User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Scan Settings
- Basic Operations
- Copying
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
<Adjustment/Maintenance>
22EJ-09K
All the settings r
elated to adjustment and maintenance are listed with descriptions. Default settings are marked with a
dagger (
).
<Displ. Timing for Cartridge Prep. Notif.> (P. 236)
<Toner Save>(P. 236)
<Special Processing>(P. 236)
<Clean Fixing Assembly> (P. 240)
<Displ. Timing for Cartridge Prep. Notif.>
Set the display timing for the message notifying you that the amount r
emaining in the toner cartridges or the drum
cartridges is low.
<Toner Cartridge>
<Drum Cartridge>
<Menu> <Adjustment/Maintenance> <Displ. Timing for Cartridge Prep. Notif.> Select <Toner
Cartridge> or <Drum Cartridge> Enter the cartridge level
<Toner Save>
Select whether to r
educe toner consumption when copying.
<Copy>
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Toner Save> <Copy> <On>
● Fine lines and portions with lighter print density may be blurr
ed when you set this to <On>.
<Special Processing>
If the print r
esults on special types of paper are not satisfactory, the following settings may improve the quality of the
printouts.
Setting Menu List
236