User Manual

36
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
2) Shoot.
z Press the shutter button all the way
down.
z As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the ash, it res
automatically.
z Keep the camera still until the shutter
sound ends.
z After displaying your shot, the camera will
revert to the shooting screen.
Recording Movies
1) Start recording.
z Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
z Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
z Frames displayed around any detected
faces indicate that they are in focus.
z Once recording begins, take your nger
off the movie button.
(
1
)
3
Zoom in or out, as needed.
z To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle). (A zoom
bar (1) showing the zoom position is
displayed, along with the range of focus
(2).)
4
Shoot.
Shooting Still Images
1) Focus.
z Press the shutter button halfway. The
camera beeps twice after focusing, and
frames are displayed to indicate image
areas in focus.
z If [Raise the ash] is displayed, lift the
ash with your ngers. It will re when
shooting. If you prefer not to use the
ash, push it down with your nger, into
the camera.
(
1
)
(
2
)