Owner's Manual

t(Printing
4
Set the printing effects.
• Set as necessary.
• Turn the
<0> dial to select the item
on the upper right, then press
<8 >.
• If the < §J > icon is displayed next to
<1mmI>, the printing effects can also
be adjusted. (p.140)
• Next, turn the
<0 > dial to select the
desired printing effect, then press
<8>.
Item
Description
E$lOff
Same as the printing characteristics turned "On". No automatic
correction will be performed.
The image will be printed according to the printer's standard
E$lOn colors. The image's Exif data is used to make automatic
corrections.
E$lVivid
The image will be printed with higher saturation to produce
more vivid blues and greens.
E$lNR
The image noise is reduced before printing.
B/W 81W
Prints in black-'and-white with true blacks.
B/W Cool tone
Prints in black-and-white with cool, bluish blacks.
B/W Warm tone
Prints in black-and-white with warm, yellowish blacks.
QNatural
Prints the image in the actual colors and contrast. No automatic
color adjustments will be applied.
The printing characteristics are the same as the "Natural"
QNaturalM
setting. However, this setting enables finer printing adjustments
than with "Natural."
E$lDefault
The printing will differ depending on the printer. For details, see
the printer's instruction manual.
* The screen display may differ depending on the printer.
* When the printing effects are changed, the changes will be reflected on the
screen. However, the actual result
of the printing effects might look different
from what you see on screen. The screen only shows an approximate rendition.
This
also applies to [Brightness] and [Adjust levels] on page 140.
138