menu Function Settings Movie Servo AF tracking sensitivityN You can change the Movie Servo AF’s tracking sensitivity to one of seven levels. This affects the responsiveness of AF tracking sensitivity when the subject strays from the AF points, such as during panning or when an obstacle cuts across the AF points. This function is settable when [z4: Movie Servo AF] is set to [Enable] and [z4: AF method] is set to [Live 1-point AF].
3 Menu Function Settings Movie Servo AF SpeedN You can set the Movie Servo AF’s AF speed and its operation conditions. This function is settable when [z4: Movie Servo AF] is set to [Enable] and [z4: AF method] is set to [Live 1-point AF]. Additionally, the function is enabled when using a lens supporting slow focus transition during movie shooting*.
3 Menu Function Settings Metering timerN You can change how long the exposure setting is displayed (AE lock time). Grid display With [3x3 l] or [6x4 m], you can display grid lines to help you level the camera vertically or horizontally. Also, with [3x3+diag n], the grid is displayed together with diagonal lines to help you compose with better balance by aligning the intersections over the subject. Note that the grid is not displayed on the LCD monitor during movie shooting.
3 Menu Function Settings V button function You can set the functions performed by pressing the shutter button halfway or completely during movie shooting.
3 Menu Function Settings z5 When the Live View shooting/Movie shooting switch is set to , the [z5] tab will be displayed as the menu options exclusive to movie shooting. (In Basic Zone modes, it will be the [z3] tab.) Video snapshot You can shoot video snapshots. For details, see page 361. Time-lapse movie You can shoot time-lapse movies. For details, see page 349.
3 Menu Function Settings Movie digital IS In-camera image stabilization electronically corrects camera shake during movie shooting. This function is called “Movie digital IS”. With Movie digital IS, images can be stabilized even when using a lens without Image Stabilizer. When using a lens with built-in optical Image Stabilizer, Movie digital IS will function when the lens’s Image Stabilizer switch is set to <1>. Disable (v) : Image stabilization with Movie digital IS is disabled.
3 Menu Function Settings Remote control shooting When [Enable] is set, you can start or stop movie shooting using Remote Controller RC-6 (sold separately, p.271) or Wireless Remote Control BR-E1 (sold separately, p.273). • When using Remote Controller RC-6 Set the switch to the <2> position, then press the transmit button. If the switch is set to (immediate release), the [z4:V btn function] setting will take effect.
3 Menu Function Settings General Movie Shooting Cautions Red Internal Temperature Warning Icon If the camera’s internal temperature increases due to prolonged movie shooting or under a high ambient temperature, a red icon will appear. The red icon indicates that movie shooting will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera’s internal temperature decreases. Turn off the power and let the camera rest for a while.
3 Menu Function Settings General Movie Shooting Cautions Recording and Image Quality If you use a card with a slow writing speed, a fivelevel indicator may appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the indicator will Indicator climb upward. If the indicator becomes full, movie shooting will stop automatically.
10 Image Playback This chapter describes how to play back and erase the captured images (still photos/movies), how to view them on a TV screen, and other playback-related functions. Images shot and saved with another device The camera may not be able to properly display images captured with a different camera, edited with a computer, or that have had their file names changed.
x Image Playback Single-Image Display 1 Play back the image. Press the button. X The last image captured or played back will appear. an image. 2 Select To play back images starting with the last image captured, turn the <5> dial counterclockwise. To play back images starting with the first captured image, turn the dial clockwise. Each time you press the button, the display will change.
x Image Playback the image playback. 3 ExitPress the button to exit the image playback and return to shooting-ready state. When RAW images shot with [z4: Aspect ratio] set to an option other than [3:2] (p.168) are played back, frame lines indicating the image area will be displayed. If the search conditions are set with [32: Set image search conditions] (p.402), only the found images will be displayed. Shooting Information Display With the shooting information screen displayed (p.
x Image Playback 3 Grid Display In the single-image display, you can overlay the grid on the image playback. With [33: Playback grid], you can select [3x3 l], [6x4 m], or [3x3+diag n]. This function is convenient for checking the image’s vertical or horizontal tilt as well as composition. The grid is not displayed during movie playback.
B: Shooting Information Display Sample Information for Still Photos Basic information display Bluetooth function Wi-Fi function Wi-Fi signal strength/ Eye-Fi transmission status Eye-Fi transfer completed Rating Protect images Battery level Playback No.
B: Shooting Information Display Shooting information display • Detailed Information for Creative Zone Mode Images Aperture Exposure compensation amount Histogram (Brightness/RGB) Shooting date and time ISO speed Shutter speed Shooting mode/ Multiple exposure/ Time-lapse movie: Test shots White balance Auto Lighting Optimizer White balance correction Picture Style/Settings AF Microadjustment Highlight tone priority Scroll bar Metering mode File size Flash exposure compensation/ Bounce/HDR shooting/ Mult
B: Shooting Information Display • Detailed Information for Basic Zone Mode Images Ambience Background blur Level of the ambience effect Level of blurred motion effect Brightness Color tone * [Brightness] indicator is displayed for images whose brightness was adjusted for shooting.
B: Shooting Information Display • Lens / Histogram information Histogram (Brightness) Lens name Histogram (RGB) Focal length • White balance information • Picture Style information 1 394 • Picture Style information 2
B: Shooting Information Display • Color space / Noise reduction information • Lens aberration correction information • GPS information Latitude Longitude Elevation UTC (Coordinated Universal Time) The GPS information screen is not displayed when GPS information is not recorded to the images. Even if you use the camera to play back an image taken by another camera (with GPS information recorded), the GPS information will not be displayed.
B: Shooting Information Display Sample Movie Information Display Move playback/Video snapshot playback Aperture Shutter speed ISO speed Movie shooting mode/ HDR movie (in 8 modes)/ Time-lapse movie/ Video snapshot HDR movie/ Movie digital IS File size Movie recording format Movie recording size Frame rate Recording time Compression rate/ Movie recording method • : Shutter speed, aperture, and ISO speed are not displayed. • < > + ISO Auto: ISO speed is not displayed.
B: Shooting Information Display Highlight alert When [33: Highlight alert] is set to [Enable], overexposed, clipped highlights will blink. To obtain more detailed gradation in the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again for a better result. AF point display When [33: AF point disp.] is set to [Enable], the AF point that achieved focus will be displayed in red.
B: Shooting Information Display Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. The display can be switched with [33: Histogram disp]. [Brightness] display Sample Histograms This histogram is a graph showing the distribution of the image’s brightness level.
H Index display (Multiple-image Display) Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen. 1 Press the button. During image playback or when the camera is ready to shoot, press the button. X [6u] will be displayed on the lower right of the screen. to the index display. 2 Switch Turn the <6> dial counterclockwise. X The 4-image index display will appear. The selected image is highlighted with an orange frame.
e Jump Display (Jumping Through Images) In the single-image display, you can turn the <6> dial to jump through the images forward or backward according to the jump method set. 1 Select [Image jump w/6]. Under the [32] tab, select [Image jump w/6], then press <0>. the jump method. 2 Select Select the jump method, then press <0>.
e Jump Display (Jumping Through Images) by jumping. 3 Browse Press the button to play back images. In the single-image display, turn the <6> dial. X You can browse by the set method. Jump method Playback position To search images by shooting date, select [g: Date]. To search images by folder, select [h: Folder]. If the card contains both movies and still photos, select [i: Movies] or [j: Stills] to display one or the other.
t Filtering Images for Playback You can play back images filtered according to search conditions. After setting the image search conditions, you can play back and display only the found images. Note that the following can be done for the found images: Erase protection, rating, slide show, deletion, print order, and photobook order. This feature enables you to quickly do a specific task to the found images in one batch. 1 Select [Set image search conditions].
t Filtering Images for Playback the search conditions. 3 Implement Read the message that appears. Select [OK], then press <0>. X The search condition is specified. the found images. 4 Display Press the <3> button to play back Yellow frame images. X Only the images that match the set conditions (filtered) will be played back. X When the images are filtered, the screen will have an outer yellow frame.
u Magnifying Images You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. 1 Magnified area position Magnify the image. The image can be magnified as follows: 1. During image playback, 2. During the image review after image capture, and 3. From the shootingready state. Press the button. X The magnified view will appear. The magnified area position and [6u] will be displayed on the lower right of the screen. The image magnification increases as you turn the <6> dial clockwise.
u Magnifying Images 3 Setting the Initial Magnification Ratio and Position Under the [33] tab, when you select [Magnificatn (apx)], you can set the initial magnification ratio and position for the magnified view. 1x (no magnification) The image is not magnified. The magnified view will start with the single-image display. 2x, 4x, 8x, 10x (magnify from center) The magnified view starts at the image center at the selected magnification.
d Playing Back with the Touch Screen The LCD monitor is a touch-sensitive panel that you can touch with your fingers for various playback operations. First, press the button to play back images. Browsing Images Swipe with one finger. With single-image display, touch the LCD monitor with one finger. You can browse to the next or previous image by swiping your finger to the left or right. Swipe to the left to see the next (newer) image, or swipe to the right to see the previous (older) image.
d Playing Back with the Touch Screen Reducing Image (Index Display) Pinch two fingers. Touch the screen with two fingers spread apart, and pinch your fingers together on the screen. Each time you pinch your fingers, the image will shrink. If you pinch the single-image display, it will change to the 4-image index display. When you select an image, the orange frame will appear. Tap on the image again to display it as a single image. Magnifying Image Spread two fingers apart.
b Rotating the Image You can rotate the displayed image to the desired orientation. 1 Select [Rotate image]. Under the [31] tab, select [Rotate image], then press <0>. an image. 2 Select Turn the <5> dial to select the image to be rotated. You can also select an image in the index display (p.399). the image. 3 Rotate Each time you press <0>, the image will rotate clockwise as follows: 90° 9 270° 9 0°. To rotate another image, repeat steps 2 and 3. If you set [51: Auto rotate] to [OnzD] (p.
K Protecting Images You can protect important images from being accidentally erased by the camera’s erase function. 3 Protecting a Single Image 1 Select [Protect images]. Under the [31] tab, select [Protect images], then press <0>. [Select images]. 2 Select X An image will be displayed. Image protection icon the image to be protected. 3 Select Turn the <5> dial to select the image to be protected. the image. 4 Protect Press <0> to protect the selected image.
K Protecting Images 3 Specifying the Range of Images to be Protected While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. 1 Select [Select range]. Under [31: Protect images], select [Select range] and press <0>. the range of images. 2 Specify Select the first image (start point), then press <0>. Next, select the last image (end point), then press <0>.
K Protecting Images 3 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [31: Protect images], all the images in the folder or on the card will be protected. To cancel the selection, select [Unprotect all images in folder] or [Unprotect all images on card]. If the search conditions are set with [32: Set image search conditions] (p.
p Setting Ratings You can rate images (still photos and movies) with one of the five rating marks: l/m/n/o/p. This function is called rating. 3 Rating a Single Image 1 Select [Rating]. Under the [32] tab, select [Rating], then press <0>. [Select images]. 2 Select X An image will be displayed. the image to be rated. 3 Select Turn the <5> dial to select the image to be rated. If you press the button and turn the <6> dial counterclockwise, you can select an image from a threeimage display.
p Setting Ratings 3 Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. 1 Select [Select range]. Select [Select range] in [32: Rating], then press <0>. the range. 2 Specify Select the first image (start point), then press <0>. Next, select the last image (end point), then press <0>.
p Setting Ratings 3 Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [32: Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated. Turn the <6> dial to select a rating, then select [OK]. When you are not rating images or cancelling the rating, select [OFF]. If the search conditions are set with [32: Set image search conditions] (p.
Q Quick Control for Playback During playback, you can press the button to set the following: [J: Protect images], [b: Rotate image], [9: Rating], [R: RAW image processing (1 images only)], [S: Resize (JPEG image only)], [N: Cropping (JPEG images only)], [ : Highlight alert], [ : AF point display], [e: Image jump w/6], [t: Image search], and [q: Send images to smartphone*]. For movies, only the functions in bold above can be set.
Q Quick Control for Playback the setting. 3 ExitPress the button to exit the Quick Control. To rotate an image, set [51: Auto rotate] to [OnzD] (p.435). If [51: Auto rotate] is set to [OnD] or [Off], the [b Rotate image] setting will be recorded to the image, but the camera will not rotate the image for display. Pressing the button during the index display will switch to the single-image display, and the Quick Control screen will appear.
k Enjoying Movies The three main ways to play back and enjoy movies are as follows: Playback on a TV Set (p.427) By connecting the camera to a TV set with an HDMI cable, you can play back the camera’s still photos and movies on the TV set. Using the HDMI Cable HTC100 (sold separately) is recommended. Even if the camera is connected to a TV set with an HDMI cable and a 4K time-lapse movie is played back, it will be played back in Full HD quality. (Playback in 4K quality is not possible.
k Enjoying Movies Playback and Editing with a Computer The movie files recorded on the card can be transferred to a computer and played back or edited with pre-installed or general-purpose software compatible with the movie’s recording format. To play back or edit a movie with commercially-available software, use software compatible with MP4-format and MOV-format movies. For details on commercially-available software, contact the software manufacturer.
k Playing Back Movies 1 Play back the image. Press the button to play back an image. a movie. 2 Select Turn the <5> dial to select the movie to be played back. In the single-image display, the icon displayed on the upper left indicates a movie. If the movie is a video snapshot, will be displayed. In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played back from the index display, press <0> to switch to the single-image display.
k Playing Back Movies Movie Playback Panel Operation Playback Description 7 Play* Pressing <0> toggles between playback and stop. 8 Slow motion Adjusts the slow motion speed by turning the <5> dial. The slow motion speed is indicated on the upper right of the screen. 5 First frame Displays the movie’s first frame. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie. 6 Next frame Plays the movie frame-by-frame each time you press <0>.
k Playing Back Movies Playback with the Touch Screen Tap [7] at the center of the screen. X The movie will start playing back. To display the movie playback panel, tap or on the upper left of the screen. To pause the movie while it is playing back, tap on the screen. The movie playback panel will also appear. If you play back a 4K time-lapse movie on the camera, the playback resolution will be equivalent to that of a Full HD movie played back on the camera.
X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. 1 On the movie playback screen, select [X]. X The movie editing panel will be displayed at the bottom of the screen. the part to be edited out. 2 Specify Select either [U] (Cut beginning) or [V] (Cut end), then press <0>. Press the keys to see the previous or next frames. Keep holding down the key to fast forward or fast rewind the frames.
X Editing a Movie’s First and Last Scenes the edited movie. 4 Save Select [W], then press <0>. X The save screen will appear. To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press <0>. On the confirmation dialog, select [OK] to save the edited movie and return to the movie playback screen. X Since the editing is performed in approx. 1-sec.
3 Slide Show (Auto Playback) You can play back the images on the card as an automatic slide show. 1 Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [Set image search conditions] under the [32] tab (p.402). [Slide show]. 2 Select Under the [32] tab, select [Slide show], then press <0>. the playback as desired. 3 SetSelect [Set up], then press <0>.
3 Slide Show (Auto Playback) Transition effect Background music the slide show. 4 StartSelect [Start], then press <0>. X After [Loading image...] is displayed, the slide show will start. slide show. 5 ExitTothe exit the slide show and return to the setting screen, press the button. When images for playback are already filtered (search conditions are set) with [32: Set image search conditions], the images matching the search conditions will be played back in the slide show.
3 Slide Show (Auto Playback) Selecting the Background Music If you use EOS Utility (EOS software, p.594) to copy background music tracks to the card, you can play the background music together with the slide show. 1 Select [Background music]. Set [Background music] to [On], then press <0>. If the card has no background music, you cannot perform step 2. the background music. 2 Select Press the keys to select the desired background music.
Viewing Images on a TV Set By connecting the camera to a TV set with an HDMI cable, you can play back the camera’s still photos and movies on the TV set. For the HDMI cable, HDMI Cable HTC-100 (sold separately) is recommended. If the picture does not appear on the TV screen, check if the [53: Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your TV set). 1 Connect the HDMI cable to the camera.
Viewing Images on a TV Set When the camera is connected to a TV set with an HDMI cable, 4K timelapse movies will be played back in Full HD quality (cannot be played back in 4K quality). Adjust movie sound volume with the TV set. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and TV set, turn off the camera and TV set. Depending on the TV set, part of the image displayed may be cut off.
Viewing Images on a TV Set the camera’s button. 4 Press X An image will appear on the TV screen and you can use the TV set’s remote control for playback. an image. 5 Select Point the remote control toward the TV set and press the / button to select an image. Still photo playback menu the remote control’s Enter 6 Press button.
L Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images (p.409) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Note that erasing a RAW+JPEG image will erase both the RAW and JPEG images. Erasing a Single Image 1 Select the image to be erased. Press the button to play back images.
L Erasing Images 3 Checkmarking [X] Images to Be Erased in a Batch By adding checkmarks to the images to be erased, you can erase all those images at once. 1 Select [Erase images]. Under the [31] tab, select [Erase images], then press <0>. [Select and erase images]. 2 Select X An image will be displayed. the image to be erased. 3 Select Turn the <5> dial to select the image to be erased, then press <0>. X A checkmark [X] will be displayed on the upper left of the screen.
L Erasing Images 3 Specifying the Range of Images to be Erased While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. 1 Select [Select range]. Select [Select range] in [31: Erase images], then press <0>. the range of images. 2 Specify Select the first image (start point), then press <0>. Next, select the last image (end point), then press <0>.
L Erasing Images 3 Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When [31: Erase images] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be erased. If the search conditions are set with [32: Set image search conditions] (p.402), the display will change to [All found images]. If you select [All found images], all the found images will be erased as specified.
3 Adjusting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to view. 1 Select [LCD brightness]. 2 Adjust the brightness. Under the [52] tab, select [LCD brightness], then press <0>. Referring to the gray chart, press the keys to adjust the brightness, then press <0>. To check the image’s exposure, referring to the histogram is recommended (p.398). The last image played back will be displayed on the screen in step 2.
3 Setting the Auto Rotation of Vertical Images Images shot in vertical orientation are rotated automatically to the proper orientation for viewing, so they will not be displayed in horizontal orientation when played back on the camera’s LCD monitor or viewed on a computer screen. You can change the setting of this feature. 1 Select [Auto rotate]. Under the [51] tab, select [Auto rotate], then press <0>. the display orientation. 2 SetSelect the desired setting, then press <0>.
11 Post-Processing Images This chapter describes RAW image processing, JPEG image resizing, and JPEG image cropping. The M icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (, , , , ). The camera may not be able to process images taken with another camera. Post-processing images as described in this chapter cannot be performed when the camera is connected to a computer with an interface cable (sold separately).
R Processing RAW Images with the CameraN You can process 1 images with the camera and save them as JPEG images. As the RAW image itself does not change, you can apply different processing conditions to create any number of JPEG images from it. Note that 41 and 61 images cannot be processed with the camera. Use Digital Photo Professional (EOS software, p.594) to process those images. 1 Select [RAW image processing]. Under the [31] tab, select [RAW image processing], then press <0>.
R Processing RAW Images with the CameraN Displaying the setting screen Press <0> to display the selected function’s setting screen. Turn the <6> or <5> dial to change the setting. Press <0> to finalize the setting and return to the previous screen. the image. 4 Save Select [W] (Save), then press <0>. When you select [OK], the JPEG image created by the processing will be saved to the card. Check the destination folder and image file number, then select [OK]. To process another image, repeat steps 2 to 4.
R Processing RAW Images with the CameraN Magnified View You can magnify the image by pressing the button in step 3. The magnification will vary depending on the [Image quality] setting under [x1: RAW image processing]. With <9>, you can scroll around the magnified image. To cancel the magnified view, press the button again. Images with Aspect Ratio Setting With [z4: Aspect ratio] (p.
R Processing RAW Images with the CameraN RAW Image Processing Options Brightness adjustment You can adjust the image brightness up to ±1 stop in 1/3-stop increments. The displayed image will reflect the setting’s effect. White balance (p.185) You can select the white balance. If you select [Q] and press the button, you can select [Auto: Ambience priority] or [Auto: White priority]. If you select [P] and press the button, you can set the color temperature.
R Processing RAW Images with the CameraN Color space (p.208) You can select either sRGB or Adobe RGB. Since the camera’s LCD monitor is not compatible with Adobe RGB, the difference in the image will hardly be perceptible when either color space is set. Lens aberration correction Peripheral illumination correction (p.200) A phenomenon that makes the image corners look darker due to the lens characteristics can be corrected. If [Enable] is set, the corrected image will be displayed.
R Processing RAW Images with the CameraN Diffraction correction (p.203) The diffraction by the lens aperture degrading the image sharpness can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image (p.440). Processing RAW images in the camera will not produce exactly the same results as processing RAW images with Digital Photo Professional (EOS software). If you perform [Brightness adjustment], noise, banding, etc.
S Resizing JPEG Images You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3, 4, and a images. JPEG b and RAW images cannot be resized. 1 Select [Resize]. Under the [32] tab, select [Resize], then press <0>. X An image will be displayed. an image. 2 Select Turn the <5> dial to select the image you want to resize. If you press the button and turn the <6> dial counterclockwise, you can select an image from the index display.
S Resizing JPEG Images Resize Options by Original Image Quality Available Resize Settings Original Image Quality 4 a b 3 k k k k k 4 k a Image Sizes Sizes for resized images are shown below. (Approx. pixels) Image Quality 4 Full-frame (3:2) 4:3 (aspect ratio) 4160x2768* (11.5 megapixels) 3680x2768* (10.2 megapixels) a 3120x2080 (6.5 megapixels) 2768x2080* (5.8 megapixels) b 2400x1600 (3.8 megapixels) 2112x1600* (3.
N Cropping JPEG Images You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG 3, 4, a, and b images. Images shot in RAW cannot be cropped. 1 Select [Cropping]. Under the [x2] tab, select [Cropping], then press <0>. X An image will be displayed. an image. 2 Select Turn the <5> dial to select the image you want to crop. If you press the button and turn the <6> dial counterclockwise, you can select an image from the index display.
N Cropping JPEG Images Moving the Cropping Frame Use <9> to move the frame over the image vertically or horizontally. Move the cropping frame until it covers the desired image area. Correcting the Tilt You can correct image tilt by ±10°. Press the button, then while checking the tilt against the grid, turn the <5> dial (in 0.1° increments) or tap the left or right wedge (in 0.5° increments) on the upper left of the screen to correct the tilt. After completing the tilt correction, press <0>.
12 Sensor Cleaning The camera has a Self Cleaning Sensor Unit to automatically shake off dust adhered to the image sensor’s front layer (low-pass filter). The Dust Delete Data can also be appended to the image so that the dust spots remaining can be deleted automatically by Digital Photo Professional (EOS software, p.594).
f Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit automatically shakes off the dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can manually perform sensor cleaning or can disable this unit as follows. Activating the Sensor Cleaning Manually 1 Select [Sensor cleaning]. Under the [54] tab, select [Sensor cleaning], then press <0>. [Clean nowf]. 2 Select Select [Clean nowf], then press <0>.
f Automatic Sensor Cleaning For best results, perform the sensor cleaning with the camera placed upright and stable on a table or other flat surface. Even if you repeat the sensor cleaning, the result will not improve much. Immediately after the sensor cleaning is finished, the [Clean nowf] option remains disabled temporarily. Dots of light may appear on images if the sensor is affected by cosmic rays, etc. By selecting [Clean nowf], their appearance may be suppressed (p.565).
3 Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However, for the case where visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later. The Dust Delete Data is used by Digital Photo Professional (EOS software, p.594) to erase the dust spots automatically. Preparation Prepare a solid white object such as a sheet of paper.
3 Appending Dust Delete DataN a solid-white object. 3 Shoot At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. X The picture will be taken in aperturepriority AE mode at an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no card in the camera. X When the picture is taken, the camera will start collecting the Dust Delete Data.
3 Appending Dust Delete DataN Dust Delete Data After the Dust Delete Data is obtained, it is appended to all the JPEG and RAW images captured thereafter. Before an important shoot, it is recommended that you update the Dust Delete Data by obtaining it again. For details about using Digital Photo Professional (EOS software, p.594) to erase dust spots automatically, refer to the Digital Photo Professional Instruction Manual (p.596).
3 Manual Sensor CleaningN Dust that could not be removed by the automatic sensor cleaning can be removed manually with a commercially-available blower, etc. Before cleaning the sensor, detach the lens from the camera. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1 Select [Sensor cleaning]. Under the [54] tab, select [Sensor cleaning], then press <0>. 2 Select [Clean manually]. [OK].
3 Manual Sensor CleaningN While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the reflex mirror will go back down. These may result in damaging the image sensor, shutter curtains, and reflex mirror. • Setting the power switch to <2>. • Removing or inserting the battery. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor.
13 Print order and Photobook Set-up Digital Print Order Format (DPOF) (p.458) You can specify printing instructions such as the image selection, quantity to print, etc. for the images recorded on the card. Specifying Images for a Photobook (p.464) You can specify the images for printing in a photobook from those saved on the card.
W Digital Print Order Format (DPOF) DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc. The print settings will be applied to all the images specified for printing.
W Digital Print Order Format (DPOF) K Print type Date File number Standard Prints one image on one sheet. L Index Multiple thumbnail images are printed on one sheet. K L Both Prints both the standard and index prints. On Off On Off [On] imprints the recorded date of the captured image. [On] imprints the file number. the setting. 4 ExitPress the button. X The print order screen will reappear. Next, select [Sel.Image] or [Multiple] to order the images to be printed.
W Digital Print Order Format (DPOF) RAW images or movies cannot be specified for printing. If you print an image with a large image size using the [Index] or [Both] setting (p.458), the index print may not be printed with certain printers. In such a case, resize the image (p.444), then print the index print. Even if [Date] and [File No.] are set to [On], the date or file number may not be imprinted, depending on the print type setting and printer. With [Index] prints, the [Date] and [File No.
W Digital Print Order Format (DPOF) 3 Specifying Images for Printing Selecting Images Select and specify the images one by one. If you press the button and turn the <6> dial counterclockwise, you can select an image from a three-image display. To return to the single-image display, turn the dial clockwise. Press the button to save the print order to the card. Standard / Both Quantity Total images selected Press <0> to print a copy of the displayed image.
W Digital Print Order Format (DPOF) Selecting Multiple Images Select Range Under [Multiple], select [Select range]. Select the first and last images of the desired range, then all the images in the range will be marked with the checkmark [X]. A print order for one copy of each image will be set. If an image marked with [X] is set as the first image, the images with [X] within the range from the first image to the last will be canceled. (The specified range will have no [X].
W Digital Print Order Format (DPOF) If the search conditions are set with [32: Set image search conditions] (p.402) and you select [Multiple], the display will change to [Mark all found images] and [Clear all found images]. All found images If you select [Mark all found images], a print order for one copy of all the images filtered by the search will be set. If you select [Clear all found images], the print order will be cleared for all the found images.
p Specifying Images for a Photobook You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to transfer images to a computer, the specified images for a photobook will be copied to a dedicated folder. This function is useful for ordering photobooks online. 3 Specifying One Image at a Time 1 Select [Photobook Set-up]. Under the [x1] tab, select [Photobook Set-up], then press <0>. 2 Select [Select images]. the image to be specified.
p Specifying Images for a Photobook 3 Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the first and last images for a range to all the specified images at once. 1 Select [Multiple]. Under [31: Photobook set-up], select [Multiple], then press <0>. 2 Select [Select range]. the range of images. 3 Specify Select the first image (start point), then press <0>. Next, select the last image (end point), then press <0>.
p Specifying Images for a Photobook 3 Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at once for a photobook. Under [x1: Photobook Set-up], you can set [Multiple] to [All images in folder] or [All images on card] to specify all the images in the folder or on the card for a photobook. To cancel the selection, select [Clear all in folder] or [Clear all on card]. If the search conditions are set with [32: Set image search conditions] (p.
14 Customizing the Camera You can make fine adjustments to various camera functions and change the functionality of buttons and dials to suit your picture-taking preferences with Custom Functions and Custom Controls. You can also save the camera’s current settings to the and modes. The functions described in this chapter are settable and usable in Creative Zone modes.
3 Setting Custom FunctionsN 1 Select the [8] tab. the desired group. 2 Select Select [C.Fn I: Exposure], [C.Fn II: Autofocus], or [C.Fn III: Operation/ Others], then press <0>. Custom Function number the Custom Function 3 Select number. Press the keys to select the Custom Function number, then press <0>. the setting as desired. 4 Change Press the keys to select the desired setting (number), then press <0>. Repeat steps 2 to 4 if you want to set another Custom Function.
3 Custom FunctionsN C.Fn I: Exposure 1 Exposure level increments 2 ISO speed setting increments 3 Bracketing auto cancel 4 Bracketing sequence 5 Number of bracketed shots 6 Safety shift 7 Exposure compensation auto cancel 8 Metering mode, AE locked after focus p.471 A LV Shooting k Movie Shooting k k k In a k p.472 p.473 p.474 C.Fn II: AF 1 Tracking sensitivity p.475 2 Acceleration/deceleration tracking p.476 3 AF point auto switching p.477 4 AI Servo 1st image priority p.
3 Custom FunctionsN C.Fn II: AF 9 AF area selection method p.482 10 Orientation linked AF point p.483 11 Initial AF point, 12 Auto AF point selection: Color AI Servo AF p.485 13 AF point selection movement p.486 14 AF point display during focus p.487 15 Viewfinder display illumination 16 AF Microadjustment Warnings z in viewfinder 2 Dial direction during Tv/Av 3 Retract lens on power off 4 Custom Controls 470 k Movie Shooting A LV Shooting k Movie Shooting k k k k p.
3 Custom Function SettingsN C.Fn I: Exposure C.Fn I-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. When [1:1/2-stop] is set, the display will be as shown below. C.Fn I-2 ISO speed setting increments 0: 1/3-stop 1: 1-stop You can change the manual ISO speed setting increments to a whole-stop.
3 Custom Function SettingsN C.Fn I-4 Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed. 0: 09-9+ 1: -909+ 2: +909White Balance Bracketing B/A Direction M/G Direction 0 : Standard exposure 0 : Standard white balance 0 : Standard white balance - : Decreased exposure - : Blue bias - : Magenta bias + : Increased exposure + : Amber bias + : Green bias AEB C.
3 Custom Function SettingsN C.Fn I-6 Safety shift 0: Disable 1: Shutter speed/Aperture Takes effect in the shutter-priority AE and aperturepriority AE modes. If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually-selected setting to obtain the standard exposure. 2: ISO speed Works in the Program AE, shutter-priority AE, and aperture-priority AE modes.
3 Custom Function SettingsN C.Fn I-7 Exposure compensation auto cancel 0: Disable The exposure compensation setting will not be canceled even if you set the power switch to <2>. 1: Enable When you set the power switch to <2>, the exposure compensation setting will be canceled. C.Fn I-8 Metering mode, AE locked after focus For each metering mode, you can set whether to lock the exposure (AE lock) after achieving focus with One-Shot AF by pressing the shutter button halfway.
3 Custom Function SettingsN C.Fn II: AF C.Fn II-1 Tracking sensitivity Sets the subject-tracking sensitivity during AI Servo AF when an obstacle cuts across the AF points or when the subject strays from the AF point. 0 Default setting. Suitable for moving subjects in general. Locked on: -2 / Locked on: -1 The camera will try to continue focusing on the subject even if an obstacle cuts across the AF points or if the subject strays from the AF points.
3 Custom Function SettingsN C.Fn II-2 Acceleration/deceleration tracking This sets the tracking sensitivity for moving subjects whose speed can momentarily change dramatically by starting or stopping suddenly, etc. 0 Suited for subjects that move at a steady speed (minor changes in moving speed). +2 / +1 Effective for subjects having sudden movements, sudden acceleration/deceleration, or sudden stops.
3 Custom Function SettingsN C.Fn II-3 AF point auto switching This sets the switching sensitivity of the AF points as they track the subject moving dramatically up, down, left, or right. This setting takes effect when the AF area selection mode is set to Zone AF, Large Zone AF, or Automatic selection AF. 0 Standard setting for gradual AF point switching.
3 Custom Function SettingsN C.Fn II-4 AI Servo 1st image priority You can set the AF operation characteristics and shutter-release timing for the first shot with AI Servo AF. Equal priority Equal priority is given to focusing and shutter release. : Release priority Pressing the shutter button takes the picture immediately even if focus has not been achieved. Useful when you want to give priority to capturing the decisive moment rather than achieving focus.
3 Custom Function SettingsN C.Fn II-5 AI Servo 2nd image priority With AI Servo AF for continuous shooting, you can preset the AF operation characteristics and shutter-release timing for the subsequent shots after the first shot in continuous shooting. Equal priority Equal priority is given to focusing and continuous shooting speed. In low light or with low-contrast subjects, continuous shooting speed may slow down.
3 Custom Function SettingsN C.Fn II-6 AF-assist beam firing Enables or disables the EOS-dedicated external Speedlite’s AF-assist beam. 0: Enable The external Speedlite emits the AF-assist beam when necessary. 1: Disable The external Speedlite will not emit the AF-assist beam. This prevents the AF-assist beam from disturbing others. 2: IR AF assist beam only When an external Speedlite is attached, only the infrared AF-assist beam will be emitted.
3 Custom Function SettingsN C.Fn II-7 Lens drive when AF impossible If focus cannot be achieved with autofocus, you can have the camera keep searching for the precise focus or have it stop searching. 0: Continue focus search If focus cannot be achieved with autofocus, the lens is driven to search for the precise focus. 1: Stop focus search If autofocus starts and the focus is far off or if focus cannot be achieved, the lens drive will not be performed.
3 Custom Function SettingsN C.Fn II-9 AF area selection method You can set the method for changing the AF area selection mode. 0: S 9 AF area selection button After you press the or button, pressing the button will change the AF area selection mode. 1: S 9 Main Dial After you press the or button, turning the <6> dial will change the AF area selection mode. When [1: S9Main Dial] is set, use the <9> to move the AF point horizontally.
3 Custom Function SettingsN C.Fn II-10 Orientation linked AF point You can set the AF point or the AF area selection mode + AF point separately for vertical shooting and horizontal shooting. 0: Same for both vert/horiz The same AF area selection mode and manually-selected AF point (or zone) are used for both vertical shooting and horizontal shooting. 1: Separate AF pts: Area+pt The AF area selection mode and AF point (or zone) can be set separately for each camera orientation (1. Horizontal, 2.
3 Custom Function SettingsN C.Fn II-11 Initial AF Point, AI Servo AF You can set the AI Servo AF’s starting AF point for when the AF area selection mode is set to Auto selection AF. 0: Auto The AF point that AI Servo AF starts with is set automatically to suit the shooting conditions. 1: Initial AF pt selected AI Servo AF will start with the manually-selected AF point when the AF operation is set to AI Servo AF and the AF area selection mode is set to Auto selection AF.
3 Custom Function SettingsN C.Fn II-12 Auto AF point selection: Color tracking Use this function to autofocus by recognizing colors equivalent to skin tones. This function works when the AF area selection mode is set to Zone AF (manual selection of zone), Large Zone AF (manual selection of zone), or Automatic selection AF. 0: Enable The camera selects AF points automatically based on AF information and information on colors equivalent to skin tones.
3 Custom Function SettingsN C.Fn II-13 AF point selection movement You can set either to stop the selection at the outer edge or it can cycle around to the opposite side in AF point selection. 0: Stops at AF area edges Useful if you often use an AF point along the edge. 1: Continuous Instead of stopping at the outer edge, the selection of AF point continues to the opposite side. With [8C.
3 Custom Function SettingsN C.Fn II-14 AF point display during focus You can set whether to display the AF point(s) before AF starts (shooting ready), when AF starts, during AF, when focus is achieved, and when the metering timer is active after focus is achieved.
3 Custom Function SettingsN C.Fn II-15 Viewfinder display illumination You can set whether the AF points in the viewfinder will light up in red when focus is achieved. 0: Auto The AF points achieving focus in low light or with a dark subject will automatically light up in red. 1: Enable The AF points light up in red regardless of the ambient light level. 2: Disable The AF points do not light up in red.
3 Custom Function SettingsN C.Fn III: Operation/Others C.Fn III-1 Warnings z in viewfinder When any of the following functions are set, the icon can be displayed in the viewfinder and on the LCD panel (p.31). Select the function for which you want the warning icon to appear, then press <0> to add a checkmark [X]. Then select [OK] to register the setting. When monochrome V is set If [z3: Picture Style] is set to [Monochrome] (p.178), the warning icon will appear.
3 Custom Function SettingsN C.Fn III-2 Dial direction during Tv/Av 0: Normal 1: Reverse direction Dial turning direction when setting the shutter speed and aperture can be reversed. In the shooting mode, the turning direction of the <6> and <5> dials will be reversed. In other shooting modes, the turning direction of only the <6> dial will be reversed.
8: Fine Adjustment of AF’s Point of FocusN Fine adjustment of the AF’s point of focus is possible for viewfinder shooting. This is called “AF Microadjustment”. Before making the adjustment, read “General Cautions for AF Microadjustment” and “Notes for AF Microadjustment” on page 496. Normally, this adjustment is not required. Perform this adjustment only if necessary. Note that performing this adjustment may prevent accurate focusing from being achieved.
8: Fine Adjustment of AF’s Point of FocusN the adjustment. 5 Make Set the adjustment amount. The adjustable range is ±20 steps. Setting it toward “-: ” will shift the point of focus in front of the standard point of focus. Setting it toward “+: ” will shift the point of focus to behind the standard point of focus. After making the adjustment, press <0>. Select [1: All by same amount], then press <0>. the result of the 6 Check adjustment. Take a picture and play back the image (p.
8: Fine Adjustment of AF’s Point of FocusN 2: Adjust by Lens You can make the adjustment for each lens and register the adjustment in the camera. You can register the adjustment for up to 40 lenses. When you autofocus with a lens whose adjustment is registered, the point of focus will always be shifted by the adjustment amount. Set the adjustment amount manually by repeatedly making adjustments, shooting, and checking the results until the desired result is achieved.
8: Fine Adjustment of AF’s Point of FocusN Entering the Serial Number Select the digit to be entered, then press <0> so is displayed. Enter the number, then press <0>. After entering all the digits, select [OK]. Lens Serial Number In step 3, if “*” appears in front of the 10-digit lens serial number, you can register only one unit of the same lens model. Even if you enter the serial number, “*” will remain displayed.
8: Fine Adjustment of AF’s Point of FocusN Single focal length lens Zoom lens the adjustment. 4 Make For a zoom lens, select the wideangle (W) or telephoto (T) end. Pressing <0> will turn off the orange frame and make the adjustment possible. Set the adjustment amount, then press <0>. The adjustable range is ±20 steps. Setting it toward “-: ” will shift the point of focus in front of the standard point of focus. Setting it toward “+: ” will shift the point of focus to behind the standard point of focus.
8: Fine Adjustment of AF’s Point of FocusN When shooting with the intermediate range (focal length) of a zoom lens, the AF’s point of focus is corrected automatically relative to the adjustments made for the wide-angle and telephoto ends. Even if only the wide-angle or telephoto end is adjusted, a correction will be made automatically for the intermediate range.
8: Custom ControlsN You can assign frequently-used functions to camera buttons or dials according to your preferences for easy operations. 1 Select [C.Fn III: Operation/ Others]. Under the [8] tab, select [C.Fn III: Operation/Others], then press <0>. [4: Custom Controls]. 2 Select X The Custom Controls setting screen will appear. a camera button or dial. 3 Select Select a camera button or dial, then press <0>. X The name of the camera control and the assignable functions will be displayed.
8: Custom ControlsN Assignable Functions to Camera Controls Function Page k Metering and AF start AF AF stop 500 ONE SHOT z AI SERVO/SERVO k k k k k k Direct AF point selection Pause Movie Servo AF k Metering start AE lock/FE lock 501 AE lock (hold) Exposure AE lock FE lock ) Exposure compensation (hold button, turn Flash exposure compensation k k k k k k k k k k k k k k AE lock (while button pressed) Set ISO speed (hold button, turn k ) 502 Shutter speed setting in M mod
8: Custom ControlsN k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k < > stands for “AF stop button” provided on super telephoto lenses equipped with Image Stabilizer.
8: Custom ControlsN AF : Metering and AF start When you press the button assigned to this function, metering and AF are performed. : AF stop The AF will stop while you hold down the button assigned to this function. Useful when you want to stop the AF during AI Servo AF. : ONE SHOT z AI SERVO/SERVO You can switch the AF operation. In One-Shot AF mode, when you press the button to which this function is assigned, the camera switches to AI Servo AF/Servo AF mode.
8: Custom ControlsN Exposure : Metering start When you press the shutter button halfway, exposure metering is performed. (AF is not performed.) : AE lock/FE lock When you press the button assigned to this function, you can lock the exposure (AE lock) while the metering timer is active. Useful when you want to set the focus and exposure separately. For flash photography, pressing the button assigned to this function will fire a preflash and retain the required flash output (FE lock).
8: Custom ControlsN : FE lock For flash photography, pressing the button assigned to this function will fire a preflash and retain the required flash output (FE lock). : Set ISO speed (hold button, turn ) You can set the ISO speed by holding down the button assigned with this function and turning the <6> dial (works with still photo shooting only). If this control is used with ISO Auto set, you can set the ISO speed manually. When the metering timer (0) ends, ISO Auto will be restored.
8: Custom ControlsN Image : Image quality Press <0> to display the recording quality setting screen (p.162) on the LCD monitor. : Picture Style Press <0> to display the Picture Style selection screen (p.176) on the LCD monitor. : White balance selection Press <0> to display the white balance setting screen (p.185) on the LCD monitor. Operation : Depth-of-field preview When you press the depth-of-field preview button or <0>, the aperture will stop down and you can check the depth of field (p.240).
8: Custom ControlsN : Flash function settings Press <0> to display the flash function setting screen (p.283). : Wi-Fi function Press <0> to display the wireless communication setting screen (p.540). : No function (disabled) Use this setting when you do not want to assign any function to the button.
3 Registering My MenuN Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. You can also name the registered menu tabs, and press the button to display the My Menu tab first. Creating and Adding My Menu Tab 1 Select [Add My Menu tab]. Under the [9] tab, select [Add My Menu tab], then press <0>. [OK]. 2 Select X The [MY MENU1] tab is created. You can create up to five My Menu tabs by repeating steps 1 and 2.
3 Registering My MenuN 2 Select [Select items to register]. the desired items. 3 Register Select the option to be set, then press <0>. Select [OK] on the confirmation dialog. You can register up to six items. To return to the screen in step 2, press the button. My Menu Tab Settings You can sort and delete items under the menu tab, and rename or delete the menu tab. Sort registered items You can change the order of the registered items in My Menu.
3 Registering My MenuN Delete tab You can delete the My Menu tab currently displayed. Select [Delete tab] to delete the [MY MENU*] tab. Rename tab You can rename the My Menu tab from [MY MENU*]. 1 Select [Rename tab]. text. 2 Enter Press the button to delete any Input mode unnecessary characters. Use <9> or <5> <6> to move the n and select the desired character. Then press <0> to enter it. By selecting [Aaz1@], you can change the input mode. You can enter up to 16 characters.
3 Registering My MenuN Deleting all My Menu tabs / Deleting all items You can delete all the created My Menu tabs or My Menu items registered under them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [9] tab will revert to its default. Delete all items You can delete all the items registered under the [MY MENU1] to [MY MENU5] tabs. The tab(s) will remain.
3 Registering My MenuN Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [9] tab selected. Display only My Menu tab Only the [9] tab is displayed. (The z, 3, 5, and 8 tabs will not be displayed.
w: Registering Custom Shooting ModesN You can register current camera settings, such as the shooting functions, menu functions, and Custom Function settings, as Custom shooting modes under the Mode Dial’s and positions. 1 Select [Custom shooting mode (C1, C2)]. Under the [55] tab, select [Custom shooting mode (C1, C2)], then press <0>. 2 Select [Register settings]. the desired items. 3 Register Select the Custom shooting mode to be registered, then press <0>.
w: Registering Custom Shooting ModesN My Menu settings will not be registered under Custom shooting modes. Even in the and modes, you can still change shooting function settings and menu settings.
w: Registering Custom Shooting ModesN [z4 (Movie shooting)] Movie Servo AF, AF method, Movie Servo AF tracking sensitivity, Movie Servo AF speed, Metering timer, Grid, V button function [z5 (Movie shooting)] Video snapshot, Time-lapse movie (setting), Movie digital IS, Remote control [x2] Slide show (settings), Image jump with 6 [x3] Highlight alert, AF point display, Playback grid, Histogram display, Magnification (approx.
15 Reference This chapter provides reference information for system accessories, camera features, etc. Certification Logo Select [55: Certification Logo Display] and press <0> to display some of the logos of the camera’s certifications. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
System Map ST-E2 ST-E3-RT Eyepiece Extender EP-EX15 Rubber Frame Eb 270EX II 430EX III-RT/ 600EX II-RT 430EX III Macro Ring Lite MR-14EX II Macro Twin Lite MT-24EX Bundled Accessories Eyecup Eb E-series Dioptric Adjustment Lenses Strap Angle Finder C Battery Pack LP-E6N*1 Battery Charger LC-E6 Protecting Cloth PC-E1 AC Adapter DC Coupler AC-E6N*2 DR-E6*2 Hand Strap E2 514 Battery Grip BG-E21 Battery Magazine BGM-E21L for LP-E6N/LP-E6 (attached to BG-E21) Car Battery Cable CB-570 Car Batte
System Map Timer Remote Remote Switch Controller RS-80N3 TC-80N3 Directional Stereo Microphone DM-E1 Wireless Controller LC-5 Remote Wireless Controller Remote RC-6 Control BR-E1 EF lenses HDMI Cable HTC-100 (2.9 m/9.5 ft.) TV/Monitor Interface Cable IFC-400PCU (1.3 m/4.3 ft.) Connect Station CS100 Interface Cable IFC-200U (1.9 m/6.2 ft.) Interface Cable IFC-500U (4.7 m/15.4 ft.) SD/SDHC/SDXC memory card USB port Card reader Computer Card slot *1: Battery Pack LP-E6 can also be used.
3 Checking the Battery Information You can check the conditions of the battery you are using on the LCD monitor. Each Battery Pack LP-E6N/LP-E6 has a unique serial number, and you can register multiple battery packs to the camera. When you use this feature, you can check the registered batteries’ approximate remaining capacity and usage history. Select [Battery info.]. Under the [54] tab, select [Battery info.], then press <0>. X The battery information screen will appear.
3 Checking the Battery Information Registering Batteries to the Camera You can register up to six LP-E6N/LP-E6 batteries to the camera. To register multiple batteries to the camera, follow the procedure below for each battery. 1 Press the button. With the battery info. screen displayed, press the button. X The battery history screen will appear. X If the battery is not registered, it will be grayed out. [Register]. 2 Select X The confirmation dialog will appear. [OK].
3 Checking the Battery Information Labeling Serial Numbers on Batteries It is convenient to label each registered Battery Pack LP-E6N/LP-E6 with their serial numbers, using commercially-available labels. 1 Serial number Write the serial number on a label. Write the serial number displayed on the battery history screen on a label approx. 25 mm x 15 mm / 1.0 in. x 0.6 in. in size. 7c40 0300 the battery and affix the 2 Remove label. Set the power switch to <2>.
3 Checking the Battery Information Checking the Remaining Capacity of a Registered Battery You can check the remaining capacity of any battery (even when not installed) and also when it was last used. Serial number Date last used Look for the serial number. Refer to the battery’s serial number label and look for the battery’s serial number on the battery history screen. X You can check the respective battery’s remaining capacity and the date when it was last used.
Using a Household Power Outlet You can power the camera with a household power outlet by using the DC Coupler DR-E6 and AC Adapter AC-E6N (each sold separately). 1 Place the cord in the groove. Carefully insert the DC coupler’s cord into the groove without damaging the cord. the DC coupler. 2 Insert Open the battery compartment cover DC coupler cord hole and open the DC coupler cord hole cover. Insert the DC coupler securely until it locks and put the cord through the hole. Close the cover.
Using a Household Power Outlet Do not use an AC adapter other than the AC-E6N (sold separately). While the camera’s power switch is on, do not connect or disconnect the power cord or connector, or disconnect the DC coupler. After using the camera, unplug the power plug from the power outlet. AC Adapter Kit ACK-E6 can also be used.
H Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card manufacturer.
H Using Eye-Fi Cards the connection 4 Display information. Select [Connection info.], then press <0>. the [Access point SSID:]. 5 Check Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the button to exit the menu. the picture. 6 Take X The picture is transferred and the Transmission status [H] icon switches from gray (not connected) to one of the icons in the sequence below.
H Using Eye-Fi Cards Cautions for Using Eye-Fi Cards Under [Wi-Fi settings] of [51: Wireless communication settings], if [Wi-Fi] set to [Enable], image transfer with an Eye-Fi card will not be possible. If “J” is displayed, an error occurred while retrieving the card information. Turn the camera’s power switch off and on again. Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal.
Function Availability Table by Shooting Mode Still Photo Shooting (A, C, Creative Zone) o: Set automatically k: User selectable Function A Shooting with ambience selection Background blur setting Image-recording RAW k quality JPEG k Aspect ratio Automatically set/Auto o ISO speed Manually set Auto o Picture Style Manual selection Auto o Preset White Custom balance Color temperature setting Correction/Bracketing Auto Lighting Optimizer o High ISO speed noise reduction o Long exposure noise reduction Highligh
Function Availability Table by Shooting Mode Function A C d s f a F k High-speed continuous shooting k Low-speed continuous shooting k Silent single shooting*1 k Silent continuous shooting*1 k 10-sec. self-timer/Remote control k 2-sec.
Function Availability Table by Shooting Mode Still Photo Shooting (8: 2 q 3 5C r) o: Set automatically k: User selectable Function Brightness Color tone Panning effect Image-recording RAW quality JPEG Aspect ratio Automatically set/Auto ISO speed Manually set Auto Picture Style Manual selection Auto Preset White Custom balance Color temperature setting Correction/Bracketing Auto Lighting Optimizer High ISO speed noise reduction Long exposure noise reduction Highlight tone priority Peripheral illumination c
Function Availability Table by Shooting Mode Function Single shooting High-speed continuous shooting Low-speed continuous shooting Drive Silent single shooting*1 Silent continuous shooting*1 10-sec. self-timer/Remote control 2-sec.
Function Availability Table by Shooting Mode Still Photo Shooting (8: 4 P y 6 F G) o: Set automatically k: User selectable Function Brightness Color tone Panning effect Image-recording RAW quality JPEG Aspect ratio Automatically set/Auto ISO speed Manually set Auto Picture Style Manual selection Auto Preset White Custom balance Color temperature setting Correction/Bracketing Auto Lighting Optimizer High ISO speed noise reduction Long exposure noise reduction Highlight tone priority Peripheral illumination
Function Availability Table by Shooting Mode Function Single shooting High-speed continuous shooting Low-speed continuous shooting Drive Silent single shooting*1 Silent continuous shooting*1 10-sec. self-timer/Remote control 2-sec.
Function Availability Table by Shooting Mode Movie Shooting o: Set automatically k: User selectable Function Movie recording quality selectable Auto Sound recording : Not selectable/Disabled A/C 8 d/s/f/F a y u k M k o*1 k k o o k k k k o o k k k k Custom Wind filter Attenuator o*2 HDR movie Time-lapse movie 4K k k k Full HD k k k k k k Video snapshot ISO speed Picture Style o o o k o o k k k k o o k k Preset k k Custom k k Color temperature set
Function Availability Table by Shooting Mode A/C 8 d/s/f/F a y u k M u+Tracking k k k k Smooth zone k k k k Live 1-point AF k k k k Manual focusing (MF) k k k k Movie servo AF k k k k • Tracking sensitivity k k • AF speed k k o o Exposure compensation k k *3 AE lock k k *4 Function AF o Metering o Program shift Exposure GPS function k k k k Remote control shooting k k k k Quick Control k k k k Touch operation k k k k *1: Automatically
3Menu Settings Viewfinder Shooting (Basic Zone Modes) z: Shooting 1 (Red) Image quality*1 1 / 41 / 61 73, 83, 74, 84, 7a, 8a, b Page 162 Image review time Off / 2 sec. / 4 sec. / 8 sec. / Hold 74 Release shutter without card Enable / Disable 44 Interval timer Disable / Enable (Interval / Number of shots) 267 Live View shooting Enable / Disable 291 *1: In the and modes, RAW quality cannot be selected.
3Menu Settings Viewfinder Shooting and Live View Shooting (Creative Zone Modes) z: Shooting 1*1 (Red) Image quality 1 / 41 / 61 73, 83, 74, 84, 7a, 8a, b Page 162 Image review time*2 Off / 2 sec. / 4 sec. / 8 sec.
3Menu Settings z: Shooting 2 (Red) Exposure compensation/ AEB setting*1 zISO speed settings*3 Auto Lighting Optimizer White balance Page Exposure compensation: ±5 stops*2 in 1/3- or 1/2-stop increments AEB: ±3 stops in 1/3- or 1/2-stop increments ISO speed / ISO speed range / Auto range / Minimum shutter speed Disable / Low / Standard / High Disabled in M or B modes Q (Ambience priority) / Qw (White priority) / W/E/R/Y/U/D/O/P (Approx.
3Menu Settings z: Shooting 3 (Red) Page Picture Style DAuto / PStandard / QPortrait / RLandscape / uFine Detail / SNeutral / UFaithful / VMonochrome / WUser Defined 1-3 176 Noise reduction for long exposures*1 Disable / Auto / Enable 197 High ISO speed noise reduction Disable / Low / Standard / High / Multi Shot Noise Reduction*1 195 Highlight tone priority Disable / Enable 199 Dust Delete Data*1 Obtain data to be used with Digital Photo Professional (EOS software) to delete dust spots 452
3Menu Settings z: Shooting 4 (Red) Page Interval timer*1*2 Disable / Enable (Interval / Number of shots) 267 Bulb timer Disable / Enable (Exposure time) 251 Anti-flicker shooting* 1 Disable / Enable 206 Mirror lockup*1 Disable / Enable 265 Aspect ratio 3:2 / 4:3 / 16:9 / 1:1 168 Live View shooting*1*2 Enable / Disable 291 *1: Not displayed for Live View shooting. *2: In Basic Zone modes, these menu options are displayed under the [z1] tab.
3Menu Settings 3: Playback 1 (Blue) Page Protect images Protect images 409 Rotate image Rotate images 408 Erase images Erase images 430 Print order Specify images to be printed (DPOF) 458 Photobook set-up Specify images for a photobook 464 RAW image processing Process 1 images 3: Playback 2 (Blue) 438 Page Cropping Partially crop JPEG images 446 Resizing Downsize JPEG image’s pixel count 444 Rating Rate images 412 Slide show Display time / Repeat / Transition effect / Backgrou
3Menu Settings 5: Set-up 1 (Yellow) Select folder File numbering Page Create and select a folder Numbering: Continuous / Auto reset Manual reset 209 211 Vertical image auto rotation OnzD / OnD / Off 435 Format card Erase data on the card by formatting 70 Eye-Fi settings Displayed when a commercially-available EyeFi card is inserted 522 Wi-Fi settings: Wi-Fi / NFC connection / Password / Connection history / MAC address Wireless communication settings*1 Wi-Fi function: Transfer images between
3Menu Settings 5: Set-up 2 (Yellow) Page Auto power off 1 min. / 2 min. / 4 min. / 8 min. / 15 min. / 30 min. / Disable 73 LCD brightness LCD brightness adjustable to 7 levels 434 LCD off/on*1 Remains on / Shutter btn. 74 Date/Time/Zone Date (year, month, day) / Time (hr., min., sec.
3Menu Settings 5: Set-up 4 (Yellow): For viewfinder shooting Page Touch operation Standard / Sensitive / Disable 69 Beep Enable / Touch / Disable 73 Battery information Power source / Remaining capacity / Shutter count / Recharge performance 516 Auto cleaningf: Enable / Disable Sensor cleaning zbutton display options*1 Clean nowf 450 Clean manually 455 Electronic level / Quick Control screen 84 Main Dial Multi function lock Quick Control Dial Multi-controller 88 Touch operation *1: Fo
3Menu Settings 5: Set-up 5 (Yellow) Page Custom shooting modes (C1, C2) Register setting / Clear settings / Auto update settings 510 Clear all camera settings Resets the camera to the default settings 75 Copyright information Display copyright information / Enter author’s name / Enter copyright details / Delete copyright information 214 Manual/software URL URL and QR code for downloading Instruction Manuals and software 5 Certification Logo Display Displays some of the logos of the camera’s
3Menu Settings 8: Custom Functions (Orange) C.Fn I: Exposure C.Fn II: Autofocus 471 Customize camera functions as desired C.Fn III: Operation/ Others Clear all Custom Functions (C.
3Menu Settings Movie Shooting z: Shooting 1 (Red) Page 1920x1080 / 1280x720 Movie recording size NTSC: 59.94p / 29.97p / 23.98p PAL: 50.00p / 25.00p 341 Standard (IPB) / Light (IPB) Sound recording*1: Auto / Manual / Disable Sound recording Sound-recording level 346 Wind filter: Auto / Disable Attenuator: Disable / Enable 347 *1: In Basic Zone modes, it will be [Enable] [Disable].
3Menu Settings z: Shooting 4*1 (Red) Page Movie Servo AF Enable / Disable 373 AF method u+Tracking / Smooth zone / Live 1-point AF 374 Movie Servo AF tracking sensitivity Locked on (-3/-2/-1) / 0 / Responsive (+1/+2/+3) 375 When active: Always on / During shooting Movie Servo AF Speed AF speed: Slow (-7/-6/-5/-4/-3/-2/-1) / Standard / Fast (+1/+2) 376 Metering timer 4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min.
3Menu Settings z: Shooting 5*1 (Red) Page Video snapshot: Enable / Disable Video snapshot Album settings: Create a new album / Add to existing album 361 Show confirm message: Enable / Disable 364 Time-lapse movie: Disable / Enable H(3840x2160) / Enable L(1920x1080) 350 Shooting interval (hr., min., sec.
Troubleshooting Guide If a problem occurs with the camera, first consult this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery does not recharge. If the battery’s remaining capacity (p.516) is 94% or higher, the battery will not be recharged. Do not use any battery other than genuine Canon Battery Pack LP-E6N/LP-E6. The charger’s lamp blinks at high speed.
Troubleshooting Guide The access lamp still lights or blinks even when the power switch is <2>. If the power is turned off while an image is being recorded to the card, the access lamp will remain on or continue to blink for a few seconds. When the image recording is complete, the power will turn off automatically. [Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery other than genuine Canon Battery Pack LP-E6N/LP-E6. Remove and install the battery again (p.
Troubleshooting Guide The camera turns off by itself. Auto power off is in effect. If you do not want auto power off to take effect, set [52: Auto power off] to [Disable] (p.73). Even if [52: Auto power off] is set to [Disable], the LCD monitor will still turn off after the camera is left idle for approx. 30 min. (The camera’s power does not turn off.) Shooting-Related Problems The lens cannot be attached. The camera cannot be used with EF-S or EF-M lenses (p.53). The viewfinder is dark.
Troubleshooting Guide The card cannot be used. If a card error message is displayed, see page 45 or 567. An error message is displayed when the card is inserted in another camera. Since SDXC cards are formatted in exFAT, if you format a card with this camera and then insert it into another camera, an error may be displayed and it may not be possible to use the card. I have to press the shutter button twice to take a picture. Set [z4: Mirror lockup] to [Disable]. The image is out of focus or blurred.
Troubleshooting Guide There are fewer AF points or the Area AF frame shape is different. Depending on the attached lens, the number of usable AF points and patterns and Area AF frame shape vary. The lenses are categorized into 8 groups from A to H (p.145). Check which group your lens belongs to. Using a lens in Groups E to H will have fewer usable AF points (p.147-148). The AF point is blinking or two AF points are displayed.
Troubleshooting Guide The continuous shooting speed is slow. The continuous shooting speed for high-speed continuous shooting may decrease depending on the temperature, battery level, flicker reduction, shutter speed, aperture, subject conditions, brightness, AF operation, lens, Live View shooting, flash use, shooting function settings, etc. For details, see page 156 or 158. The maximum burst during continuous shooting is lower.
Troubleshooting Guide ISO 100 cannot be set. ISO speed expansion cannot be selected. If [z3: Highlight tone priority] is set to [Enable], the settable ISO speed range will be ISO 200 - ISO 40000 (for still photo shooting). Even if you set [ISO speed range] to expand the setting range, you cannot select L (equivalent to ISO 50), H1 (equivalent to ISO 51200), or H2 (equivalent to ISO 102400). When [z3: Highlight tone priority] is set to [Disable] (p.199), you can set ISO 100/125/160, L, or H1/H2.
Troubleshooting Guide When I use the mode with flash, the shutter speed becomes slow. If you shoot at night when the background is dark, the shutter speed automatically becomes slow (slow-sync shooting) so that both the subject and background are properly exposed. To prevent a slow shutter speed, under [z1: External Speedlite control], set [Flash sync. speed in Av mode] to [1/180-1/60sec. auto] or [1/180 sec. (fixed)] (p.282). The flash does not fire.
Troubleshooting Guide Remote control shooting is not possible. When taking still photos, set the drive mode to or (p.157). When shooting movies, set [z5: Remote control] to [Enable] (p.381). Check the position of the remote controller’s release timing switch. If you are using Wireless Remote Control BR-E1, see page 273.
Troubleshooting Guide Shot images are not displayed when continuous shooting is performed during Live View shooting. If the image-recording quality is set to 41 or 61, the shot images are not displayed during continuous shooting (p.291). During movie shooting, the red E icon is displayed. It indicates that the camera’s internal temperature is high. If the red icon is displayed, it indicates that the movie shooting will soon stop automatically (p.382). Movie shooting stops by itself.
Troubleshooting Guide The manually set ISO speed changes when switching to movie shooting. For viewfinder shooting and Live View shooting, the ISO speed will be set according to [ISO speed range] under [z2: zISO speed settings] (p.173). For movie shooting, the ISO speed will be set according to [ISO speed range] under [z2: kISO speed settings] (p.372). The exposure changes during movie shooting. If you change the shutter speed or aperture during movie shooting, the changes in the exposure may be recorded.
Troubleshooting Guide The subject looks distorted during movie shooting. If you move the camera to the left or right (panning) or shoot a moving subject, the image may look distorted. The problem may be more noticeable in time-lapse movie shooting. I cannot take still photos during movie shooting. Still photos cannot be taken during movie shooting. To take still photos, stop the movie shooting and perform viewfinder shooting or Live View shooting. Wi-Fi Wi-Fi function cannot be set.
Troubleshooting Guide Operation Problems I cannot change the setting with the <6>, <5>, <9>, or . Set the switch downward (lock release) (p.59). Check the [54: Multi function lock] setting (p.88). Touch operation is not possible. Make sure [54: Touch control] is set to [Standard] or [Sensitive] (p.69). A camera button or dial does not work as expected. For movie shooting, check the [z4: V btn function] setting (p.378). Check the [8C.Fn III-4: Custom Controls] setting (p.497).
Troubleshooting Guide The file name’s first character is an underscore (“_”). Set [z2: Color space] to [sRGB]. If [Adobe RGB] is set, the first character will be an underscore (p.208). The file name starts with “MVI_”. It is a movie file (p.211). The file numbering does not start from 0001. If the card already contains recorded images, the image number may not start from 0001 (p.211). The shooting date and time displayed are incorrect. Make sure the correct date and time are set (p.49).
Troubleshooting Guide [###] is displayed. If the number of images recorded on the card exceeds the number the camera can display, [###] will be displayed. In the viewfinder, the AF point display speed is slow. In low temperatures, the display speed of the AF points may become slower due to the AF point display device’s (liquid crystal) characteristics. The display speed will return to normal at room temperature. The LCD monitor does not display a clear image.
Troubleshooting Guide Playback Problems Part of the image blinks in black. [33: Highlight alert] is set to [Enable] (p.397). A red box is displayed on the image. [33: AF point disp.] is set to [Enable] (p.397). During image playback, the AF points are not displayed. The AF points are not displayed when the following types of images are played back: • Images taken in the <8: qFG> modes. • Images taken with distortion correction applied. • Images taken with Multi Shot Noise Reduction applied.
Troubleshooting Guide Operation sound and mechanical sound can be heard during movie playback. If you operate the camera’s dials or lens during movie shooting, the operation sound will also be recorded. Using the Directional Stereo Microphone DM-E1 (sold separately) is recommended (p.347). The movie appears to freeze momentarily. If there is a drastic change in the exposure level during autoexposure movie shooting, the recording will stop momentarily until the brightness stabilizes.
Troubleshooting Guide My card reader does not recognize the card. Depending on the card reader used and the computer’s operating system, SDXC cards may not be correctly recognized. In such a case, connect your camera to the computer with the interface cable (sold separately), then transfer the images to the computer using EOS Utility (EOS software, p.594). I cannot process the RAW image. 41 and 61 images cannot be processed with the camera. Use Digital Photo Professional (EOS software, p.
Troubleshooting Guide Sensor Cleaning Problems The shutter makes a sound during sensor cleaning. Under [54: Sensor cleaning], when you select [Clean nowf], the shutter will make a mechanical sound during the cleaning, but no picture will be recorded to the card (p.450). Automatic sensor cleaning does not work. If you repeatedly turn the power switch <1> and <2> within a short time period, the icon may not be displayed (p.47). Computer Connection Problems I cannot transfer images to a computer.
Error Codes Error number If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Cause and countermeasures Number 01 02 Error Message and Solution Communications between the camera and lens is faulty. Clean the lens contacts. Î Clean the electrical contacts on the camera and lens, use a genuine Canon lens, or remove and install the battery again (p.27, 28, 42). Card cannot be accessed. Reinsert/change card or format card with the camera.
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera SD/SDHC*/SDXC* memory cards * UHS-I cards compatible. Approx. 35.9 x 24.0 mm Canon EF lenses * Excluding EF-S and EF-M lenses (The effective angle of view of a lens is approximately equivalent to that of the focal length indicated.) Canon EF mount • Image Sensor Type: Effective pixels: Aspect ratio: Dust deletion: CMOS sensor Approx. 26.
Specifications • Image Processing During Shooting Picture Style: White balance: Automatic image brightness correction: Noise reduction: Highlight tone priority: Lens aberration correction: Auto, Standard, Portrait, Landscape, Fine Detail, Neutral, Faithful, Monochrome, User Defined 1 - 3 Auto (Ambience priority), Auto (White priority), Preset (Daylight, Shade, Cloudy, Tungsten light, White fluorescent light, Flash), Custom, Color temperature setting (approx.
Specifications • Autofocus (during viewfinder shooting) Type: TTL secondary image-registration, phase-difference detection with the dedicated AF sensor AF points: Max. 45 points (Cross-type AF point: Max. 45 points) * Number of available AF points, Dual cross-type AF points, and Cross-type AF points vary depending on the lens used. * Dual cross-type focusing at f/2.8 with center AF point when Group A (of the AF groups) lenses are used.
Specifications Shooting mode: ISO speed (Recommended exposure index): ISO speed settings: Exposure compensation: AE lock: Flicker reduction: Interval timer: Bulb timer: Mirror lockup: Basic Zone modes: Scene Intelligent Auto, Creative Auto, Special Scene (Portrait, Group Photo, Landscape, Sports, Kids, Panning, Close-up, Food, Candlelight, Night Portrait, Handheld Night Scene, HDR Backlight Control) Creative Zone modes: Program AE, Shutter-priority AE, Aperture-priority AE, Manual exposure, Bulb expos
Specifications • Multiple Exposures Number of multiple 2 to 9 exposures exposures: Multiple-exposure control:Additive, average • Shutter Type: Shutter speed: Electronically-controlled, focal-plane shutter 1/4000 sec. to 30 sec. (total shutter speed range; available range varies by shooting mode), Bulb, X-sync at 1/180 sec. • Drive System Drive mode: Continuous shooting speed: Max.
Specifications * Based on Canon’s standard testing SD card (Standard: 8 GB, High-speed: 16 GB, UHS-I compatible) and standard testing conditions (High-speed continuous shooting, ISO 100, Standard Picture Style). * Figures in parentheses are the number of shots when a Canon’s standard testing UHS-I SD card is used.
Specifications • Movie Shooting Recording format: Movie: Audio: Movie recording size: Frame rate: Compression method: Bit rate: Card performance requirements: 574 MP4 * For time-lapse movies: MOV format MPEG-4 AVC/H.264 Variable (Average) bit rate * For 4K time-lapse movies: Motion JPEG AAC Full HD (1920x1080), HD (1280x720) * For time-lapse movies: 4K (3840x2160) and Full HD selectable 59.94p/29.97p/23.98p (with NTSC) 50.00p/25.
Specifications Focus method: AF method: Movie servo AF: Movie digital IS: Focusing brightness range: Metering mode: Metering brightness range: Exposure control: Exposure compensation: ISO speed (Recommended exposure index): [Time-lapse movie] (Reading speed) 4K Time-lapse movie (29.97p/25.00p) : UHS-I 90 MB/sec. or faster Full HD Time-lapse movie (29.97p/25.00p) : UHS-I Speed Class 3 or faster Dual pixel CMOS AF Face+Tracking, Smooth zone, Live 1-point AF Manual focusing (approx.
Specifications ISO speed settings: Sound recording: Grid display: HDR movie shooting: Time-lapse movie: Video snapshot: Remote control shooting: Still photo shooting: For movie shooting, you can set the ISO speed range, maximum limit for ISO Auto, and maximum limit for timelapse movie shooting with ISO Auto Built-in stereo microphones, external stereo microphone jack provided Sound-recording level adjustable, wind filter provided, attenuator provided 3 types Automatically set in SCN modes Movie recordi
Specifications Highlight alert: AF point display: Overexposed highlights blink Provided (may not be displayed depending on shooting conditions) Grid display: 3 types Magnified view: Approx. 1.
Specifications Geotag information Latitude, Longitude, Elevation, Coordinated Universal appended to image: Time (UTC), Satellite signal acquisition status Position update interval: 1 sec., 5 sec., 10 sec., 15 sec., 30 sec., 1 min., 2 min., 5 min. Time setting: GPS time data set to camera Log data: One file per day, NMEA format * Change in time zone creates another file. * The log data saved in internal memory can be transferred to a card or downloaded to a computer as a log file.
Specifications • Power Battery: Battery information: Number of possible shots: Movie shooting time: Battery Pack LP-E6N/LP-E6, quantity 1 * AC power usable with household power outlet accessories. Power source, Battery level, Shutter count, Recharge performance, Battery registration possible With viewfinder shooting: Approx. 1200 shots at room temperature (23°C/73°F), approx. 1100 shots at low temperatures (0°C/32°F) With Live View shooting: Approx. 380 shots at room temperature (23°C/73°F), approx.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Third party software This product includes third party software. expat.
Use of Genuine Canon Accessories Is Recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Digital Camera Model DS126631 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. For CA, USA only Included lithium battery contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
16 Software Start Guide / Downloading Images to a Computer This chapter describes about the EOS software, how to download and install the software, how to use the Software Instruction Manuals (PDF files), and how to transfer images to a computer.
Software Start Guide Software Overview You can download the following EOS software from the Canon Web site (p.596). You cannot install the EOS software to a computer without an Internet connection. EOS Utility With the camera connected to a computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer. You can also use this software to set various camera settings and shoot remotely from the computer connected to the camera.
Software Start Guide Map Utility Shooting locations can be displayed on a map on a computer screen by using the geotag location information recorded with GPS function. EOS MOVIE Utility This software enables you to play back the time-lapse movies you shot. You can also select time-lapse movie frames and save them as still photos (frame grab).
Software Start Guide Downloading and Installing the Software Do not connect the camera to a computer before you install the software. The software will not be installed correctly. Even if a previous version of the software is installed on your computer, follow the procedure below to install the latest version. (The previous version will be overwritten.) 1 Download the software. Connect to the Internet from a computer and access the following Canon Web site. X www.canon.
Software Start Guide Downloading the Software Instruction Manuals Software Instruction Manuals (PDF files) can be downloaded from the Canon Web site to your computer. Software Instruction Manual Download Site X www.canon.com/icpd To view the Instruction Manuals (PDF files), Adobe Acrobat Reader DC or other Adobe PDF viewer (most recent version recommended) is required. Adobe Acrobat Reader DC can be downloaded for free from the Internet.
Downloading Images to a Computer You can use EOS software to download images from the camera to a computer. There are two ways to do this. Downloading by Connecting the Camera to the Computer 1 Install the software (p.596). the interface cable (sold 2 Use separately) to connect the camera to the computer. Connect the cable to the camera’s digital terminal with the cable plug’s icon facing the front of the camera. Connect the cord’s plug to the computer’s USB terminal.
Downloading Images to a Computer Downloading Images with a Card Reader You can use a card reader to download images to a computer. 1 Install the software (p.596). the card into the card 2 Insert reader. Digital Photo Professional to 3 Use download the images. Refer to the Digital Photo Professional Instruction Manual (p.597). When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Index Numerics Acceleration/deceleration Area AF frame ................. 135, 140 Beeper ....................................... 73 Color tracking................... 142, 485 Cross-type focusing ................. 143 Difficult subjects for AF .... 153, 316 Direct AF point selection.......... 500 Dual cross-type focusing ......... 143 F8 AF ............................... 143, 144 Manual focusing............... 154, 321 Number of AF points ................ 145 Out of focus .................
Index Auto power off...........................47, 73 Auto reset......................................213 Auto time setting (GPS) ................227 Autofocus 9 AF Automatic selection (AF).......135, 140 C w/x (Custom shooting) ............ 510 C(Creative Auto) ........................ 100 Camera B (Bulb) .................................250, 326 Camera shake...................... 55, 96 Camera vibration blur......... 96, 265 Default settings .......................... 75 Holding the camera............
Index Contrast ................................181, 194 Downloading images to a Copyright information....................214 computer ...................................... 598 Creative Auto ................................100 DPOF Creative Zone modes .....................36 (Digital Print Order Format).......... 458 Cropping (images) ........................446 Dragging......................................... 68 Cross-type focusing ......................143 Drive mode..........................
Index Faithful (U) ...............................178 Flash mode................................... 283 FAT32......................................71, 345 Flash sync contacts ........................ 28 FE lock ..........................................278 Flash sync. speed in Av mode ..... 282 Feature guide..................................90 Focus indicator ....................... 94, 131 FEB Focus lock .............................. 97, 131 (Flash Exposure Bracketing).........
Index HDR shooting ...............................253 Help ................................................91 Text size .....................................92 High dynamic range 9 HDR High ISO speed noise reduction ...195 High-Definition ..............................341 Highlight alert................................397 Highlight tone priority ....................199 High-speed continuous shooting ..156 Histogram .............................293, 398 Hot shoe .................................
Index Jump display .................................400 K Kids ...............................................113 L Landscape ....................................111 Landscape (R)..........................177 Language ........................................52 Large (image-recording quality) ....164 Large Zone AF ......................135, 140 LCD monitor..............................27, 46 Adjusting angle .....................46, 99 Brightness.................................434 Electronic level .......
Index Medium (image-recording quality) ..............164 Memory cards 9 Cards Menu...............................................64 Dimmed menu items ..................66 My Menu...................................505 Setting procedure .......................65 Settings ....................................534 3 icon .........................................8 Metering mode..............................243 Metering timer.................56, 302, 377 MF (Manual focusing) ...........154, 321 Microadjustment ...
Index N Neutral (S) ...............................177 NFC connection ......................29, 540 Night Portrait .................................119 Noise reduction High ISO speed ........................195 Long exposures ........................197 Nomenclature..................................28 Non-Canon flash units ..................280 Normal (Image-recording quality) .162 NTSC ............................342, 427, 541 O ONE SHOT (One-Shot AF)...131, 306 One-Shot AF .........................
Index Remote control terminal..........28, 276 Remote controller .................271, 273 Remote switch ..............................276 Repeat (slide show) ......................424 Resizing ........................................444 Rotation (image) ...........................408 w/x (Custom shooting) ........ 510 C(Creative Auto) ................... 100 A (Scene Intelligent Auto)....... 94 P (Program AE) ....................... 234 8 (Special scene) ............... 107 Tv (Shutter-priority AE) .....
Index Standard (IPB) ..............................342 Standard (P).............................177 M icon..............................................8 Strap ...............................................38 Strength (Sharpness) ....................181 Subjects difficult to focus .............................153, 316, 374 V Vari-angle LCD monitor ............ 46, 99 Vertical image auto rotation.......... 435 Video snapshots ........................... 361 Video system................
The descriptions in this Instruction Manual are current as of March 2017. For information on the compatibility with any products introduced after this date, contact any Canon Service Center. For the latest version Instruction Manual, refer to the Canon Web site. CPH-E502-000 © CANON INC.