User Manual

Adjusting the Focus
74
One-Shot AF
When an EF lens (except for manual focus lenses) is attached to the
camcorder, you can use the one-shot AF function during manual
focus to have the camcorder focus automatically only once on the
subject at the center of the screen.
1 Set the focus mode switch on the lens to AF in advance.
• When using a compatible EF Cinema lens, enable automatic
adjustment on the lens (A 71).
• [AF] will appear on the left of the screen.
• By default, the AF mode is set to one-shot AF. If it has been
changed, continue to step 2. If it is already set to one-shot AF,
skip to step 4.
2 Open the AF [Mode] submenu.
[~ Camera Setup] > [AF] > [Mode]
3 Select [One Shot] and then press the joystick.
4 Press and hold the ONE-SHOT AF button.
• The AF frame will appear at the center of the screen and the
camcorder will focus automatically. When you are using Face
AF, a white detection frame will appear around the face of the
person who has been determined to be the main subject.
• When correct focus has been achieved, the AF frame turns green.
• If the camcorder cannot focus automatically, the AF frame will turn red.
• The AF frame will disappear when you release the ONE-SHOT AF button.
NOTES
• One-shot AF will not work in the following cases.
- When the shutter speed mode is set to [Slow] and the shutter speed is set to 1/4 or 1/3.
- When Face AF is set to [Face Only] and a face has not been detected.
• When the aperture value used is F11 or higher, Dual Pixel CMOS AF will not work and the camera will focus
using contrast-detection autofocus.
Continuous AF
When an EF lens (except for manual focus lenses) is attached to the camcorder, you can have the camcorder
focus automatically.
1 Set the focus mode switch on the lens to AF in advance.
• When using a compatible EF Cinema lens, enable automatic
adjustment on the lens (A 71).
• [AF] will appear on the left of the screen.
2 Open the AF [Mode] submenu.
[~ Camera Setup] > [AF] > [Mode]
3 Select [Continuous] and then press the joystick.
• A white frame will appear in the center of the screen.
[~ Camera Setup]
[AF]
[Mode]
[One Shot]
[~ Camera Setup]
[AF]
[Mode]
[One Shot]