Owner's Manual

Using the Built-in Flash
FE (flash exposure) lock obtains and locks the correct flash exposure
reading for any part
of a subject.
1 Press the < ~ > button to pop-up
the built-in
flash~
• Press the shutter button halfway and
look
in the viewfinder to check that·
the < ~ > icon is lit.
Focus the subject.
Press the
<*> button. (816)
• Aim the viewfinder center over the
subject where
you want to lock the flash
exposure, then press the
<*> button.
~ The flash will fire a preflash and the
required flash output is calculated
and retained in memory.
~ In the viewfinder, "FELli is displayed
for a moment and
< ~ *> will light.
ED Each time you press the <*> button, a
preflash is fired and the required flash output
is calculated and retained in memory.
Take the picture.
• Compose the shot and press the
shutter button completely.
~ The flash is fired to take the picture.
4
08
0
CDc
o 0
102