Owner's Manual

81
C Creative Auto Shooting
(3) Drive mode: Use the <6> dial to make the selection. You can also
select it from a list by pressing <0>.
<u> Single shooting:
Shoot one image at a time.
<i> Continuous shooting:
While you hold down the shutter button completely, shots will
be taken continuously. You can shoot up to approx. 5.0 shots
per second.
<m> <Q> Self-timer: 10 sec./remote control
(when Wireless Remote Control BR-E1 (sold separately) is
used):
The picture is taken 10 seconds after you press the shutter
button. Remote control shooting using the BR-E1 is also
possible.
<l> Self-timer: 2 sec.:
The picture is taken 2 seconds after you press the shutter
button.
<q> Self-timer: Continuous:
Press the <W> <X> keys to set the number of multiple shots
(2 to 10) to be taken with the self-timer. 10 seconds after you
press the shutter button, the set number of multiple shots are
taken.
(4) Built-in flash firing: Turn the <6> dial to select the desired
setting. You can also select it from a list by pressing <0>.
<a> Auto built-in flash: The flash fires automatically as
necessary.
<D> Built-in flash on : The flash fires at all times.
<b> Built-in flash off : The flash is disabled.
When using the self-timer, see the notes on page 126.
For remote control shooting, see page 382.
When the camera is paired with BR-E1, <m> will change into <Q>
(p.384).
When using <b>, see “Shooting When You Cannot Use Flash” on page
77.