Owner's Manual

3-5

Chapter 3 ScanFront Setup

3. Configuring the Scanner Settings

The scanner setup consists of configuring the initial network settings from the [Administrator setting] screen, and then configuring

the settings needed to use the scanner as described in Chapter 4 “Web Menu (Administrator Mode)”.

❏ Administrator Settings

The following items are available for administrator settings. For details, see “Configuring Administrator Settings” on p. 3-8.

Hint

Except for the scanner maintenance items (roller counter reset, touch panel adjustment, and initialization), the administrator setting items

can be configured from the Web Menu (Administrator Mode). For details, see “Web Menu (Administrator Mode)” on p. 3-6 or Chapter 4 “Web

Menu (Administrator Mode)”.

Setting Item Description Administrator setting

Web Menu

(Administrator Mode)

Network settings

Set the Device Name and IP Address needed to

connect to the network.

Yes Yes

Change administrator

password

Set the password required for logging in to

[Administrator setting] and the Web Menu.

Yes Yes

Backup / Restore all

settings

Back up or restore the scanner settings. Yes Yes

Roller Counter Reset Reset the counter after replacing the feed roller. Yes No

Format ScanFront 220

Use to delete all of the current settings, such as

when changing the operating environment of the

scanner.

Yes No

Touch panel adjustment

Adjust the touch panel when it does not operate as

expected.

Yes No

Display language setting Set the language displayed on the touch panel. Yes Yes