User Manual

242
Trouble?
Check the memory card
- Cannot access the memory card. Check the memory card and
make sure it is inserted correctly.
- A memory card error occurred. The camcorder cannot record on
or read from the memory card. Try removing and reinserting the
memory card, or use a different memory card.
-You inserted a MultiMedia Card (MMC) into the camcorder. Use a
recommended memory card (A 30).
- If after the message disappears, 9 appears in red, perform the
following: Turn off the camcorder and remove and reinsert the
memory card. If 8 turns back to green you can resume record-
ing/playback. If the problem persists, save your recordings
(A 141) and initialize the memory card (A 38).
Check whether the lens cover is open
- Slide the lens cover switch down.
File name error
- The folder and file numbers have reached their maximum value.
Save your recordings and set 1 > q> [F
ile Numbering] to
[Reset]. Then
, initialize the memory (A 38) or delete all movies
and photos (A 69).
Initialize only using the camcorder
-There is a problem with the file system that prevents accessing the
memory. Initialize the memory with this camcorder (A 38).
LCD Screen has been dimmed Use the [LCD Backlight] setting to
change the brightness
- Change the 1 > t > [LCD Backlight] setting to [Normal] or
[Bright].