User's Manual

23
Selecting and Printing Images (Basic
Printing)
Select images on a memory card and print them as follows.
1 Insert the memory card into the
slot.
 Insert the memory card facing as shown
until it clicks into place.
 To remove the card, push it in until it
clicks, and then slowly release it.
 The [Select & Print] image selection
screen is displayed.
2 Choose an image.
 Press the <l><r> buttons to select an
image to print.
3 Choose the number of prints.
 Press the <u><d> buttons to specify
the number of prints.
 To print other images at the same time,
repeat steps 2 – 3.
 Press the <o> button. The [Preview]
screen is displayed. To adjust the settings
displayed, press the <n> button and
change the settings on the [Print settings]
screen (=
39).
4 Print.
 Press the <p> button to start printing.
 While printing, paper passes in and out
of the back of SELPHY several times.
Do not touch the paper until printing is
nished and the print is ejected onto the
paper cassette.
 Do not allow 19 or more prints to collect in
the ejection area on the paper cassette.
Label side