Owner's Manual

Using the Built-in Flash
E-TTL II autoflash obtains high-precision and consistent flash shots.
If necessary,
the built-in flash will pop-up automatically in low-light
or backlit conditions. (except
in <~> <~> <5» modes)
Regardless
of the light level, you can press the < ~ > button to pop-up
and fire the built-in flash whenever desired. If the built-in flash has
popped up, you can push it back down with your fingers.
P : For fully automatic flash photography. The shutter speed
(1/ 60 sec. - 1/250 sec.) and aperture are set automatically.
Tv : Enables you to set the desired shutter speed (30 sec. -1/ I
250 sec.). The flash exposure will be set automatically to match
the aperture that was set automatically.
Av : Enables you to set the desired aperture. The flash exposure
will be set automatically to match the aperture that was set.
The
shutter speed will set automatically between 30 sec. - 1/250
sec.
to suit the scene's brightness.
In low light, the main subject is exposed with the automatic
flash, and the background is exposed with a slow shutter speed
set automatically. Both the subject and background look
properly exposed (automatic slow-speed flash sync).
• With slow shutter speeds, using a tripod is recommended.
• If you do not want to use a slow shutter speed, set
[.0. C.Fn I
-7] (Flash
sync. speed in Av mode) to [1 :1/250sec. (fixed)].
(p.155)
M :You can set both the shutter speed (bulb or 30 sec. -1/250
sec.) and aperture. The flash exposure will be"set automatically
to match the aperture that was set. The background exposure
will vary depending on the shutter speed and aperture.
A-DEP : The flash result will be the same as the < P > mode.
99