Owner's Manual

amm Flash Control *
• E-TTL II
For normal flash exposures, set it to [Evaluative].
If [Average]
is set, the flash exposure will be averaged for the entire metered
scene as with an external metering flash. Flash exposure compensation may
be necessary depending on the scene, so this is for advanced users.
Select either [External flash func. setting] or [External flash C.Fn
setting]. For details on which external Speedlite settings the camera can
set,see the EX-series
(such as the 580EX II) Speedlite's instruction manual.
Attach the Speedlite to the camera and turn on the Speedlite.
1 Select either [External fla~h func.
setting]
or [External flash C.Fn
setting].
~. Turn the <0 > dial to select a setting,
. then press
< @l >.
• Settings which cannot be set will be
dimmed.
Set the external flash function
settings.
• Select a flash function and set it as
desired. The procedure is the same
as setting a menu function.
• On
the flash function settings screen,
the settable items, current settings,
flash mode setting, and flash Custom
Function settings might look different
on
your camera.
fD If you press the < INFO. > button to clear
the Speedlite settings, both the
external Speedlite and built-in flash
settings will be cleared.
External flash e.En setting[Jil;
Auto power off
O::::raD~en
1:0isab:ed
External flash C.Fn setting
External flash func.
setting 2
. .
104