User Manual

Recording Audio
86
3 Plug the microphone cable into the desired XLR terminal (햵) or the MIC terminal (햶).
Switching to the Built-in Microphone or External
Microphone (MIC Terminal)
To use the built-in microphone, make sure to attach the handle unit in
advance.
Set the CH1/CH2 AUDIO IN switch to INT.
• Audio can be recorded using the built-in microphone or a
microphone connected to the MIC terminal.
• If you connect a microphone to the MIC terminal while the AUDIO IN
switch is set to INT, the camcorder will switch automatically from the
built-in microphone to the external microphone.
Adjusting the Audio Level for the Built-in Microphone
and an External Microphone (MIC Terminal)
You can adjust the audio recording level of the built-in microphone or a microphone attached to the MIC terminal
to auto or manual. The way to adjust the audio level depends on whether the handle unit is attached to the
camcorder.
Microphone lock screw
Microphone
cable clamp
XLR terminals
MIC terminal
CH1/CH2
AUDIO IN switches