User's Manual

Table Of Contents

If a key is not pressed for a specied period of time, the scr

een and the settings are initialized to display the

default screen (Auto Reset). Specify the interval at which the Auto Reset is performed. The Auto Reset is not

performed in the following cases:

● The setting menu is displayed.

● The machine is processing data, such as when printing documents.

● An error message is displayed and the [Error] indicator is blinking (However, Auto Reset is performed when the

error does not prevent the user from continuing to use a function.)

0 (Auto Reset is disabled.)

1 to 2

to 9 (min.)

<Menu> <Timer Settings> <Auto Reset Time> Specify the Auto Reset time

● The scr

een displayed after the Auto Reset is performed can be selected in <Function After Auto Reset>.

Select whether to r

eturn the display to the default screen after the Auto Reset is performed. If <Default Function> is

selected, the main screen of the function selected in <Default Screen after Startup/Restoration> is displayed (

<Default Screen after Startup/Restoration>(P. 223) ). If <Selected Function> is selected, the display r

eturns to the

main screen of the function that was selected.

<Menu> <Timer Settings> <Function After Auto Reset> Select <Default Function> or

If scan is not performed within a specied period of time after the scr

een below is displayed (the machine is set online

for scanning), the machine automatically becomes oine. Specify the time period at which the machine becomes

oine. You can also set the machine to remain online.

Setting Menu List

229