User Manual

Table Of Contents
H Using Eye-Fi Cards
388
5
Check the [Access point SSID:].
Check that an access point is
displayed for [Access point SSID:].
You can also check the Eye-Fi card’s
MAC address and firmware version.
Press the <M> button to exit the
menu.
6
Take the picture.
X The picture is transferred and the
<H> icon switches from gray (not
connected) to one of the icons in the
sequence below.
For transferred images, O is
displayed in the shooting information
(p.349).
H (Gray) Not connected : No connection with access point.
H (Blinking) Connecting...: Connecting to access point.
H (
Illuminated
) Connected: Connection to access point established.
H () Transferring... :
Image transfer to access point in progress.
Transmission status icon