Owner's Manual

Troubleshooting Guide
«; The CF card is not properly inserted. (p.28)
«; Ifthe CF card is full, replace the card or delete unnecessary images to
make
rOom. (p.28,124)
«; If you try to focus in the One-Shot AFmode while the focus
confirmation light
<. > in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again
to focus, or focus
manually. (p.32; 80)
«; If dust is adhering to the LCD monitor, wipe with a lens cloth or soft
cloth.
@
In low or high temperatures, the LCD monitordisplay may seem slow
or it might look black. It will return to normal
at room temperature.
@ Set the lens focus mode switch
to <AF>. (p.30)
@
To prevent camera shake, hold the camera still and press the shutter
button gently. (p.32, 35)
@If a CFcard-related error message is displayed, see page 43 or 177.
«; The built-in flash's pop-up mechanism shakes slightly. This is normal.
175
I