User Manual

Recording Video

Onscreen Displays

Refer to this section for an explanation of the various screen displays that appear in mode. You can use

the custom display function (

A 122) to turn off individual onscreen displays if they are not required. In the

following table, the "Custom Display" column indicates whether the icon can be turned off through [£ OLED/

VF Setup] > [Custom Display 1] or [Custom Display 2] (indicated by "1:" or "2:", respectively) and the name of

the custom display submenu name.

When displaying the date and time (

A 172):

Number Icon/Display Description Custom Display A

1 è  é  ê 

ë  ì (in red)

000 min

Remaining battery charge

The icon shows an estimate of the remaining charge. When using a

battery pack compatible with Intelligent System, the remaining time is

displayed, in minutes, next to the icon.

•When ì is displayed, replace the battery pack with a fully

charged one.

• Depending on the conditions of use, the actual battery charge may

not be indicated accurately.

[Remaining Battery]

–

2 SD card status and available recording time estimate 2:

[Remaining Rec Time]

–

200 min, 300 min Can record on SD card

The SD card selected for recording is indicated with a Ð mark.

4, 5 (in red) No SD card or cannot record on the SD card.

3 400 min Remaining recording time for double slot recording (A 43): in green -

can record; in yellow - the SD card is almost full; in red - cannot record.

4CONT 00:00:00 Recording time for continuous recording (A 99)

4 00 mm Current focal length of an attached EF lens.

• The displayed value is an estimate.

1: [Focal Length] –

5 b (in yellow/red), ` Temperature warning/Fan operation.

• When the camcorder’s internal temperature is high, b will appear in

yellow. If the temperature rises further due to continued use, it will

change to red and the fan may be activated automatically.

2: [Temperature/Fan] 52

1312 14 15 16 17

30 3529 3332 3427