User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Scan Settings
- Basic Operations
- Copying
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
● Set <Time Zone> befor
e setting the current date and time. If the <Time Zone> setting is changed, the
current date and time are also changed accordingly.
● The curr
ent date and time cannot be changed for 1 hour after daylight saving time is in effect.
<Time Zone>
*
Select the time zone. If the time zone setting is changed, the values set in <Current Date/Time Settings> are also
changed accor
dingly.
Setting the Date/Time(P. 9)
<(UTC-12:00) International Date Line West> to <(UTC-05:00) Eastern Time (US & Canada)> to <(UTC
+14:00) Kiritimati Island>
UTC
● Coor
dinated Universal Time (UTC) is the primary time standard by which the world regulates clocks
and time. The correct UTC time zone setting is required for Internet communications.
<Daylight Saving Time Settings>
Enable or disable daylight saving time. If daylight saving time is enabled, specify the dates from which and to
which daylight saving time is in effect. Setting the Date/Time(P. 9)
<Off>
<On>
Start: Month, W
eek, Day
End: Month, Week, Day
<Auto Sleep Time>
If the machine has not been oper
ated or has had no data to process for a specied period of time, the machine enters
sleep mode to save energy consumption (Auto Sleep). Specify the period of time after which auto sleep is performed.
Auto Sleep is not performed when the setting menu is displayed. We recommend using the factory default settings to
save the most power.
Entering Sleep Mode(P. 103)
1 to 30 (min.)
Setting Menu List
228