User Manual

249
Trouble?
No access points found
- The access point set in the camcorder could not be found.
- To avoid interference, use the camcorder at some distance from
devices that emit electromagnetic waves (cordless phones, micro-
wave ovens, etc.).
-Make sure that you use the correct access point’s network name
(SSID) in the camcorder’s Wi-Fi settings (A 183).
- If the access point is using MAC address filtering, enter the cam-
corder’s MAC address in the access point’s configuration screen.
The access point is not compatible with UPnP
- An access point compatible with UPnP (Universal Plug and Play)
was not found in the connected network. You must use an access
point compatible with UPnP. If your access point is compatible,
make sur
e UPnP is acti
vated.
Unable to access configuration files
- Turn off the camcorder. After a short while, turn it on again. If the
problem persists contact a Canon Service Center.
Unable to complete WPS.
- Turn off the camcorder and access point. After a short while, turn
them on again and try again. If the problem persists, perform
setup using the [Search for Access Points] option (A 180).