User Manual

174
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
3
Switch to the destination time zone.
z Press the [ ][ ] buttons or turn the [ ]
dial to choose [ World], and then press
the [ ] button.
z [
] is now shown on [Time Zone] and
shooting screens (
=
204).
● Adjusting the date or time while in [ ] mode (
=
22) will
automatically update your [
Home] time and date.
Date and Time
Adjust the date and time as follows.
z Choose [Date/Time] on the [
2] tab, and
then press the [ ] button.
z Press the [
][ ] buttons to choose an
item, and then adjust the setting, either
by pressing the [ ][ ] buttons or turning
the [ ] dial.
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
the [ ] button in Shooting mode (
=
26). To have the lens retracted
immediately after you press the [
] button, set the retraction timing to
[0 sec.].
z Choose [Lens Retraction] on the [
2] tab,
and then choose [0 sec.].
World Clock
To ensure that your shots will have the correct local date and time when
you travel abroad, simply register the destination in advance and switch to
that time zone. This convenient feature eliminates the need to change the
Date/Time setting manually.
1
Specify your home time zone.
z Choose [Time Zone] on the [ 2] tab, and
then press the [ ] button.
z When conguring this setting for the rst
time, make sure [
Home] is selected,
and then press the [ ] button.
z Press the [
][ ] buttons to choose your
home time zone.
z To set daylight saving time (1 hour
ahead), choose [
] by pressing the
[ ][ ] buttons or turning the [ ] dial,
and then choose [ ] by pressing the
[ ][ ] buttons.
z Press the [
] button.
2
Specify your destination.
z Press the [ ][ ] buttons or turn the [ ]
dial to choose [ World], and then press
the [ ] button.
z Press the [
][ ] buttons to choose the
destination.
z If necessary, specify daylight saving time
as in step 1.
z Press the [
] button.