User guide
Flash with Other Modes
When you want to control both
the sync speed and the aper
ture, use manual exposure. Set
the desired aperture and shutter
speed. The E-TTL autoflash
control system regulates the
flash output according to the
aperture you set for optimum
flash exposure.
Set the camera to M
(Manual) and set the
desired aperture and sync
speed anywhere from 30
sec. up to the camera max
imum sync speed.
Make sure that the pilot
lamp is lit.
Press the shutter button
halfway to focus on the
subject.
0
Use of the buLb setting for the sync speed is applicable for flash photog
raphy with manual exposure.
SC ^.G-*11
Check that V is displayed
in the viewfinder. Then,
press the shutter button
completely to take the pic
ture.
19