User Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Logging in to the Machine
- Placing Originals
- Loading Paper
- Loading Paper in the Paper Drawer
- Loading Paper in the Multi-Purpose Tray
- Loading Envelopes
- Loading Preprinted Paper
- Specifying Paper Size and Type
- Specifying Paper Size and Type in the Paper Drawer
- Specifying Paper Size and Type in the Multi-Purpose Tray
- Registering Default Paper Settings for the Multi-Purpose Tray
- Registering a Custom Paper Size
- Limiting the Paper Sizes Displayed
- Automatically Selecting an Appropriate Paper Source for Each Function
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Sleep Mode
- Registering Destinations
- Using a USB Memory Device
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Increasing the Security of Documents
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Loading Paper in the Paper Drawer
3JX3-02W
1660-02Y
Load the paper that you usually use in the paper dr
awer. When you want to print on paper that is not loaded in the
paper drawer, load the paper in the multi-purpose tray.
Loading Paper in the Multi-Purpose Tray(P. 144)
Loading Regular Size Paper(P. 139)
Loading Custom Size Paper(P. 141)
● When using A5 size paper, see Loading Regular Size Paper(P. 139) and load it in the landscape
orientation. When loading paper in the portr
ait orientation, follow the steps shown in
Loading Custom
Size Paper
(P. 141) .
● When using A6 size paper, see
Loading Custom Size Paper(P. 141) and load it in the portr
ait orientation.
Landscape orientation
Portrait orientation
● Follo
w the procedure below when loading paper into the optional paper feeder.
Loading Regular Size Paper
T
o load paper whose size is found in the paper size markings on the paper drawer, use the following procedure. For
paper whose size is not found in the paper size markings, see
Loading Custom Size Paper(P. 141) .
1
Pull out the paper drawer until it stops, and remove it while lifting the front side.
2
Adjust the positions of the paper guides to the paper size you want to use.
Basic Operations
139