Owner's Manual

122 | Reference: Connector-specific configuration information
Fax Format settings are available for the eCopy connector for Fax via SMTP only.
TABLE 35. LDAP/SMTP Properties: User Logon tab
Section Field Description
Logon Send from a generic account Sends the user at the device directly to the Send screen
without displaying the Logon screen. If you select this option
you must specify a generic e-mail address or select the User
modify option, or select both.
If you do not want to use the LDAP Address Book, you must
select this option.
Generic e-mail A generic e-mail address that is used as the sender account
for all e-mail.
User modify The user at the device can modify the sender’s e-mail address.
LDAP Requires the user at the device to enter the user name and
password specified for the LDAP server.
Windows domain Enables users at the device to use their Windows logon
information, via the SAMAccountName attribute, to log on.
The Domain field specifies the Windows domain name. This is
required if you select the Windows option.
Available only if you select Active Directory as the server type.
Novell The Novell tree. This is required if you select the Novell
option.
Available only if you select eDirectory as the server type.
TABLE 36. LDAP/SMTP Properties: Fax Format Settings
Section Field Name Description
Fax Address Format Cover Page /
No Cover page
Displays the fax format that you define in the Fax Address Format
window.
Format Opens the Fax Address Format window where you define the fax
address format required by your fax server application or Internet fax
service.
Refer to the documentation for your fax application to obtain the
correct format for the fax address.
Since fax application vendors change these formatting schemes
frequently, make certain you obtain the current format.