User Manual

ManualsBrandsCanon ManualsDigital Cine CamerasEOS C100 Mark II with Dual Pixel CMOS AF & EF 24-105mm f/4L IS II USM Zoom Lens Kit

Preparing the Camcorder

Using the OLED Panel

1 Pull the OLED panel 180 degrees to the left.

• The OLED panel can be pulled to the left 270 degrees so that

the screen can be viewed from the side.

2 Push the OLED panel up or down to adjust it to the

desired angle of view.

NOTES

• If you are not using the viewfinder during a long recording, we

recommend turning it off.

• While recording with the OLED panel facing toward the subject,

you can set [£ OLED/VF Setup] > [OLED Mirror Image] to

[On] to flip the image horizontally so subjects can see a mirror

image of themselves.

• To set the screen to black & white, use the [£ OLED/VF

Setup] > [OLED/VF B&W] setting. If you set an assignable

button to [OLED/VF B&W] (A 107), you can press the button

to turn the black & white display on and off. When the screen is

black & white, the onscreen displays will still be in color.

• When you use a commercially available lens adapter and the

image on the screen is inverted, you can use the [w Other

Functions] > [Custom Function] > [Scan Reverse Rec] setting

to return the image to the correct orientation.

• About the OLED and viewfinder screens: The screens are

produced using extremely high-precision manufacturing

techniques, with more than 99.99% of the pixels operating to

specification. Less than 0.01% of the pixels may occasionally

misfire. On the viewfinder screen only, pixels may also light up

as white dots. This has no effect on the recorded image and

does not constitute a malfunction.

Adjusting the Viewfinder/OLED Screen

You can adjust the brightness, contrast, color and sharpness of the

viewfinder and OLED screen independently of each other. Additionally,

you can turn on the increased luminence of the OLED panel or adjust the

backlight of the viewfinder. These adjustments will not affect your

recordings.

1 Open the setup menu for the viewfinder or OLED screen.

[£ OLED/VF Setup] > [OLED Setup] or [Viewfinder Setup]

2 Select [Brightness], [Contrast], [Color], [Sharpness], [Luminance] or

[Backlight] and then press the joystick.

3 Adjust the setting and then press the joystick.

• Repeat steps 2 and 3 to adjust other settings as necessary.

Operating modes:

* [OLED Setup] only

**[Viewfinder Setup] only

[£ OLED/VF Setup]

[OLED Setup]

[Viewfinder Setup]

[Brightness: ±0]

[Contrast: ±0]

[Color: ±0]

[Sharpness: 2]

[Luminance: Off]*

[Backlight: Normal]**