User's Manual

75
Charging the Battery Pack before Use
 Once SELPHY is plugged in (= 20), charging starts, and [ ] blinks
on the screen.
 After charging is nished in about four hours (at room temperature),
[
] is no longer displayed.
 SELPHY can be used even while [ ] is blinking, by turning it on
(=
20). However, charging stops. When SELPHY is turned off,
[
] starts blinking again and charging resumes.
• For battery precautions, refer to the battery user manual.
• When [
] is displayed, before charging, make sure SELPHY is in an
environment at operating temperature (= 78) and has adjusted to the
ambient temperature.
• When [
] is displayed in red, the battery pack has reached the end of its
useful life. Purchase a new battery pack.
• [
] display can be cleared by holding down any button other than the <q>
button for at least 3 seconds. [ ] is displayed for about 10 seconds if you
press any button other than <q> while the screen is off and the battery pack is
charging.