Instruction Manual Instruction manuals (PDF files) and software can be downloaded from the Canon Web site (p.4, 445). www.canon.
Introduction The EOS REBEL SL2 or EOS 200D is a digital single-lens reflex camera featuring a fine-detail CMOS sensor with approx. 24.2 effective megapixels, DIGIC 7, high-precision and high-speed 9-point AF, maximum continuous shooting speed of approx. 5.0 shots/sec., Live View shooting, Full High-Definition (Full HD) movie shooting, and Wi-Fi/ NFC/Bluetooth (wireless communication) function.
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Camera (with eyecup and body cap) Strap Battery Pack LP-E17 Battery Charger LC-E17/LC-E17E* (with protective cover) * Battery Charger LC-E17 or LC-E17E is provided. (The LC-E17E comes with a power cord.) The camera does not come with the Software CD-ROM, an interface cable or HDMI cable. The Instruction Manuals are listed on the next page.
Instruction Manuals Camera and Wi-Fi (Wireless Communication) Function Basic Instruction Manual The booklet is the Basic Instruction Manual. More detailed Instruction Manuals (PDF files) can be downloaded from the Canon Web site. Downloading and Viewing the Instruction Manuals (PDF Files) 1 Download the Instruction Manuals (PDF files). Connect to the Internet and access the following Canon Web site. www.canon.com/icpd Select your country or region of residence and download the Instruction Manuals.
Instruction Manuals The Instruction Manuals (PDF files) can also be downloaded using the QR code. www.canon.com/icpd A software application is required to read the QR code. Select your country or region of residence, then download the Instruction Manuals. The QR code can also be displayed under [54: Manual/software URL].
Quick Start Guide 1 Insert the battery (p.38). 2 Insert the card (p.38). 3 Upon purchase, charge the battery to start using (p.36). With the card’s label facing toward the back of the camera, insert it into the card slot. White index Red index Attach the lens (p.48). Align the lens’s white or red mount index with the camera’s mount index of the same color to attach the lens. 4 Set the lens’s focus mode switch to (p.48).
Quick Start Guide 6 Flip out the LCD monitor (p.41). 7 Focus on the subject (p.51). 8 Take the picture (p.51). 9 Review the picture. When the LCD monitor displays the date/time/zone setting screen, see page 44. Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus on the subject. The built-in flash will be raised as necessary. Press the shutter button completely to take the picture.
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (p.68). SD/SDHC*/SDXC* memory cards * UHS-I cards supported. Cards that Can Record Movies When shooting movies, use a large-capacity card with a writing/reading speed class at least as high as shown in the following table. Movie Recording Size (p.
Chapters Introduction 1 2 3 4 5 6 7 8 9 10 11 12 13 14 2 Getting Started and Basic Camera Operations 35 Basic Shooting and Image Playback 71 Setting the AF and Drive Modes 113 Image Settings 127 Advanced Operations for Photographic Effects 161 Flash Photography 181 Shooting with the LCD Monitor (Live View Shooting) 195 Shooting Movies 233 Handy Features 281 Image Playback 309 Post-Processing Images 355 Customizing the Camera 363 Reference 379 Software Start Guide / Downloading I
Contents by Purpose Shooting Shoot automatically Î p.71-109 (Basic Zone modes) Shoot continuously Î p.123 (i Continuous shooting) Take a picture of yourself in a group Î p.125 (j Self-timer) Freeze the action Blur the action Î p.164 (s Shutter-priority AE) Blur the background Î p.78 (C Creative Auto) Keep the background in sharp focus p.166 (f Aperture-priority AE) Adjust the image brightness (exposure) Î p.174 (Exposure compensation) Shoot in low light Î p.72, 182 (D Flash photography) p.
Image Quality Shoot with image effects matching the subject Î p.135 (Picture Style) Make a large-size print of the picture Î p.128 (73, 83, 1) Take a lot of pictures Î p.128 (7a, 8a, b) AF (Focusing) Change the point of focus Î p.119 (S AF point selection) Shoot a moving subject Î p.90, 91, 116 (AI Servo AF) Playback View the images on the camera Î p.110 (x Playback) Search for pictures quickly Î p.310 (H Index display) p.311 (I Image browsing) Rate images Î p.
Index to Features Power Battery • Charging • Installing/Removing • Battery level • Checking battery information Recording Images Î p.36 Î p.38 Î p.43 Î p.380 Creating/Selecting a folder Î p.290 File numbering Î p.292 AF AF operation Î p.114 Household power outlet Î p.381 AF point selection Î p.119 Auto power off Manual focusing Î p.122 Î p.42 Cards Drive Installing/Removing Î p.38 Drive mode Î p.123 Formatting Î p.68 Continuous shooting Î p.123 Self-timer Î p.
Index to Features Shooting Movie Shooting Shooting mode Î p.30 Movie shooting Î p.233 ISO speed Î p.132 AF method Î p.214 Bulb Î p.171 Movie recording size Î p.245 Metering mode Î p.172 Movie Servo AF Î p.273 Mirror lockup Î p.179 Sound recording Î p.271 Remote control Î p.382 Manual exposure Î p.238 Exposure Adjustment Digital zoom Î p.248 HDR movie shooting Î p.249 Exposure compensation Î p.174 Creative filters for movies Î p.250 Exposure compensation with M+ISO Auto Î p.
Index to Features Image Editing Creative filters Î p.356 Resizing Î p.359 Cropping Î p.361 Customization Custom Functions (C.Fn) Î p.364 My Menu Î p.373 Software Software Start Guide Î p.444 Software Instruction Manual Î p.
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. : Indicate up, down, left, and right on the cross keys respectively. <0> : Indicates the Setting button. 0/9/7/8 : Indicates that each function remains active for approx. 4 sec., 6 sec., 10 sec., or 16 sec. after you let go of the button.
Contents Introduction 2 Item Check List................................................................................. 3 Instruction Manuals .......................................................................... 4 Quick Start Guide ............................................................................. 6 Compatible Cards............................................................................. 8 Chapters........................................................................................
Contents 2 Basic Shooting and Image Playback 71 A Fully Automatic Shooting (Scene Intelligent Auto) ...................72 A Full Auto Techniques (Scene Intelligent Auto)..........................75 7 Shooting When You Cannot Use Flash ....................................77 C Creative Auto Shooting.............................................................78 8: Special Scene Mode .............................................................85 2 Shooting Portraits .......................................
Contents 4 Image Settings 127 Setting the Image-Recording Quality ........................................... 128 g: Setting the ISO Speed for Still Photos ................................. 132 A Selecting a Picture Style ...................................................... 135 A Customizing a Picture Style ................................................. 138 A Registering a Picture Style ................................................... 141 B: Matching the Light Source (White balance) ............
Contents 7 Shooting with the LCD Monitor (Live View Shooting) 195 A Shooting with the LCD Monitor ............................................... 196 Shooting Function Settings ...........................................................203 U Shooting with Creative Filter Effects ....................................... 205 Menu Function Settings ................................................................ 209 Changing the Autofocus Operation (AF operation).......................
Contents Setting the Auto Power Off Time ............................................... 288 Adjusting the LCD Monitor Brightness....................................... 289 Creating and Selecting a Folder ................................................ 290 File Numbering Methods............................................................ 292 Setting the Copyright Information .............................................. 295 Setting the Auto Rotation of Vertical Images .............................
Contents 11 Post-Processing Images 355 U Applying Creative Filter Effects ............................................... 356 S Resizing JPEG Images ...........................................................359 N Cropping JPEG Images...........................................................361 12 Customizing the Camera 363 Setting Custom Functions............................................................. 364 Custom Function Setting Items.....................................................
Safety Precautions The following precautions are provided to prevent harm or injury to yourself and others. Make sure to thoroughly understand and follow these precautions before using the product. If you experience any malfunctions, problems, or damage to the product, contact the nearest Canon Service Center or the dealer from whom you purchased the product. Warnings: Follow the warnings below. Otherwise, death or serious injuries may result.
Safety Precautions When the camera or accessories are not in use, make sure to remove the battery, and disconnect the power plug and connecting cables from the equipment before storing. This is to prevent electrical shock, excessive heat, fire, and corrosion. Do not use the equipment where there is flammable gas. This is to prevent an explosion or a fire. If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the exposed internal parts.
Safety Precautions Cautions: Follow the cautions below. Otherwise, physical injury or property damage may result. Do not use or store the product in a high-temperature location such as inside a car under the hot sun. The product may become hot and cause burns. Doing so may also cause battery leakage or explosion, which will degrade the performance or shorten the life of the product. Do not carry the camera around when it is attached to a tripod. Doing so may cause an injury or an accident.
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung wet cloth.
Handling Precautions If condensation forms on the camera, do not use the camera. This is to avoid damaging the camera. If there is condensation, remove the lens, card and battery from the camera, and wait until condensation has evaporated before using the camera. If the camera will not be used for an extended period, remove the battery and store the camera in a cool, dry, well-ventilated location.
Handling Precautions Cards To protect the card and its recorded data, note the following: Do not drop, bend, or wet the card. Do not subject it to excessive force, physical shock, or vibration. Do not touch the card’s electronic contacts with your fingers or anything metallic. Do not affix any stickers, etc. on the card. Do not store or use the card near anything that has a strong magnetic field, such as a TV set, speakers, or magnets. Also avoid places prone to having static electricity.
Nomenclature Built-in flash/AF-assist beam emitter (p.182/117) EF lens mount index (p.48) EF-S lens mount index (p.48) Flash sync contacts Mode Dial (p.30) Hot shoe (p.187) Power switch (p.42) Flash button (p.182) ISO speed setting button (p.132) Wi-Fi lamp Display button (p.70) Wi-Fi button <6> Main Dial Speaker (p.326) Focal plane mark (p.92) Shutter button (p.51) Strap mount (p.35) Built-in microphones (p.234) Red-eye reduction/ Self-timer lamp (p.
Nomenclature HDMI mini OUT terminal (p.333) Digital terminal (p.447) Live View shooting/ Movie shooting button (p.196/234) Dioptric adjustment knob (p.50) AE lock/ FE lock button/ Index/Reduce button (p.178/185/310/313) Viewfinder eyepiece Eyecup (p.386) AF point selection/ Magnify button (p.119/313) Info button (p.110, 199, 240) Menu button (p.60) LCD monitor/ Touch screen (p.60, 288/65, 314, 328) Access lamp (p.40) DC cord hole (p.
Nomenclature Mode Dial The Mode Dial includes the Basic Zone modes and Creative Zone modes. Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting. A : Scene Intelligent Auto (p.72) 7 : Flash Off (p.77) C : Creative Auto (p.78) 8: Special scene (p.85) 2 Portrait (p.87) P q Group Photo (p.88) x Candlelight (p.94) Food (p.93) 3 Landscape (p.89) 6 Night Portrait (p.95) 5 Sports (p.90) F Handheld Night Scene (p.96) C Kids (p.
Nomenclature Creative Zone These modes give you more control for shooting various subjects as desired. d s f a : Program AE (p.162) : Shutter-priority AE (p.164) : Aperture-priority AE (p.166) : Manual exposure (p.
Nomenclature Quick Control Screen (Example in the mode with [s: Shooting screen: Standard] set (p.58)) Shutter speed Exposure level indicator Exposure compensation amount (p.174) AEB range (p.176) Aperture z Main Dial pointer Auto Lighting Optimizer (p.149) ISO speed (p.132) Shooting mode Highlight tone priority (p.367) Picture Style (p.135) Flash exposure compensation (p.184) Metering mode (p.172) AF operation (p.114) Manual focus (p.122, 228) Image-recording quality (p.
Nomenclature Viewfinder Information Display Spot metering circle (p.172) Focusing screen <•> AF point activation indicator AF point (p.119) Warning icon (p.369) ISO speed indicator (p.132) AE lock (p.178) AEB in-progress (p.176) Flash-ready (p.182, 187) Improper FE lock warning High-speed sync (p.193) FE lock (p.185) / FEB in-progress Flash exposure compensation (p.184) Shutter speed (p.
Nomenclature Battery Charger LC-E17 Charger for Battery Pack LP-E17 (p.36). Power plug Charge lamp Full-charge lamp Battery pack slot IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. Battery Charger LC-E17E Charger for Battery Pack LP-E17 (p.36).
1 Getting Started and Basic Camera Operations This chapter describes preparatory steps before you start shooting and the basic camera operations. Attaching the Provided Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is also attached to the strap (p.386).
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E17 the battery. 3 Recharge For LC-E17 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Charge the battery before use. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. After recharging the battery, detach it and disconnect the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery and Card Load a fully charged Battery Pack LP-E17 into the camera. The camera can use an SD, SDHC, or SDXC memory card (sold separately). UHS-I Speed Class SDHC and SDXC memory cards can also be used. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing/erasing. Installing the Battery and Card 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery.
Installing and Removing the Battery and Card After opening the card slot/battery compartment cover, be careful not to swing it back any further. Otherwise, the hinge may break. The number of possible shots varies depending on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [z1: Release shutter without card] to [Disable] will prevent you from forgetting to insert a card before shooting (p.287). Removing the Battery and Card the power switch to <2> 1 Set (p.42).
Installing and Removing the Battery and Card When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot/battery compartment cover. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera. • Removing the card. • Removing the battery. • Shaking or banging the camera around.
Using the LCD Monitor After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, or play back photos and movies. You can change the direction and angle of the LCD monitor. 1 Flip out the LCD monitor. the LCD monitor. 2 Rotate When the LCD monitor is swung out, 180° 90° 175° you can rotate it up, down, or over 180° to face the subject. The indicated angle is only approximate. it toward you. 3 Face Normally, use the camera with the LCD monitor facing you.
Turning on the Power If you turn on the power switch and the date/time/zone setting screen appears, see page 44 to set the date/time/zone. : The camera turns on. You can shoot movies (p.234). <1> : The camera turns on. You can shoot still photos. <2> : The camera is turned off and does not function. Set the power switch to this position when not using the camera. Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, sensor cleaning will be performed automatically.
Turning on the Power z Battery Level Indicator When the power is turned on, the battery level will be indicated in one of the four levels. z : Battery level is sufficient. x : Battery level is low, but the camera can still be used. c : Battery will be exhausted soon. (Blinks) n : Recharge the battery. Number of Possible Shots with Viewfinder Shooting (Approx.
3 Setting the Date, Time, and Zone When you turn on the power for the first time or if the date/time/zone have been reset, the date/time/zone setting screen will appear. Follow the steps below to set the time zone first. Set the camera to the time zone in which you currently live so that, when you travel, you can simply change the setting to the correct time zone for your destination, and the camera will automatically adjust the date/time.
3 Setting the Date, Time, and Zone Press <0> again. Press the keys to select the time zone, then press <0>. If your desired time zone is not listed, press the button, then proceed to the next step to set it (with the time difference from the Coordinated Universal Time, UTC). To set the time difference from UTC, press the keys to select a parameter (+/-/hour/minute) for [Time difference]. Press <0> so is displayed. Press the keys to set it, then press <0>. (Returns to .
3 Setting the Date, Time, and Zone saving time. 5 SetSettheit asdaylight necessary. Press the keys to select [Y]. Press <0> so is displayed. Press the keys to select [Z], then press <0>. When the daylight saving time is set to [Z], the time set in step 4 will advance by 1 hour. If [Y] is set, the daylight saving time will be canceled and the time will go back by 1 hour. the setting. 6 ExitPress the keys to select [OK], then press <0>.
3 Selecting the Interface Language 1 Display the main tabs. Press the button to display the main tabs. the [52] tab, select 2 Under [LanguageK]. Press the keys to select the [5] tab, then press <0>. Press the keys to select the [52] tab. Press the keys to select the [LanguageK], then press <0>. the desired language. 3 SetPress the keys to select the language, then press <0>. X The interface language will change.
Attaching and Detaching a Lens The camera is compatible with all Canon EF and EF-S lenses. Note that you cannot use the EF-M lenses. Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’s red or white index White index with the camera’s index matching the same color. Turn the lens as shown by the arrow until it clicks in place. Red index the lens’s focus mode switch 3 Set to .
Attaching and Detaching a Lens Zooming Turn the zoom ring on the lens with your fingers. Perform the zoom operation before focusing. Turning the zoom ring after achieving focus may throw off the focus. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens. Doing so may cause loss of vision.
Basic Shooting Operations Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the AF points in the viewfinder look sharp. If the knob is difficult to turn, remove the eyecup (p.386). If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using E-series Dioptric Adjustment Lenses (sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake.
Basic Shooting Operations Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder (0). While you press the shutter button halfway, the LCD monitor will turn off (p.301).
3 Setting the Screen Display Level You can set how information is displayed on the screen according to your preference. Change the settings as necessary. 1 Display the main tabs. Press the button to display the main tabs. the [s] tab. 2 Select Press the keys of the cross keys to select the [s] tab, then press <0>. Shooting Screen You can select [Standard] or [Guided] (friendly display) for the Quick Control screen in viewfinder shooting. By default, it is set to [Guided].
3 Setting the Screen Display Level Sample Screens : Guided : Standard : Guided : Standard In Creative Zone modes, when [Guided] is set, only the functions particular to the set shooting mode are displayed on the Quick Control screen. Note that items that cannot be set from the Quick Control screen when [Guided] is selected can be set via the menu screen (p.61).
3 Setting the Screen Display Level Menu Display You can select the display type from [Standard] or [Guided]. If you set [Guided], main tab descriptions are provided when you press the button. If you set [Standard], you proceed directly to the menu screen when you press the button. By default, it is set to [Guided]. 1 Select [Menu display]. 2 Select the display type. Main tabs When [Guided] is set, the [9 (My Menu)] tab does not appear. To set My Menu (p.
3 Setting the Screen Display Level Shooting Mode Guide You can display the description of the shooting mode (mode guide) when switching the shooting mode during viewfinder shooting. By default, it is set to [Enable]. 1 Select [Mode guide]. 2 Select [Enable]. the Mode Dial. 3 Turn X A description of the selected shooting mode will appear. the key. 4 Press X The rest of the description will appear. When you press <0>, the description will disappear and the Quick Control screen will appear.
3 Setting the Screen Display Level Feature Guide When using Quick Control or setting menu items, you can display a brief description of functions and options (feature guide). By default, it is set to [Enable]. 1 Select [Feature guide]. 2 Select [Enable]. Sample Screens Quick Control screen Menu screen Feature guide The description will disappear when you tap on it or proceed with the operation.
3 Setting the Screen Display Level Shooting Tips Shooting tips appear when [Shooting screen] is set to [Guided] (p.52) and the camera settings result in any of the following conditions. In Basic Zone modes, shooting tips appear regardless of the [Shooting screen] setting. • You want to blur the background further (by setting the lowest aperture value in the mode). • The image is likely to be overexposed. • The image is likely to be underexposed.
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor with intuitive operations. This is called Quick Control. 1 Press the button (7). X The Quick Control screen will appear. the desired functions. 2 SetPress the cross keys to select a function. X The settings of the selected function and Feature guide (p.56) will appear. Turn the <6> dial to change the setting. Basic Zone modes Creative Zone modes the picture.
Q Quick Control for Shooting Functions Sample Quick Control Screen When [s: Shooting screen: Guided] is Set Aperture (p.166) Exposure compensation (p.174) AF operation (p.114) Return Drive mode (p.123) AF point selection (p.119) When [s: Shooting screen: Standard] is Set Aperture (p.166) White balance bracketing (p.148) Shutter speed (p.164) Shooting mode* (p.30) Highlight tone priority* (p.367) Exposure compensation/ AEB setting (p.174/176) ISO speed (p.132) Flash exposure compensation (p.
3 Menu Operations and Configurations You can configure various settings with the menus such as the imagerecording quality, date/time, etc. button <0> button LCD monitor cross keys Menu Screen The menu tabs and items displayed vary depending on the shooting mode.
3 Menu Operations and Configurations Menu Setting Procedure When [s: Menu display: Guided] is Set Main tabs 1 Display the main tabs. When you press the button, the main tabs and a description of the selected tab will appear. a main tab. 2 Select Each time you press the keys of the cross keys, the main tab (group of functions) will switch. the menu screen. 3 Display Press <0> to display the menu screen. To return to the main tab screen, press the button. a secondary tab.
3 Menu Operations and Configurations the setting. 6 Select Press the or keys of the cross keys to select the desired setting. (Some settings are selected with the and keys, and others are selected with the and keys.) The current setting is indicated in blue. the setting. 7 SetPress <0> to set it. X If you change the setting from the default, it will be indicated in blue (available only for the menu items under the [z] tab). the setting.
3 Menu Operations and Configurations When [s: Menu display: Standard] is Set Main tabs 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Turn the <6> dial or press the keys to select the main tab and secondary tab. For example, in this manual, the [z4] tab refers to the screen displayed when the z (Shooting) tab’s [4] is selected. The subsequent operations are the same as those for [s: Menu display: Guided].
3 Menu Operations and Configurations Dimmed Menu Items Example: When [Multi Shot Noise Reduction] is set Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <0>. If you cancel the overriding function’s setting, the dimmed menu item will become settable. You may not be able to see the overriding function for certain dimmed menu items.
d Operating the Camera with Touch Screen You can operate the camera by tapping on the LCD monitor (touchsensitive panel) with your fingers. Tap Sample Screen (Quick Control) Use your finger to tap on (touch briefly and then remove your finger from) the LCD monitor. By tapping, you can select menus, icons, etc. displayed on the LCD monitor. For example, when you tap on [ ], the Quick Control screen appears. By tapping on [Q], you can return to the preceding screen.
d Operating the Camera with Touch Screen Drag Sample Screen (Menu screen) Slide your finger while touching the LCD monitor.
d Operating the Camera with Touch Screen 3 Setting the Touch Control Response 1 Select [Touch control]. Under the [53] tab, select [Touch control], then press <0>. the touch control response 2 Set setting. Select the desired setting, then press <0>. [Standard] is the normal setting. [Sensitive] provides a more reactive touch screen response than [Standard]. Try using both settings and select the one you prefer. To disable touch operations, select [Disable].
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc. before formatting the card. 1 Select [Format card]. Under the [51] tab, select [Format card], then press <0>. the card.
3 Formatting the Card Perform [Format card] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed (p.427). Low-level Formatting Perform low-level formatting if the card’s writing or reading speed seems slow or if you want to totally erase the data on the card.
Switching the LCD Monitor Display The LCD monitor can display the Quick Control screen, menu screen, captured images, etc. When you turn on the power, the Quick Control screen will appear. You can then check the current shooting function settings. When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on. You can also turn off the display by pressing the button. Press the button again to turn on the display.
2 Basic Shooting and Image Playback This chapter describes how to use the Basic Zone modes on the Mode Dial for best results and how to play back images. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically (p.107, 390). Also, because advanced shooting function settings cannot be changed, you can enjoy shooting photographs without worrying about botched pictures due to misoperation.
A Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject (p.75). 1 AF point Set the Mode Dial to . AF point over the subject. 2 AimAllthe the AF points will be used to focus, and the camera will normally focus on the closest object.
A Fully Automatic Shooting (Scene Intelligent Auto) the picture. 4 TakePress the shutter button completely to take the picture. X The captured image will be displayed for approx. 2 sec. on the LCD monitor. When you finish shooting, push down the built-in flash with your fingers. The mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
A Fully Automatic Shooting (Scene Intelligent Auto) The beeper continues to beep softly. (The focus indicator does not light up.) It indicates that the camera is focusing continuously on a moving subject. (The focus indicator does not light up.) You can take sharp pictures of a moving subject. Note that focus lock (p.75) will not work in this case. Pressing the shutter button halfway does not focus on the subject.
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. In the mode, pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock”.
A Full Auto Techniques (Scene Intelligent Auto) A Live View Shooting You can shoot while viewing the image on the LCD monitor. This is called “Live View shooting”. For details, see page 195. 1 Display the Live View image on the LCD monitor. Press the button. X The Live View image will appear on the LCD monitor. on the subject. 2 Focus Press the shutter button halfway to focus. X When focus is achieved, the AF point will turn green and the beeper will sound. the picture.
7 Shooting When You Cannot Use Flash The camera analyzes the scene and sets the optimum settings automatically. In places where flash photography is prohibited such as in a museum or an aquarium, use the <7> (Flash Off) mode. Shooting Tips Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
C Creative Auto Shooting is a fully-automatic shooting mode that is a step more advanced from . You can adjust the photo’s ambience, background blur, etc. before shooting. By pressing the button, you can set 1. Ambience-based shots, 2. Background blur setting, 3. Drive mode, and 4. Built-in flash firing with Quick Control. * stands for Creative Auto. 1 Set the Mode Dial to . the button (7). 2 Press X The Quick Control screen will appear. the desired functions.
C Creative Auto Shooting Shutter speed Aperture ISO speed (1) (2) (4) (3) Battery level Possible shots Image-recording quality If you set (1) or (2) when the camera is set for Live View shooting, you can see the effect on the screen before you start shooting. (1) Ambience-based shots You can select and shoot with the ambience you want to convey in your images. Turn the <6> dial to select the ambience. You can also select it from a list by pressing <0>. For details, see page 82.
C Creative Auto Shooting (2) Background blur • If [OFF] is set, the degree of background blur will change depending on the brightness. • If it is set to any setting other than [OFF], you can adjust the background blur regardless of the brightness. • The further you move the cursor to the right with the <6> dial, the sharper the background will look in the picture. • The further you move the cursor to the left with the <6> dial, the more blurred the background around the subject will be.
C Creative Auto Shooting (3) Drive mode: Use the <6> dial to make the selection. You can also select it from a list by pressing <0>. Single shooting: Shoot one image at a time. Continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approx. 5.0 shots per second. Self-timer: 10 sec.
C Creative Auto Shooting Shooting with Ambience Selection Ambience Ambience Effect 1 Ambience: Standard No setting 2 Vivid Low / Standard / Strong 3 Soft Low / Standard / Strong 4 Warm Low / Standard / Strong 5 Intense Low / Standard / Strong 6 Cool Low / Standard / Strong 7 Brighter Low / Medium / High 8 Darker Low / Medium / High 9 Monochrome Blue / B/W / Sepia 1 Display the Live View image. Press the button to display the Live View image.
C Creative Auto Shooting the ambience effect. 3 SetPress the keys to select the effect so that [Effect] appears at the bottom of the screen. Press the keys to select the desired effect. the picture. 4 TakePress the shutter button completely to take the picture. To return to viewfinder shooting, press the button to exit Live View shooting. Then press the shutter button completely to take the picture.
C Creative Auto Shooting Ambience Settings 1Ambience: Standard This provides standard image characteristics. 2 Vivid The subject looks crisp, sharp and vivid. Effective for making the picture look more impressive than with [1 Ambience: Standard]. 3 Soft The subject is less defined, giving the picture a softer and daintier look. Good for portraits, pets, flowers, etc. 4 Warm The subject is less defined with a warmer color cast, giving the picture a warmer and gentler look.
8: Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. * <8> stands for Special Scene. 1 Set the Mode Dial to <8>. 2 Press the button. a shooting mode. 3 Select Press the keys to select the desired shooting mode, then press <0>. You can also select by turning the <6> dial.
8: Special Scene Mode Available Shooting Modes in the <8> Mode Shooting Mode Page Shooting Mode Page 2 Portrait p.87 P Food p.93 q Group Photo p.88 x Candlelight p.94 3 Landscape p.89 6 Night Portrait p.95 5 Sports p.90 F Handheld Night Scene p.96 C Kids p.91 G HDR Backlight Control p.97 4 Close-up p.
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. アテ Shooting Tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
q Shooting Group Photos Use the (Group Photo) mode to shoot group photos. You can take a picture in which both the people in the front and people in the back are all in focus. Shooting Tips Use a wide-angle lens. When using a zoom lens, use the wide-angle end to make it easy to get all the people in the group in focus at once, from the front row to the back.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus. It also adds breadth to landscapes. Shooting night scenes. The <3> mode is also good for night scenes because it disables the built-in flash.
5 Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips Use a telephoto lens. Use of a telephoto lens is recommended for shooting from a distance. Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink.
C Photographing Children When you want to continuously focus on and photograph children running around, use (Kids). Skin tones will look healthy. Shooting Tips Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink. Shoot continuously. The default setting is (Continuous shooting).
4 Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject. Check the lens for its minimum focusing distance. Some lenses have indications such as <0.25m/0.8ft> on them.
P Shooting Food When shooting food, use
(Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips Change the color tone. You can change [Color tone]. To increase the food’s reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red. Avoid using flash. If you use flash, the light may reflect off the dish or food and results in unnatural shadows.
x Shooting Candlelight Portraits When you want to photograph a human subject lit in candlelight, use (Candlelight). The atmosphere of candlelight is reflected in the color tones of the picture. Shooting Tips Use the center AF point to focus. Aim the center AF point in the viewfinder over the subject, then shoot. Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
6 Shooting Night Portraits (With a Tripod) When you want to photograph people at night and obtain a naturallooking night scene in the background, use the <6> (Night Portrait) mode. Using a tripod is recommended. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, since camera shake is prone to occur with handheld shooting, use a tripod. Check the subject’s brightness.
F Shooting Night Scenes (Handheld) Using a tripod when shooting a night scene gives the best results. However, the (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. In this shooting mode, four shots are taken consecutively for each picture, and the resulting one image with reduced camera shake is recorded. Shooting Tips Hold the camera firmly. During shooting, hold the camera firmly and steadily.
G Shooting Backlit Scenes When shooting a scene having both the bright and dark areas, use the (HDR Backlight Control) mode. When you take one picture in this mode, three consecutive shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting. Shooting Tips Hold the camera firmly. During shooting, hold the camera firmly and steadily. In this mode, three shots are aligned and merged into a single image.
Cautions for Group Photo Since distortion correction is applied, the camera records an image area narrower than the one seen through the viewfinder. (The image periphery is slightly trimmed and the resolution looks slightly lowered.) Also, during Live View shooting, the angle of view changes slightly. Cautions for Kids During Live View shooting, if flash is fired in continuous shooting, the continuous shooting speed will decrease.
Cautions for Handheld Night Scene and HDR Backlight Control You cannot select 1+73 or 1. If 1+73 or 1 is set, the image will be recorded in 73 quality. If you shoot a moving subject, the subject’s movement may leave afterimages, or the surrounding area of the subject may become dark. The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.), flat or single-tone images, or images significantly misaligned due to camera shake.
v Shooting with Creative Filter Effects In the (Creative filter) mode, you can apply one of ten filter effects (Grainy B/W*, Soft focus*, Fish-eye effect*, Water painting effect*, Toy camera effect*, Miniature effect*, HDR art standard, HDR art vivid, HDR art bold, and HDR art embossed) for shooting. When the camera is set for Live View shooting, you can see the effect on the screen before you start shooting. The camera saves only the image with the Creative filter effects applied.
v Shooting with Creative Filter Effects a shooting mode. 4 Select Press the keys to select a shooting mode, then press <0>. X The image will be displayed with the effects of the filter applied. Available Shooting Modes in the v Mode Shooting Mode Page G Grainy B/W p.102 c Shooting Mode Page Miniature effect p.103 W Soft focus p.102 A HDR art standard p.103 X Fish-eye effect p.102 B HDR art vivid p.103 Z Water painting effect p.103 C HDR art bold p.
v Shooting with Creative Filter Effects You cannot select 1+73 or 1. If 1+73 or 1 is set, the image will be recorded in 73 quality. When , , , , , or is set, continuous shooting cannot be set. Dust Delete Data (p.304) will not be appended to images shot with Fisheye effect applied. is set to (Flash Off) by default. Try to prevent camera shake when shooting in low-light conditions.
v Shooting with Creative Filter Effects Z Water painting effect Makes the photo look like a watercolor painting with soft colors. You can control the color density by adjusting the filter effect. Note that night scenes or dark scenes may not be rendered with a smooth gradation and may look irregular or have significant noise. H Toy camera effect Darkens the photo’s corners and applies a unique color tone that makes it look as if it was shot by a toy camera.
v Shooting with Creative Filter Effects C HDR art bold The colors are the most saturated, making the subject pop out, and the picture looks like an oil painting. D HDR art embossed The color saturation, brightness, contrast and gradation are decreased to make the picture look flat. The picture looks faded and old. The subject outlines will have bolder bright (or dark) edges.
v Shooting with Creative Filter Effects Adjusting Miniature Effect 1 Move the AF point. Move the AF point to where you want to focus on. X If the AF point is not fully covered by the miniature effect frame, the [r] icon on the bottom right of the screen will blink. In the next step, adjust the position of the miniature effect frame so that it covers the AF point. the miniature effect frame. 2 Move Press the button (or tap on the [r] icon at the bottom right of the screen).
Q Quick Control In Basic Zone modes, pressing the button sets the camera to the Quick Control state and enables you to set the items shown in the tables on pages 107-108. Example: the Mode Dial to a Basic Zone 1 Set mode. the button (7). 2 Press X The Quick Control screen will appear. the desired functions. 3 SetPress the cross keys to select a function. (This procedure is not necessary in the 7 mode.) X The settings of the selected function and Feature guide (p.56) will appear.
Q Quick Control Settable Functions in Basic Zone Modes o: Default setting* k: User selectable Drive mode (p.123) 8 q 3 o o k k 5 k o k k k k k k k k k k o k k k k k k o k k k k o k k k k k k o o k k k k G A 7 C u: Single shooting o k o k m/Q: Self-timer: 10 sec./ remote control k l: 2sec.
Q Quick Control o: Default setting* k: User selectable G o W o m/Q: Self-timer: 10 sec./ remote control k k k k k l: 2sec. k k o k k k k k o k k k k k o k k k k k o k k k k k o k k k c o A o k v B o k C o k D o k m/Q: Self-timer: 10 sec./ remote control k k k k k l: 2sec. k k k k o k k k k k k k k o o o o Function u: Single shooting Drive mode (p.123) a: Automatic firing D: Flash on (Fires at all times) b: Flash off Adjustment of effects (p.
Adjusting the Brightness In Basic Zone modes, when a mode other than , <7>, , <8: G>, or is set, you can adjust the brightness for shooting. You can adjust both the brightness and darkness across 3-step ranges with 0 being the standard. 1 Set the Mode Dial to <8: 2q35C4Px6F>. Set to any mode other than . the Live View image. 2 Display Press the button to display the Live View image (except ). Quick Control, select the 3 With desired brightness. Press the button (7).
x Image Playback The easiest way to play back images is described below. For more details on the playback procedure, see page 309. 1 Play back the image. Press the button. X The last image captured or played back will appear. an image. 2 Select To play back images starting with the last image captured, press the key. To play back images starting with the first captured image, press the key. Each time you press the button, the display will change.
x Image Playback the image playback. 3 ExitPress the button to exit the image playback and return to shooting-ready state. Shooting Information Display With the shooting information screen displayed (p.110), you can press the keys to change the shooting information displayed at the screen bottom as follows. For details, see pages 350-351.
3 Setting the AF and Drive Modes The AF points in the viewfinder are arranged to make AF shooting suitable for a wide variety of subjects and scenes. You can also select the AF operation and drive mode that best match the shooting conditions and subject. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (p.31). In Basic Zone modes, the AF operation is set automatically. stands for autofocus. stands for manual focus.
f: Changing the Autofocus OperationN You can select the AF (autofocus) operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1 Set the lens focus mode switch to . the Mode Dial to a Creative 2 Turn Zone mode. [AF operation]. 3 Select Under the [z1] tab, select [AF operation], then press <0>. X [AF operation] will appear. the AF operation.
f: Changing the Autofocus OperationN One-Shot AF for Still Subjects AF point Focus indicator Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. The dot inside the AF point achieving focus lights up briefly in red, and the focus indicator in the viewfinder will also light up. With evaluative metering, the exposure setting will be set at the same time focus is achieved. While you keep holding down the shutter button halfway, the focus will be locked.
f: Changing the Autofocus OperationN AI Servo AF for Moving Subjects This AF operation is suited for moving subjects when the focusing distance keeps changing. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. The exposure is set at the moment the picture is taken. When the AF point selection (p.119) is automatic, the camera first uses the center AF point to focus.
f: Changing the Autofocus OperationN AF-Assist Beam with the Built-in Flash Under low-light conditions, when you press the shutter button halfway, the built-in flash may fire a brief burst of flashes. This illuminates the subject to help autofocusing. AF-assist beam will not be emitted from the built-in flash in <7> <8: 5C> modes. AF-assist beam will not be emitted from the built-in flash when [Built-in flash firing] is set to in , , <8: 2q4PF>, or mode.
f: Changing the Autofocus OperationN 3 Setting Lens Electronic MF With the following USM and STM lenses equipped with electronic manual focusing function, you can set whether to use electronic manual focusing in One-Shot AF mode. The default setting is [Disable after One-Shot AF]. EF-S18-135mm f/3.5-5.6 IS USM EF300mm f/2.8L USM EF1200mm f/5.6L USM EF50mm f/1.0L USM EF400mm f/2.8L USM EF28-80mm f/2.8-4L USM EF85mm f/1.2L USM EF400mm f/2.8L II USM EF70-300mm f/4-5.6 IS II USM EF85mm f/1.
S Selecting the AF Point When <8: x> or mode is set, since the camera automatically focuses on the closest subject in normal cases, it may not always focus on your desired subject. In any other mode, you can select one AF point to focus solely on the subject that AF point is aimed over. 1 Press the button (9). X The selected AF point will be displayed on the LCD monitor and in the viewfinder. the AF point. 2 Select Use the cross keys to select the AF point.
S Selecting the AF Point Shooting Tips When shooting a portrait up close, use One-Shot AF and focus on the eyes. If you set the composition after focusing on the eyes of the person to be photographed, the vivid facial expression will stand out more in the picture. If it is difficult to focus, select the center AF point. The center AF point has the highest focusing performance among the nine AF points.
Subjects Difficult to Focus on Autofocus may fail to achieve focus (focus indicator in the viewfinder blinks) with special subjects such as the following: Subjects with very low contrast (Example: Blue skies, solid-color flat surfaces, etc.) Subjects in very low light Strongly backlit or reflective subjects (Example: Cars with highly reflective bodies, etc.) Near and distant subjects positioned close to an AF point (Example: Animals in cages, etc.
Subjects Difficult to Focus on MF: Manual Focus the lens’s focus mode switch 1 Set to . on the subject. 2 Focus Focus by turning the lens focusing Focusing ring ring until the subject looks sharp in the viewfinder. If you press the shutter button halfway and focus manually, the AF point achieving focus will light up briefly in red, and the focus indicator will light up in the viewfinder.
i Selecting the Drive Mode Single and continuous drive modes are provided. 1 Press the button. X The Quick Control screen will appear. [ ]. 2 Select Press the keys to select [ ], then press <0>. the drive mode. 3 Select Press the keys to select the desired drive mode, then press <0>. u : Single shooting When you press the shutter button completely, only one shot will be taken. i : Continuous shooting (Max. approx. 5.0 shots/sec.
i Selecting the Drive Mode m/Q: 10-sec. self-timer/remote control (when Wireless Remote Control BR-E1 (sold separately) is used) l : 2-sec. self-timer q : Self-timer: Continuous For self-timer shooting, see page 125. For remote control shooting with the BR-E1, see page 382. i: The approx. 5.0 shots/sec. maximum high-speed continuous shooting speed is achieved under the following conditions*: 1/500 sec.
j Using the Self-timer 1 Press the button. X The Quick Control screen will appear. [ ]. 2 Select Press the keys to select [ 3 ], then press <0>. Select the self-timer. Press the keys to select the self-timer, then press <0>. m/Q: 10 sec./remote control self-timer Remote control shooting with the Wireless Remote Control BR-E1 (sold separately) is also possible (p.382). l: 2-sec. self-timer (p.81) q: 10-sec.
j Using the Self-timer With , the interval between the multiple shots may be prolonged depending on the shooting functions settings such as the imagerecording quality or flash. If you do not look through the viewfinder when you press the shutter button, attach the eyepiece cover (p.386). If stray light enters the viewfinder when the picture is taken, it may throw off the exposure. After taking self-timer shots, playing back the image (p.110) to check focus and exposure is recommended.
4 Image Settings This chapter describes image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, noise reduction, lens aberration correction, and other functions. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (p.31).
3 Setting the Image-Recording Quality You can select the pixel count and its image quality. Nine imagerecording quality settings are provided: 73, 83, 74, 84, 7a, 8a, b, 1+73, 1. 1 Select the image-recording quality. Under the [z1] tab, select [Image quality], then press <0>. X [Image quality] will appear. Pixels recorded (pixel count) Possible shots the image-recording quality.
3 Setting the Image-Recording Quality Guide to Image-recording Quality Settings Image Quality 73 83 High quality 74 Medium 84 quality JPEG 7a 8a b Low quality Pixels Recorded 24M 11M 5.9M 3.8M File Size (MB) (Approx.) Possible Shots Maximum Burst 7.6 950 Full (Full) 3.9 1840 Full (Full) 4.1 1790 Full (Full) 2.0 3480 Full (Full) 2.6 2730 Full (Full) 1.3 5260 Full (Full) 1.8 3810 Full (Full) 29.4+7.6 170 6 (6) High 24M quality 1 29.
3 Setting the Image-Recording Quality FAQ I want to select the image-recording quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If A2 (59.4x42 cm/23.4x16.5 in.) you want to crop the image, selecting a 73 higher quality (more pixels) such as 73, A3 (42x29.7 cm/ 83 83, 1+73, or 1 is recommended. 1+73 16.5x11.7 in.) 74 1 b is suitable for playing back the image 84 with a digital photo frame. 7a b 8a A4 (29.7x21 cm/11.7x8.
3 Setting the Image-Recording Quality 1 1 is the raw image data before it is made into 73 or other images. 1 images cannot be viewed on a computer without the use of software, such as Digital Photo Professional (EOS software, p.444). However, you can perform various adjustments on them that are impossible with other image types such as 73. 1 is effective when you want to precisely adjust the image yourself or shoot an important subject. 1+73 1+73 records a 1 image and a 73 image with a single shot.
g: Setting the ISO Speed for Still PhotosN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically. Regarding the ISO speed during movie shooting, see pages 236 and 239. 1 Press the button (9). the ISO speed. 2 SetWhile looking in the viewfinder or at the LCD monitor, press the keys or turn the <6> dial to select the desired ISO speed, then press <0>. ISO speed can be set within ISO 100 ISO 25600.
g: Setting the ISO Speed for Still PhotosN Under [54: Custom Functions (C.Fn)], if [4: Highlight tone priority] is set to [1:Enable], ISO 100 and “H” (equivalent to ISO 51200) cannot be selected (p.367). Shooting in high temperatures may result in images that look grainier. Long exposures can also cause irregular colors in the image. When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable.
g: Setting the ISO Speed for Still PhotosN 3 Setting the Maximum ISO Speed for [AUTO]N For ISO Auto, you can set the maximum ISO speed limit within ISO 400 - ISO 25600. Under the [z2] tab, select [zISO Auto], then press <0>. Select the ISO speed, then press <0>.
A Selecting a Picture StyleN Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. 1 Select [Picture Style]. Under the [z4] tab, select [Picture Style], then press <0>. X The Picture Style selection screen will appear. a Picture Style. 2 Select Select a Picture Style, then press <0>. X The Picture Style will be set.
A Selecting a Picture StyleN Q Portrait For nice skin tones. The image looks softer. Suited for close-up portraits. By changing the [Color tone] (p.139), you can adjust the skin tone. R Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes. u Fine Detail Suited for detailed outline and fine texture description of the subject. The colors will be slightly vivid. S Neutral Geared for users who prefer to process images with their computer.
A Selecting a Picture StyleN Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other parameters. The numerals indicate the values for these parameters set for the respective Picture Style.
A Customizing a Picture StyleN You can customize the Picture Styles. You can change or adjust the parameter settings of Picture Styles such as [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other parameters from the default settings. To see the resulting effects, take test shots. To customize [Monochrome], see page 140. 1 Select [Picture Style]. Under the [z4] tab, select [Picture Style], then press <0>. X The Picture Style selection screen will appear. a Picture Style.
A Customizing a Picture StyleN Parameter Settings and Effects Sharpness g J Strength 0: Weak outline emphasis K Fineness*1 1: Fine 7: Strong outline emphasis 5: Grainy L Threshold*2 1: Low 5: High +4: High contrast h Contrast -4: Low contrast i Saturation -4: Low saturation +4: High saturation j Color tone -4: Reddish skin tone +4: Yellowish skin tone *1: Indicates the fineness of the outlines to be emphasized. The smaller the number, the finer the outlines that can be emphasized.
A Customizing a Picture StyleN V Monochrome Adjustment Besides the effects described on the preceding page such as [Contrast], or [Strength], [Fineness] and [Threshold] for [Sharpness], you can also set [Filter effect] and [Toning effect]. kFilter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more than the original. Filter Sample Effects N: None Normal black-and-white image with no filter effects.
A Registering a Picture StyleN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. Useful when you want to preset multiple Picture Styles with different settings. You can also adjust the parameters of a Picture Style that is registered to the camera with EOS Utility (EOS software, p.444) here. 1 Select [Picture Style]. Under the [z4] tab, select [Picture Style], then press <0>.
A Registering a Picture StyleN a parameter. 5 Select Select the parameter (such as [Strength] of [Sharpness]) to be set, then press <0>. the parameter. 6 SetPress the keys to adjust the effect of the parameter, then press <0>. For details, see “Customizing a Picture Style” (p.138-140). Press the button to register the adjusted parameter settings. The Picture Style selection screen will then reappear. X The base Picture Style will be indicated on the right of [User Def. *].
B: Matching the Light SourceN White balance (WB) is for making the white areas look white. Normally, the Auto [Q] (Ambience priority) or [Qw] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. In Basic Zone modes, [Q] (Ambience priority) is set automatically. (In the
mode, [Qw] (White priority) is set.) 1 Select [White balance].
B: Matching the Light SourceN Q Auto White Balance With [Q] (Ambience priority), you can increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [Qw] (White priority), you can reduce the intensity of the image’s warm color cast. If you want to match the Auto white balance of previous EOS DIGITAL camera models, select [Q] (Ambience priority). 1 Select [White balance]. Under the [z3] tab, select [White balance], then press <0>.
B: Matching the Light SourceN O Custom White Balance With custom white balance, you can set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. 1 Shoot a white object. Look through the viewfinder and aim the entire dotted line box (shown in the illustration) over a plain, white object. Focus manually and shoot with the standard exposure set for the white object.
B: Matching the Light SourceN [O (Custom)]. 4 Select Under the [z3] tab, select [White balance], then press <0>. Select [O (Custom)], then press <0>. If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. In step 3, the following images cannot be selected: Images captured with the Picture Style set to [Monochrome] (p.
u Adjusting the Color Tone for the Light SourceN You can correct the white balance that is set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This function is for advanced users, particularly for those users who understand the use of color temperature conversion and color compensating filters and their effects. White Balance Correction 1 Select [WB Shift/Bkt.
u Adjusting the Color Tone for the Light SourceN White Balance Auto Bracketing With just one shot, three images with different color tones can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias and magenta/green bias. This function is called white balance bracketing (WB Bkt.). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
3 Auto Correction of Brightness and ContrastN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured. In Basic Zone modes, [Standard] is set automatically. 1 Select [Auto Lighting Optimizer]. Under the [z3] tab, select [Auto Lighting Optimizer], then press <0>. the setting.
3 Setting Noise ReductionN High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. Change the setting to match the noise level. 1 Select [High ISO speed NR]. Under the [z4] tab, select [High ISO speed NR], then press <0>. the level.
3 Setting Noise ReductionN When [Multi Shot Noise Reduction] is Set If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. If you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
3 Setting Noise ReductionN the desired setting. 2 SetSelect the desired setting, then press <0>. [Auto] For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective enough in most cases. [Enable] Noise reduction is performed for all exposures of 1 sec. or longer. The [Enable] setting may reduce noise that cannot be detected with the [Auto] setting. picture.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Peripheral light fall-off is a phenomenon that makes the image corners look darker due to the optical characteristics of the lens. Color fringing along subject outlines is called chromatic aberration. Image distortion due to optical characteristics of the lens is called distortion. And decreased image sharpness due to the aperture is called diffraction phenomenon. These lens aberrations can be corrected.
3 Correction of Lens Aberrations due to Optical CharacteristicsN [Enable]. 3 Select Check that [Correction data available] is displayed for the attached lens. Select [Enable], then press <0>. picture. 4 TakeThetheimage will be recorded with the peripheral illumination corrected. Depending on shooting conditions, noise may appear on the image periphery. The higher the ISO speed, the lower the correction amount will be.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Chromatic Aberration Correction 1 Select [Chromatic aberr corr]. [Enable]. 2 Select Check that [Correction data available] is displayed for the attached lens. Select [Enable], then press <0>. picture. 3 TakeThetheimage will be recorded with the chromatic aberration corrected. Distortion Correction 1 Select [Distortion correction]. [Enable]. 2 Select Check that [Correction data available] is displayed for the attached lens.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Since distortion correction is applied, the camera records an image range narrower than the one seen through the viewfinder. (The image periphery is slightly trimmed and the resolution looks slightly lowered.) Distortion correction will be reflected in the captured image, but it cannot be seen in the viewfinder during shooting. Distortion correction cannot be set during movie shooting or when Multi Shot Noise Reduction is set.
3 Correction of Lens Aberrations due to Optical CharacteristicsN Lens Correction Data The lens correction data for lens aberration corrections is registered (stored) in the camera. With [Enable] selected, the peripheral illumination correction, chromatic aberration correction, distortion correction, and diffraction correction will be applied automatically. With EOS Utility (EOS software, p.444), you can check which lenses have their correction data registered in the camera.
3 Correction of Lens Aberrations due to Optical CharacteristicsN General Cautions for Lens Aberration Correction Peripheral illumination correction, chromatic aberration correction, distortion correction, and diffraction correction cannot be applied to JPEG images already taken. When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed.
3 Setting the Color Reproduction RangeN The range of reproducible colors is called “color space”. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In Basic Zone modes, [sRGB] is set automatically. 1 Select [Color space]. Under the [z3] tab, select [Color space], then press <0>. the desired color space. 2 SetSelect [sRGB] or [Adobe RGB], then press <0>.
5 Cr e Advanced Operations for Photographic Effects at Zone ive In Creative Zone modes, you can change various settings of the camera as you desire to obtain a wide variety of shooting results, by selecting the shutter speed and/or aperture, adjusting the exposure as you prefer, etc. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes.
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * stands for Program. * AE stands for Auto Exposure. 1 Set the Mode Dial to . on the subject. 2 Focus Look through the viewfinder and aim the AF point over the subject. Then press the shutter button halfway.
d: Program AE Shooting Tips Change the ISO speed. Use the built-in flash. To match the subject and ambient lighting level, you can change the ISO speed (p.132) or use the built-in flash (p.182). In the mode, the built-in flash will not fire automatically. Therefore, press the (flash) button to raise the built-in flash when indoors or shooting in low light. Change the program using Program shift.
s: Conveying the Subject’s Movement You can either freeze the action or create motion blur with the (Shutter-priority AE) mode on the Mode Dial. * stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) 1 Frozen motion (Fast shutter speed: 1/2000 sec.) Set the Mode Dial to . the desired shutter speed. 2 SetSee “Shooting Tips” on the next page for advice on setting the shutter speed.
s: Conveying the Subject’s Movement Shooting Tips To freeze the motion of a fast-moving subject Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. according to the speed of the moving subject. To blur a running child or animal and convey an impression of motion Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow the moving subject through the viewfinder and press the shutter button to take the picture. If you use a telephoto lens, hold it steady to prevent camera shake.
f: Changing the Depth of Field To blur the background or to make everything near and far look sharp, set the Mode Dial to (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * stands for Aperture value (the size of the lens diaphragm opening). Blurred background (With a low aperture f/number: f/5.6) 1 Sharp foreground and background (With a high aperture f/number: f/32) Set the Mode Dial to . desired aperture.
f: Changing the Depth of Field Shooting Tips When using an aperture with a high f/number or shooting in low light scenes, note that camera shake can occur. A higher aperture f/number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec. In such cases, increase the ISO speed and hold the camera steady or use a tripod. The depth of field will vary depending not only on the aperture, but also on the lens and on the subject distance.
f: Changing the Depth of Field D Using the Built-in Flash To obtain a correct flash exposure, the flash output will be automatically controlled (autoflash) to match the set aperture. The shutter speed will be set automatically within the range of 1/200 sec. - 30 sec. to match the brightness of the scene. In low light, the main subject is exposed with the autoflash, and the background is exposed with a slow shutter speed set automatically.
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. While referring to the exposure level indicator in the viewfinder, you can set the exposure as desired. This method is called manual exposure. * stands for Manual. 1 Set the Mode Dial to . 2 Set the ISO speed (p.132). the shutter speed and 3 Set aperture. <6> + <6> Standard exposure index Exposure level mark To set the shutter speed, turn the <6> dial.
a: Manual Exposure Exposure Compensation with ISO Auto If the ISO speed is set to [AUTO] for manual exposure shooting, you can set exposure compensation (p.174) as follows: [z2: Expo.comp./AEB] [5:Expo comp (hold btn, turn S)] with [9: Assign SET button] under [54: Custom Functions(C.Fn)] (p.371) Quick Control (p.58) If ISO Auto is set, the ISO speed setting will change to obtain the standard exposure with the set shutter speed and aperture. Therefore, you may not obtain the desired exposure effect.
a: Manual Exposure BULB: Long (Bulb) Exposures Elapsed exposure time A bulb exposure keeps the shutter open for as long as you hold down the shutter button. It can be used to shoot fireworks and other subjects requiring long exposures. In step 3 on page 169, turn the <6> dial to the left to set . The elapsed exposure time will be displayed on the LCD monitor. Do not point the camera toward an intense light source, such as the sun or an intense artificial light source.
q Changing the Metering ModeN Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, evaluative metering is set automatically. (In the <8: x> and modes, center-weighted average metering is set.) 1 Select [Metering mode]. Under the [z3] tab, select [Metering mode], then press <0>. the metering mode. 2 SetSelect the desired metering mode, then press <0>.
q Changing the Metering ModeN e Center-weighted average metering The metering is averaged for the entire scene with the screen center weighted more heavily. This metering mode is for advanced experts. With q (Evaluative metering), the exposure setting will be locked when you press the shutter button halfway and focus is achieved. In the w (Partial metering), r (Spot metering), and e (Center-weighted average metering) modes, the exposure is set at the moment the picture is taken.
Setting the Desired Exposure CompensationN Set exposure compensation if the results of shooting without using the flash are not as bright as expected. This feature can be used in Creative Zone modes (except ). You can set the exposure compensation up to ±5 stops* in 1/3-stop increments. If the mode and ISO Auto are both set, see page 170 to set the exposure compensation.
Setting the Desired Exposure CompensationN If [z3: Auto Lighting Optimizer] (p.149) is set to any setting other than [Disable], the image may still look bright even if a decreased exposure compensation for a darker image is set. The set exposure compensation level will not be applied to movie shooting. When you set the power switch to <2>, the exposure compensation setting will be canceled. The exposure compensation amount displayed in the viewfinder goes up to only ±2 stops.
3 Auto Exposure BracketingN This feature takes exposure compensation a step further by varying the exposure automatically in the range of ±2 stops in 1/3-stop increments with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker exposure (Decreased exposure) 1 Brighter exposure (Increased exposure) Select [Expo.comp./AEB]. Under the [z2] tab, select [Expo.comp./AEB], then press <0>. the AEB range.
3 Auto Exposure BracketingN Canceling AEB Follow steps 1 and 2 to turn off the AEB range display (set to 0). The AEB setting will also be canceled automatically if the power switch is set to <2>, flash recharging is complete, etc. Shooting Tips Using AEB with continuous shooting If you set the drive mode to or (p.
A Locking the ExposureN You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the picture. This is called AE lock. It is effective for shooting backlit subjects, etc. 1 Focus on the subject. Press the shutter button halfway. X The exposure setting will be displayed. the button (0).
Mirror Lockup to Reduce Camera Vibration BlurN You can use the mirror lockup function to prevent the disturbing mechanical vibrations (mirror shock) when shooting with super telephoto lenses or shooting close-ups (macro photography). Mirror lockup is enabled by setting [6: Mirror lockup] to [1:Enable] in [54: Custom Functions (C.Fn)] (p.369). 1 Focus on the subject, then press the shutter button completely. X The mirror will swing up. 2 Press the shutter button completely again.
Mirror Lockup to Reduce Camera Vibration BlurN Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. In very bright light, such as at the beach or a ski slope on a sunny day, take the picture promptly after mirror lockup is stabilized.
6 Flash Photography This chapter describes how to shoot with built-in flash and external Speedlites (EX-series, sold separately), and how to set flash settings on the camera’s menu screen. AEB cannot be used in flash photography.
D Using the Built-in Flash In indoor, low light, or backlit conditions in daylight, just raise the built-in flash and press the shutter button to easily take beautiful pictures. In the mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake. 1 Press the button. In Creative Zone modes, you can press the button anytime to take flash pictures.
D Using the Built-in Flash Shooting Tips In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. Detach the lens hood. Do not get too close to the subject. If the lens has a hood attached or you are too close to the subject, the bottom of the picture may look dark due to the obstructed flash light. For important shots, play back the image and check to make sure the picture does not look unnaturally dark at the bottom part.
D Using the Built-in Flash 3 Flash Exposure CompensationN Set the flash exposure compensation if the brightness of the subject does not come out as desired (so you want to adjust the flash output) in flash photography. You can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. 1 Select [Flash control]. Under the [z2] tab, select [Flash control], then press <0>. 2 Select [Built-in flash settings]. 3 Select [2exp. comp.]. compensation amount.
D Using the Built-in Flash If [z3: Auto Lighting Optimizer] (p.149) is set to any setting other than [Disable], the image may still look bright even if a decreased flash exposure compensation is set. If flash exposure compensation is set with an external Speedlite (sold separately, p.187), you cannot set the flash exposure compensation with the camera (Quick Control or External flash function settings).
D Using the Built-in Flash the button (8). 3 Press Aim the viewfinder center over the subject where you want to lock the flash exposure, then press the button. X The flash will fire a preflash and the required flash output is calculated and retained in memory. X In the viewfinder, “FEL” is displayed for a moment and will light up. Each time you press the button, a preflash is fired and the required flash output is calculated and retained in memory. the picture.
D Using an External Speedlite EOS-dedicated, EX-series Speedlites Using an EX-series Speedlite (sold separately) makes flash photography easy. For operation procedures, refer to the EX-series Speedlite’s Instruction Manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites. To set the flash functions and flash Custom Functions on the camera’s menu screen, see pages 189-194.
D Using an External Speedlite Canon Speedlites Other Than the EX-series With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL autoflash mode, the flash is fired at full output at all times. Set the camera’s shooting mode to (manual exposure) or (aperture-priority AE) and adjust the aperture setting before shooting. When using a Speedlite that has manual flash mode, shoot in the manual flash mode.
3 Setting the Flash FunctionN With the built-in flash or an EX-series, external Speedlite compatible with the flash function settings, you can use the camera’s menu screen to set flash functions and the external Speedlite’s Custom Functions. If you use an external Speedlite, attach the Speedlite to the camera and turn on the Speedlite before setting the flash functions. For details on the external Speedlite’s flash functions, refer to the Speedlite’s instruction manual. 1 Select [Flash control].
3 Setting the Flash FunctionN Flash Sync. Speed in Av Mode You can set the flash-sync speed for flash photography in the aperture-priority AE mode. 4 : Auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene’s brightness. High-speed sync is also possible. (The shutter speed is set automatically within a range of 1/4000 to 30 sec.) 6 : 1/200-1/60 sec. auto Prevents a slow shutter speed from being set in low-light conditions.
3 Setting the Flash FunctionN Displaying the Flash Function Setting Screen Directly When you use the built-in flash or an external, EX-series Speedlite compatible with the flash function settings, you can press the button to directly display the [Built-in flash settings] or [External flash func. setting] screen without first displaying the menu screen. With built-in flash Press the button twice. Press the button to raise the built-in flash.
3 Setting the Flash FunctionN [Built-in flash settings] and [External flash func. setting] You can set the functions in the table below. The functions displayed under [External flash func. setting] vary depending on the Speedlite model. Select [Built-in flash settings] or [External flash func. setting]. X The flash function setting screen will be displayed. With [Built-in flash settings], only the highlighted functions can be selected and set. Flash mode [Built-in flash settings] [External flash func.
3 Setting the Flash FunctionN Flash mode When using an external Speedlite, you can select the flash mode to suit your desired photographic effects. [E-TTL II] is the standard mode of EX-series Speedlites for automatic flash photography. [Manual flash] is the mode for advanced users who want to set the [Flash output] (1/1 to 1/128) themselves. Regarding other flash modes, refer to the instruction manual of a Speedlite compatible with the respective flash mode.
3 Setting the Flash FunctionN Setting the External Speedlite Custom Functions The Custom Functions displayed under [External flash C.Fn setting] vary depending on the Speedlite model. 1 Display the Custom Function. With the camera ready to shoot with an external Speedlite, select [External flash C.Fn setting], then press <0>. the Custom Function. 2 SetPress the keys to select the function number, then set the function. The procedure is the same as setting the camera’s Custom Functions (p.364).
7 Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. If you handhold the camera and shoot while viewing the LCD monitor, camera shake may cause blurred images. Using a tripod is recommended in such cases. Remote Live View Shooting With EOS Utility (EOS software, p.444) installed on your computer, you can connect the camera to the computer and shoot remotely while viewing the computer screen.
A Shooting with the LCD Monitor 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. In the mode, the scene icon for the scene detected by the camera is displayed on the upper left of the screen (p.201). The Live View image will be displayed in the brightness level closely matching that of the actual image to be captured. on the subject. 2 Focus When you press the shutter button halfway, the camera will focus with the current AF method (p.214).
A Shooting with the LCD Monitor 3 Enabling Live View Shooting Set [z4: Live View shoot.] (the [z1] tab in Basic Zone modes) to [Enable]. Number of Possible Shots with Live View Shooting (Approx. number of shots) Temperature Room Temperature (23°C / 73°F) Low Temperatures (0°C / 32°F) No Flash 290 260 50% Flash Use 260 240 The figures above are based on a fully-charged Battery Pack LP-E17 and CIPA (Camera & Imaging Products Association) testing standards.
A Shooting with the LCD Monitor In the <8: x> mode, Live View shooting is not possible. In the <8: q> mode, the angle of view changes slightly in Live View shooting because distortion correction is applied. In the <8: FG> and modes, the image area will be smaller. For flash photography, the continuous shooting speed will become slower. Do not point the camera toward an intense light source, such as the sun or an intense artificial light source.
A Shooting with the LCD Monitor Information Display Each time you press the button, the information display will change.
A Shooting with the LCD Monitor You can display the histogram by pressing the button. However, the histogram is not displayed while pressing the shutter button completely. When is displayed in white, it indicates that the Live View image is displayed at the brightness level closely matching that of the actual image to be captured.
A Shooting with the LCD Monitor Scene Icons In the shooting mode, the camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen.
A Shooting with the LCD Monitor *4: Displayed when all the following conditions apply: The shooting scene is dark, it is a night scene, and the camera is mounted on a tripod. *5: Displayed with any of the lenses below: • EF-S18-55mm f/3.5-5.6 IS II • EF-S55-250mm f/4-5.6 IS II • EF300mm f/2.8L IS II USM • EF400mm f/2.8L IS II USM • EF500mm f/4L IS II USM • EF600mm f/4L IS II USM • Image Stabilizer lenses released in and after 2012.
Shooting Function Settings Function settings particular to Live View shooting are described here. Q Quick Control In Creative Zone modes, if you press the button with the image displayed on the LCD monitor, you can set AF method, AF operation, Drive mode, Metering mode, Image quality, White balance, Picture Style, Auto Lighting Optimizer, and Creative filters.
Shooting Function Settings the setting. 3 ExitPress <0> to finalize the setting and return to Live View shooting. You can also select [2] to return to Live View shooting. In Creative Zone modes, you can set the ISO speed by pressing the button. When you set w (Partial metering) or r (Spot metering), a metering circle will be displayed at the center of the screen. With Live View shooting, you cannot set and in drive mode or self-timer.
U Shooting with Creative Filter EffectsN While viewing the Live View image, you can apply one of seven filter effects (Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect) for shooting. The camera saves only the image with the Creative filter applied. You can also take a picture without a Creative filter, then apply an effect afterward and save it as a new image (p.356). the Mode Dial to a Creative 1 Turn Zone mode. the button (7).
U Shooting with Creative Filter EffectsN the filter effect. 5 Adjust Press the button (except for c). Press the keys to adjust the effect, then press <0>. the picture. 6 Take X The image is shot with the filter effect applied. When you set a Creative filter, single shooting will take effect even if the drive mode is set to . You cannot shoot with Creative filters if the recording quality is 1 or 1+73, or if AEB, white balance bracketing, or Multi Shot Noise Reduction is set.
U Shooting with Creative Filter EffectsN Creative Filter Characteristics G Grainy B/W Creates a grainy black-and-white photo. You can change the blackand-white effect by adjusting the contrast. W Soft focus Gives the image a soft look. You can change the degree of softness by adjusting the blur. X Fish-eye effect Gives the effect of a fish-eye lens. The image will have a barrel-type distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
U Shooting with Creative Filter EffectsN H Toy camera effect Darkens the photo’s corners and applies a unique color tone that makes it look as if it was shot by a toy camera. You can change the color cast by adjusting the color tone. c Miniature effect Creates a diorama effect. If you want the image center to look sharp, take the picture without changing any setting. To move the area that looks sharp (miniature effect frame), see “Adjusting Miniature Effect” (p.105). The AF method will be Live 1point AF.
3 Menu Function Settings When the camera is set for Live View shooting, menu options exclusive to Live View shooting will appear under the [z5] tab (the [z2] tab in Basic Zone modes). AF method You can select [u+Tracking], [Smooth zone], or [Live 1-point AF]. See pages 214-223 for the AF method. Touch Shutter Just by tapping on the LCD monitor screen, you can focus and take the picture automatically. For details, see page 224.
3 Menu Function Settings Aspect ratioN You can change the image’s aspect ratio. [3:2] is set by default. The area surrounding the Live View image is masked in black when the following aspect ratios are set: [4:3] [16:9] [1:1]. JPEG images will be saved with the set aspect ratio. RAW images will always be saved with the [3:2] aspect ratio. The selected aspect ratio information is added to the RAW image file.
Changing the Autofocus OperationN You can select the AF (autofocus) operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. the button. 1 Press X The Quick Control screen will appear. [X]. 2 Select Press the keys to select [X] (AF operation) on the left side of the screen. the AF operation. 3 Select Press the keys to select the desired AF operation, then press <0>.
Changing the Autofocus OperationN One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture. When the drive mode is set to for continuous shooting, the maximum continuous shooting speed is approx. 5.0 shots/sec.
Changing the Autofocus OperationN Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. When the drive mode is set to for continuous shooting, the maximum continuous shooting speed is approx. 3.5 shots/sec. The pictures will be taken with priority given to subject tracking. For flash photography, the continuous shooting speed will become slower (max. approx. 1.4 shots/sec.
3 Focusing with AF Selecting the AF Method You can select an AF method to suit the shooting conditions and your subject. The following AF methods are provided: [u(face)+Tracking] (p.215), [Smooth zone] (p.217), and [Live 1-point AF] (p.219). If you want to achieve precise focus, set the lens’s focus mode switch to , magnify the image, and focus manually (p.228). Select the AF method. Under the [z5] tab (the [z2] tab in Basic Zone modes), select [AF method]. Select the desired AF method, then press <0>.
3 Focusing with AF u(face)+Tracking: c The camera detects and focuses on human faces. If a face moves, the AF point
also moves to track the face. 1 Area AF frame Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. X The Area AF frame will appear. the AF point. 2 Check When a face is detected, will appear over the face to be focused on. If multiple faces are detected, will be displayed.
3 Focusing with AF the picture. 4 TakeCheck the focus and exposure, then press the shutter button completely to take the picture (p.196). Focusing on a subject other than a human face If you press the button, the AF point will appear at the screen center, and you can use the cross keys to move the AF point. Once the AF point achieves focus, the AF point will also move to track the subject if you change the composition or if the subject moves.
3 Focusing with AF Smooth Zone: o The selected Zone AF frame is used to focus. The AF area is larger than with [Live 1-point AF]. 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. Zone AF frame the AF point. 2 Select Use the cross keys to select a zone. To return to the center zone, press the button. You can also touch the LCD monitor screen to move the Zone AF frame. on the subject.
3 Focusing with AF the picture. 4 TakeCheck the focus and exposure, then press the shutter button completely to take the picture (p.196).
3 Focusing with AF Live 1-point AF: d The camera focuses with a single AF point. This is effective when you want to focus on a particular subject. the Live View image. 1 Display Press the button. AF point X The Live View image will appear on the LCD monitor. X The AF point < > will appear. During movie shooting, if [Movie Servo AF] is set to [Enable], a larger AF point will be displayed. the AF point. 2 Move Press the cross keys to move the AF point to where you want to focus.
3 Focusing with AF Notes for AF AF Operation Even when focus is achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes while the Live View image is displayed, the screen may flicker and focusing may be difficult.
3 Focusing with AF Shooting Conditions that Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under a light source whose brightness, color, or pattern keeps changing.
3 Focusing with AF Magnified View In the [Smooth zone] and [Live 1-point AF] modes, either press the button or tap on [Y] displayed on the bottom right of the screen to magnify the image by approx. 5x or 10x and check the focus. Magnified view is not possible with [u+Tracking]. To move the AF point, press the cross keys or tap on the spot you want to magnify. Either press the button or tap on [Y] to magnify the area covered by the magnifying frame.
3 Focusing with AF If focusing is difficult in the magnified view, return to the normal view and perform AF. If you perform AF in the normal view and then use the magnified view, accurate focus may not be achieved. AF speed differs between normal view and magnified view. When in magnified view, Movie Servo AF (p.273) will not function. With the magnified view, achieving focus becomes more difficult due to camera shake. Using a tripod is recommended.
x Shooting with the Touch Shutter Just by tapping on the LCD monitor screen, you can focus and take the picture automatically. 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. the Touch Shutter. 2 Enable Tap [y] on the screen’s bottom left. Each time you tap on the icon, it will toggle between [y] and [x]. [x] (Touch Shutter: Enable) The camera will focus on the spot you tap on, then the picture will be taken.
x Shooting with the Touch Shutter Even if you set the drive mode to , the camera will still shoot in the single shooting mode. Even if [AF operation] is set to [Servo AF], tapping on the screen will focus on the image with [One-Shot AF]. Tapping on the screen in magnified view will not focus or take the picture. If the Fish-eye effect Creative filter is set, the camera will focus using the AF point at the center of the screen regardless of the point you tap on.
g Taking a Self Portrait (Selfie) The Self Portrait mode processes the image to suit human subjects. In this mode, you can also adjust the background blur and brightness when shooting. 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. the LCD monitor toward the 2 Face front of the camera. As shown in the illustration, flip out the LCD monitor and face it toward the front of the camera (p.41). [g] on the screen. 3 TapEnable the self portrait.
g Taking a Self Portrait (Selfie) When using the shutter button: Press the shutter button halfway to focus, then press it completely to take the picture. After the camera achieves focus, do not change the distance between you and the camera until the picture is taken. Be careful not to drop the camera. Flash photography is not possible. Try to prevent camera shake when shooting in low-light conditions.
MF: Focusing Manually You can magnify the image and focus precisely with MF (manual focus). 1 Set the lens’s focus mode switch to . Turn the lens focusing ring to focus roughly. the magnifying frame. 2 Display Press the button. X The magnifying frame will appear. You can also tap [1] on the screen to magnify the image. the magnifying frame. 3 Move Press the cross keys to move Magnifying frame the magnifying frame to where you want to focus.
MF: Focusing Manually manually. 5 Focus While looking at the magnified image, turn the lens focusing ring to focus. After achieving focus, press the button to return to the normal view. the picture. 6 TakeCheck the focus and exposure, then press the shutter button to take the picture (p.196). In magnified view, the exposure is locked. (Shutter speed and aperture will be displayed in red.) Even with manual focusing, you can use the Touch Shutter to take a picture.
General Live View Shooting Cautions Image Quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image. If Live View shooting is used continuously for a prolonged period, the camera’s internal temperature may rise, and image quality may deteriorate. Always exit Live View shooting when you are not shooting.
General Live View Shooting Cautions Live View Image Under low- or bright-light conditions, the Live View image may not reflect the brightness of the captured image. Even if a low ISO speed is set, noise may be noticeable in the displayed Live View image under low light. However, when you shoot, the image recorded will have less noise. (The image quality of the Live View image is different from that of the recorded image.) If the light source (illumination) within the image changes, the screen may flicker.
8 Shooting Movies Movie shooting is enabled by setting the power switch to . For cards that can record movies, see page 8. If you handhold the camera and shoot movies, camera shake can cause blurred movies. In such a case, using a tripod is recommended. To shoot while handholding the camera, see page 76. Full HD 1080 Full HD 1080 indicates compatibility with HighDefinition featuring 1080 vertical pixels (scanning lines).
k Shooting Movies Connecting the camera to a TV set is recommended to play back the shot movies (p.333-335). Autoexposure Shooting When the shooting mode is set to any mode other than , autoexposure control will take effect to suit the scene’s current brightness. 1 Set the power switch to . X The reflex mirror will make a sound, then the image will appear on the LCD monitor. the Mode Dial to a mode other 2 Set than <8>, , or . on the subject.
k Shooting Movies General Movie Shooting Cautions are on pages 278-279. If necessary, also read “General Live View Shooting Cautions” on pages 230-231. In Basic Zone modes (except the <8> and modes), the shooting result will be the same as with . Also, the scene icon for the scene detected by the camera is displayed on the upper left (p.237). In the and shooting modes, the settings will be the same as when shooting in the mode.
k Shooting Movies ISO Speed in Basic Zone Modes The ISO speed will be set automatically within ISO 100 - ISO 12800. ISO Speed in the , , and Modes The ISO speed will be set automatically within ISO 100 - ISO 12800. The maximum limit varies depending on the [kISO Auto] setting (p.277). Under [54: Custom Functions(C.Fn)], if [2: ISO expansion] is set to [1:On], [Max.:H(25600)] can also be selected for [kISO Auto]. Under [54: Custom Functions(C.
k Shooting Movies Scene Icons During movie shooting in Basic Zone modes (except the <8> and modes), an icon representing the scene detected by the camera will be displayed, and the shooting will be performed to suit the scene. For certain scenes or shooting conditions, the icon displayed may not match the actual scene.
k Shooting Movies Manual Exposure Shooting In the mode, you can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. 1 Set the power switch to . X The reflex mirror will make a sound, then the image will appear on the LCD monitor. 2 Set the Mode Dial to . 3 Set the ISO speed. Press the button and press the keys or turn the <6> dial to select the ISO speed.
k Shooting Movies and shoot the movie. 5 Focus The procedure is the same as steps 3 and 4 for “Autoexposure Shooting” (p.234). ISO Speed During Manual Exposure Shooting With [AUTO], the ISO speed will be set automatically within ISO 100 - ISO 12800. The maximum limit varies depending on the [kISO Auto] setting (p.277). You can set the ISO speed manually within ISO 100 - ISO 12800 in whole-stop increments. Under [54: Custom Functions(C.
k Shooting Movies Information Display Each time you press the button, the information display will change.
k Shooting Movies The grid lines, or histogram cannot be displayed during movie shooting. (The display will disappear when you start shooting a movie.) When movie shooting starts, the movie shooting remaining time will change to the elapsed time. Final Image Simulation Final image simulation is a function that shows the movie as it will look with the current settings for the Picture Style, white balance and other shooting functions applied.
k Shooting Movies Still Photo Shooting Still photos cannot be taken during movie shooting. To take still photos, stop the movie shooting and take still photos using viewfinder shooting or Live View shooting. Cautions for Movie Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components.
k Shooting Movies Notes for Movie Shooting Each time you shoot a movie, a new movie file is created on the card. The movie image’s field of view is approx. 100% (with movie recording size set to [1920x1080]). Stereo sound is recorded by the camera’s built-in microphones. If you connect the Directional Stereo Microphone DM-E1 (sold separately) to the camera’s external microphone IN terminal (p.28), the external microphone is given the priority. Most external microphones equipped with a 3.
Shooting Function Settings Function settings particular to movie shooting are described here. Q Quick Control If you press the button when the image is displayed on the LCD monitor, you can set AF method, Movie rec. size, Digital zoom, Video snapshot, White balance, Picture Style, Auto Lighting Optimizer, and Creative filters. In Basic Zone modes, only the functions in bold above can be set. 1 Press the button (7). X The settable functions will be displayed. a function and set it.
3 Setting the Movie Recording Size With [z1: Movie rec. size], you can set the movie recording size (image size, frame rate, and compression method) and other functions. Movies will be recorded in the MP4 format. Image size L 1920x1080 Full High-Definition (Full HD) recording quality. The aspect ratio is 16:9. w 1280x720 High-Definition (HD) recording quality. The aspect ratio is 16:9. x 640x480 Standard-definition recording quality. The aspect ratio is 4:3. Frame rate (fps: frame per second) 6 29.
3 Setting the Movie Recording Size Compression method X IPB (Standard) Compresses multiple frames at a time efficiently for recording. Xv IPB (Light) Since the movie is recorded at a low bit rate for playback on various devices, the file size will be smaller than with IPB (Standard). Therefore, you can shoot longer than with IPB (Standard).
3 Setting the Movie Recording Size Movie Files Exceeding 4 GB Even if you shoot a movie exceeding 4 GB, you can keep shooting without interruption. Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you shoot a movie and the file size exceeds 4 GB, a new movie file will be created automatically. When you play back the movie, you will have to play each movie file individually.
3 Using Movie Digital Zoom When the recording size is L6/4 (NTSC) or L5 (PAL), you can shoot with an approx. 3x to 10x digital zoom. the Mode Dial to a mode other 1 Set than <8> or . [Digital zoom]. 2 Select Under the [z1] tab, select [Digital zoom], then press <0>. [Approx. 3-10x zoom]. 3 Select Select [Approx. 3-10x zoom], then press <0>. Press the button to exit the menu and return to movie shooting. digital zoom. 4 UsePress the keys. X The digital zoom bar will appear.
u Shooting HDR Movies You can reduce the clipped highlights of bright areas, which may make details hard to see, as you shoot movies even in high-contrast scenes. The recording size is L6X (NTSC) or L5X (PAL). 1 Set the Mode Dial to <8>. 2 Shoot an HDR movie. Since multiple frames are merged to create an HDR movie, certain parts of the movie image may look distorted. During handheld shooting, camera shake may make the distortion look more noticeable. Using a tripod is recommended.
v Shooting Movies with Creative Filter Effects In the (Creative filters) mode, you can shoot movies with one of five filter effects (Dream, Old Movies, Memory, Dramatic B&W, and Miniature effect movie). The recording size can be set to L6/4 (NTSC) or L5 (PAL). 1 Set the Mode Dial to . the button (7). 2 Press X The Quick Control screen will appear. [l]. 3 Select Press the keys to select [l] (Creative filters) on the upper left of the screen, then press <0>. a filter effect.
v Shooting Movies with Creative Filter Effects the filter effect level. 5 Adjust Press the button and select the icon below [Creative filters]. Press the keys to adjust the filter effect, then press <0>. When the Miniature effect movie is set, select the playback speed. 6 Shoot the movie. Magnified view is not possible. The histogram is not displayed. Movie digital zoom, video snapshot, and time-lapse movie cannot be set.
v Shooting Movies with Creative Filter Effects k Memory Creates the atmosphere of a distant memory. Gives the movie a soft look overall, reducing brightness of the periphery of the screen. You can modify the overall saturation and the dark areas along the screen edges by adjusting the filter effect. n Dramatic B&W Creates an atmosphere of dramatic realism with high-contrast black and white. You can adjust the graininess and black-and-white effect.
v Shooting Movies with Creative Filter Effects (Miniature Effect Movies) Sound will not be recorded. Movie Servo AF will not function. Miniature effect movies whose playback time is shorter than 1 sec. cannot be edited (p.328).
N Shooting Time-lapse Movies Images shot at a set interval can be stitched together automatically to create a movie file. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, etc. Time-lapse movies are recorded in the MOV format and in L6W (NTSC) or L5W (PAL) recording size. the Mode Dial to a mode other 1 Set than <8> or . [Time-lapse movie].
N Shooting Time-lapse Movies the shooting interval and 4 Set number of shots. Check the [k: Time required] and [3: Playback time] displayed at the bottom of the screen to set the shooting interval and number of shots. Set the shooting interval Playback Time required (hours:minutes:seconds) with time [Interval]. Set the number of shots with [No. of shots]. Press <0> so is displayed. Set the desired number, then press <0>. (Returns to .
N Shooting Time-lapse Movies whether to turn off the LCD 6 Set monitor automatically. Select [LCD auto off] and set. Disable The Live View image will remain displayed during shooting. Note that the LCD monitor will turn off when approx. 30 min. elapse after the shooting started. Enable The LCD monitor will turn off approx. 10 sec. after shooting the first frame. You can press the button to turn off or on the LCD monitor during shooting. the beeper for shooting.
N Shooting Time-lapse Movies Time required Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed. Playback time Indicates the recording time (time required to play back the movie) when shooting with the set intervals to create the movie in “L 6 W (NTSC)” or “L 5 W (PAL)” format. the menu. 9 ExitPress the button to turn off the menu screen. the time-lapse movie.
N Shooting Time-lapse Movies Using a tripod is recommended. To cancel the time-lapse movie shooting, press the button. (The setting will be switched to [Disable].) The time-lapse movie shot so far will be recorded on the card. You can play back the shot time-lapse movie with this camera the same way that you play back normal movies. If the time required for shooting is more than 24 hours but not more than 48, “2 days” will be indicated.
N Shooting Time-lapse Movies During time-lapse movie shooting, auto power off will not take effect. Also, you cannot adjust the shooting function and menu function settings, play back images, etc. Sound is not recorded for time-lapse movies. If the next scheduled shot is not possible, it will be skipped. This may shorten the recording time of the created time-lapse movie.
N Shooting Time-lapse Movies You can shoot time-lapse movies with a fully-charged Battery Pack LP-E17 as shown in the table below (approx. time from start of shooting until the battery becomes exhausted). The possible shooting time will vary depending on the shooting conditions. Total Possible Time for Time-lapse Movie Shooting (Approx.) LCD Monitor Room Temperature Low Temperatures During Shooting (23°C / 73°F) (0°C / 32°F) Turned on 2 hr. 15 min. Turned off 3 hr. 15 min.
3 Shooting Video Snapshots You can shoot a series of short movie clips lasting approx. 2 sec., 4 sec., or 8 sec. called video snapshots. The video snapshots can be joined together into a single movie called a video snapshot album. You can thereby show short and quick highlights of a trip or event. A video snapshot album can also be played back together with background music (p.268, 332).
3 Shooting Video Snapshots 4 Select [Album settings]. 5 Select [Create a new album]. the snapshot length. 6 Select Press <0> and use the keys to select the snapshot’s length, then press <0>. [OK]. 7 Select Press the button to exit the Shooting duration 262 menu. X A blue bar will appear to indicate the snapshot length. Go to “Creating a Video Snapshot Album” (p.263).
3 Shooting Video Snapshots Creating a Video Snapshot Album the first video snapshot. 8 Shoot Press the button, then shoot. X The blue bar indicating the shooting duration will gradually decrease. After the set shooting duration elapses, the shooting stops automatically. X The confirmation screen will appear (p.264). as a video snapshot album. 9 Save Select [J Save as album], then press <0>. X The movie clip will be saved as the video snapshot album’s first video snapshot.
3 Shooting Video Snapshots Options in Steps 9 and 10 Function Description J Save as album (Step 9) The movie clip will be saved as the video snapshot album’s first video snapshot. J Add to album (Step 10) The video snapshot just recorded will be added to the album recorded immediately before. W Save as a new album (Step 10) A new video snapshot album is created and the movie clip is saved as the first video snapshot. The new album will be a different file from the previously recorded album.
3 Shooting Video Snapshots [Playback video snapshot] Operations in Steps 9 and 10 Function Playback Description 7 Play By pressing <0>, you can play back or pause the video snapshot recorded immediately before. 5 First frame Displays the first scene of the album’s first video snapshot. P Skip backward* Each time you press <0>, the video snapshot skips back by a few seconds. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie.
3 Shooting Video Snapshots Adding to an Existing Album 1 Select [Add to existing album]. Follow step 5 on page 262 to select [Add to existing album], then press <0>. an existing album. 2 Select Press the keys to select an existing album, then press <0>. Select [OK], then press <0>. X Certain video snapshot settings will change to match the existing album’s settings. Press the button to exit the menu. X The video snapshot shooting screen will appear. the video snapshot.
3 Shooting Video Snapshots Cautions for Shooting Video Snapshots You can add to an album only the video snapshots with the same duration (approx. 2 sec., 4 sec., or 8 sec. each). Note that if you do any of the following while shooting video snapshots, a new album will be created for subsequent video snapshots. • Changing the [Movie rec. size]. • Changing the [Sound rec.] setting from [Auto]/[Manual] to [Disable] or from [Disable] to [Auto]/[Manual]. • Updating the firmware.
3 Shooting Video Snapshots Playing Back an Album You can play back a video snapshot album in the same way as a normal movie (p.326). 1 Play back the movie. Press the button to display an image. the album. 2 Select In the single-image display, the [Ot] icon displayed on the upper left of the screen indicates a video snapshot album. Press the keys to select an album. back the album. 3 PlayPress the button. On the movie playback panel displayed, select [7] (Play), then press <0>.
3 Shooting Video Snapshots Editing an Album After shooting, you can rearrange, delete, or play back the video snapshots in the album. 1 Select [X]. On the movie playback panel displayed, select [X] (Edit), then press <0>. X The editing screen will be displayed. an editing operation. 2 Select Select an editing option, then press <0>. Function Description T Move snapshot Press the keys to select the video snapshot you want to move, then press <0>.
3 Shooting Video Snapshots the edited album. 3 Save Press the button to return to the Editing panel at the screen bottom. Select [W] (Save), then press <0>. X The save screen will appear. To save it as a new album, select [New file]. To save it and overwrite the original album, select [Overwrite], then press <0>. If the card does not have enough free space, [New file] will not be available. When the battery level is low, editing albums is not possible. Use a fullycharged battery.
3 Menu Function Settings When the power switch is set to , the [z1], [z4], and [z5] tabs will be displayed as the menu options exclusive to movie shooting (the [z1], [z2], and [z3] tabs in Basic Zone modes). z1 z4 z5 z1 Movie recording size You can set the movie recording size (image size, frame rate, and compression method). For details, see page 245. Digital zoom You can use digital zoom for telephoto shooting. For details, see page 248.
3 Menu Function Settings [Sound rec./Rec. level] options [Auto] : The sound-recording level is adjusted automatically. Auto level control will operate automatically in response to the sound level. [Manual] : For advanced users. You can adjust the soundrecording level to one of 64 levels. Select [Rec. level] and press the keys while looking at the level meter to adjust the soundrecording level. Look at the peak hold indicator (approx. 3 sec.
3 Menu Function Settings Lens aberration correctionN You can set peripheral illumination correction and chromatic aberration correction. For details, see page 153. Lens electronic MFN When a lens equipped with an electronic manual focusing function is used, see page 118. z4 Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie shooting. The default setting is [Enable].
3 Menu Function Settings Cautions When [Movie Servo AF] is Set to [Enable] Shooting Conditions that Make Focusing Difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • Also see “Shooting Conditions that Make Focusing Difficult” on page 221. Since the lens is driven continuously and battery power is consumed, the possible movie shooting time (p.246) will be shortened.
3 Menu Function Settings Grid display With [3x3 l] or [6x4 m], you can display grid lines to help you level the camera vertically or horizontally before shooting. Also, with [3x3+diag n], the grid is displayed together with diagonal lines to help you compose with better balance by aligning the intersections over the subject. Note that the grid is not displayed on the LCD monitor during movie shooting.
3 Menu Function Settings z5 Video snapshot You can shoot video snapshots. For details, see page 261. Time-lapse movie You can shoot time-lapse movies. For details, see page 254. Remote control shooting When [Enable] is set, you can start or stop movie shooting using Wireless Remote Control BR-E1 (sold separately, p.382). If you are using the BR-E1, set the release mode/movie shooting switch to the position, then press the release button.
3 Menu Function Settings ISO Speed During Movie ShootingN You can set the ISO speed separately for still photo shooting and movie shooting. Set under the [z2] tab. [kISO speed] In manual exposure, you can set the ISO speed (p.239). [kISO Auto] You can set the maximum limit of the automatic ISO speed for ISO Auto to ISO 6400 or ISO 12800. Under [54: Custom Functions(C.Fn)], if [2: ISO expansion] is set to [1:On], you can select [Max.:H(25600)].
General Movie Shooting Cautions Red Internal Temperature Warning Icon If the camera’s internal temperature increases due to prolonged movie shooting or under a high ambient temperature, a red icon will appear. The red icon indicates that movie shooting will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera’s internal temperature decreases. Turn off the power and let the camera rest for a while.
General Movie Shooting Cautions Recording and Image Quality If you use a card with a slow writing speed, a five-level indicator may appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the indicator will climb upward. If the indicator becomes full, movie shooting Indicator will stop automatically.
9 Handy Features Geotagging Images (p.282) Disabling the Beeper (p.287) Card Reminder (p.287) Setting the Image Review Time (p.288) Setting the Auto Power Off Time (p.288) Adjusting the LCD Monitor Brightness (p.289) Creating and Selecting a Folder (p.290) File Numbering Methods (p.292) Setting the Copyright Information (p.295) Auto Rotation of Vertical Images (p.297) Reverting the Camera to the Default Settings (p.298) Turning the LCD Monitor Off/On (p.301) Automatic Sensor Cleaning (p.
3 Geotagging Images Using the GPS Receiver GP-E2 (sold separately) or a Bluetoothcompatible smartphone, you can append location information to images. When Using GP-E2 1 Attach the GP-E2 to the camera. Attach the GP-E2 to the camera’s hot shoe (p.28) and turn it on. For details, refer to the GP-E2 Instruction Manual. [GPS device settings]. 2 Select Under the [52] tab, select [GPS device settings]. [GPS receiver]. 3 Select Select [GPS receiver] in [Select GPS device]. picture.
3 Geotagging Images When Using a Smartphone The dedicated application Camera Connect (free of charge) must be installed on the smartphone. For details on how to install Camera Connect, refer to the Wi-Fi (Wireless Communication) Function Instruction Manual. Setting up Smartphone on GPS Device Turn on the smartphone’s location information function. 1 Connect. 2 StartTapCamera on the smartphone’s Camera Connect icon to start it. to Bluetooth. 3 Connect Connect the camera and a smartphone via Bluetooth.
3 Geotagging Images [Smartphone]. 5 Select Select [Smartphone] in [Select GPS device]. X Acquiring the location information from the smartphone becomes possible. On the [GPS device settings] screen, select [GPS information display] to check the acquired geotag information (latitude, longitude, elevation, and Coordinated Universal Time: UTC). picture. 6 TakeThethelocation information acquired by the smartphone will be appended to the image.
3 Geotagging Images GPS Connection Display With the Quick Control screen’s GPS connection indicator (p.32), you can check the status of location information acquisition from the smartphone. • Gray: Location information acquisition interrupted.* • Blinking: Location information not acquired. • On: Location information acquired.
3 Geotagging Images [52: GPS device settings] cannot be selected if the camera is connected to a computer with an interface cable. The smartphone can acquire location information only when the camera is connected to a smartphone via Bluetooth. Direction information is not acquired. The acquired location information may not be accurate depending on the travel conditions and the smartphone’s status.
Handy Features 3 Disabling the Beeper You can prevent the beeper from sounding when focus is achieved, during self-timer shooting, and during touch operations. Under the [53] tab, select [Beep], then press <0>. Select [Disable], then press <0>. To silence the beeper only for touch operations, select [Touch n]. 3 Card Reminder This setting prevents shooting if there is no card in the camera. Under the [z1] tab, select [Release shutter without card], then press <0>. Select [Disable], then press <0>.
Handy Features 3 Setting the Image Review Time You can change how long the image is displayed on the LCD monitor immediately after shooting. If [Off] is set, the image will not be displayed immediately after shooting. If [Hold] is set, the image review will be displayed up until the [Auto power off] time has elapsed. Note that during image review, if you operate any camera controls such as pressing the shutter button halfway, the image review will end.
Handy Features 3 Adjusting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to view. Under the [52] tab, select [LCD brightness], then press <0>. Press the keys to adjust the brightness on the adjustment screen, then press <0>. When checking the exposure of an image, set the LCD monitor brightness to 4 and prevent the ambient light from affecting the image.
Handy Features 3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This operation is optional since a folder will be created automatically for saving captured images. Creating a Folder 1 Select [Select folder]. Under the [51] tab, select [Select folder], then press <0>. [Create folder]. 2 Select Select [Create folder], then press <0>. a new folder. 3 Create Select [OK], then press <0>.
Handy Features Selecting a Folder Lowest file number Number of images in folder With the folder selection screen displayed, select a folder and press <0>. X The folder where the captured images will be saved is selected. Subsequently captured images will be recorded into the selected folder. Folder name Highest file number Folders As with “100CANON” for example, the folder name starts with three digits (the folder number) followed by five alphanumeric characters.
Handy Features 3 File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number will appear on your computer in this format: IMG_0001.JPG. In [File numbering] under the [51] tab, select [Numbering], then press <0>. The available settings are described below. Select the option, then press <0>.
Handy Features [Auto reset]: When you wish to restart the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
Handy Features [Manual reset]: When you wish to reset the file numbering to 0001 or to start from file number 0001 in a new folder. In [File numbering] under the [51] tab, select [Manual reset], then select [OK] on the confirmation dialog. When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001.
Handy Features 3 Setting the Copyright InformationN When you set the copyright information, it will be appended to the image as Exif information. 1 Select [Copyright information]. Under the [54] tab, select [Copyright information], then press <0>. the item to be set. 2 Select Select [Enter author’s name] or [Enter copyright details], then press <0>. text. 3 Enter Press the cross keys or turn the Character palette Input mode <6> dial to move the n and select the desired character.
Handy Features Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information. If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.].
Handy Features 3 Setting the Auto Rotation of Vertical Images Images shot in vertical orientation are rotated automatically to the proper orientation for viewing, so they will not be displayed in horizontal orientation when played back on the camera’s LCD monitor or viewed on a computer screen. You can change the setting of this feature. Under the [51] tab, select [Auto rotate], then press <0>. The available settings are described below. Select the option, then press <0>.
Handy Features 3 Reverting the Camera to the Default SettingsN The camera’s shooting function settings and menu settings can be reverted to their defaults. This option is available in Creative Zone modes. 1 Select [Clear settings]. Under the [54] tab, select [Clear settings], then press <0>. [Clear all camera settings]. 2 Select Select [Clear all camera settings], then press <0>. [OK]. 3 Select Select [OK], then press <0>.
Handy Features Shooting Function Settings Image Recording Settings <8> mode 2 (Portrait) Image quality 73 mode G (Grainy B/W) Picture Style Auto AF operation One-Shot AF AF point selection Auto selection Auto Lighting Optimizer Standard Drive mode u (Single shooting) Metering mode q (Evaluative metering) zISO speed AUTO (Auto) Chromatic aberration Enable correction zISO Auto Maximum 6400 Distortion correction Disable Exposure Canceled compensation/AEB Flash exposure compensati
Handy Features Camera Settings Auto power off 10 sec./30 sec. Live View Shooting Settings Live View shooting Enable Beep Aspect ratio Enable Release shutter without card Enable 3:2 AF method u+Tracking AF operation X Disable Image review time 2 sec. Touch Shutter AF point display Disable Metering timer 8 sec.
Handy Features 3 Turning the LCD Monitor Off/On You can set the camera so that the LCD monitor does not turn off and on as you press the shutter button halfway (or press the button/ depth-of-field preview button). Under the [52] tab, select [LCD off/on btn], then press <0>. The available settings are described below. Select the option, then press <0>. [Shutter btn.] : When you press the shutter button halfway, the display will turn off. When you let go of the shutter button, the display will turn on.
f Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit is activated to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can manually perform sensor cleaning or can disable this unit as follows. Activating the Sensor Cleaning Manually 1 Select [Sensor cleaning]. Under the [53] tab, select [Sensor cleaning], then press <0>. [Clean nowf].
f Automatic Sensor Cleaning Disabling Automatic Sensor Cleaning In step 2, select [Auto cleaningf] and set it to [Disable]. X The sensor will no longer be cleaned when you set the power switch to <1> or <2>.
3 Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However, for the case where visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later. The Dust Delete Data is used by Digital Photo Professional (EOS software, p.444) to erase the dust spots automatically. Preparation Prepare a solid white object such as a sheet of paper.
3 Appending Dust Delete DataN a solid-white object. 3 Shoot At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. X The picture will be taken in aperturepriority AE mode at an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no card in the camera. X When the picture is taken, the camera will start collecting the Dust Delete Data.
3 Manual Sensor CleaningN Dust that could not be removed by the automatic sensor cleaning can be removed manually with a commercially-available blower, etc. Before cleaning the sensor, detach the lens from the camera. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1 Select [Sensor cleaning]. Under the [53] tab, select [Sensor cleaning], then press <0>. [Clean manually].
3 Manual Sensor CleaningN When Multi Shot Noise Reduction is set, [Clean manually] cannot be selected. While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor may get damaged. • Setting the power switch to <2>. • Removing or inserting the battery. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor.
10 Image Playback This chapter describes advanced usage of the playback methods described in Chapter 2 “Basic Shooting and Image Playback”, how to play back and erase the captured images (still photos/movies), how to view them on a TV screen, and other playback-related functions. Images shot and saved with another device The camera may not be able to properly display images captured with a different camera, edited with a computer, or that have had their file names changed.
x Searching for Images Quickly H Display Multiple Images on One Screen (Index Display) Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen. 1 Play back the image. When you press the button, the last image captured will be displayed. to the index display. 2 Switch Press the button. X The 4-image index display will appear. The selected image is highlighted with an orange frame.
x Searching for Images Quickly I Jumping through Images (Jump Display) In the single-image display, you can turn the <6> dial to jump through the images forward or backward according to the jump method set. 1 Select [Image jump w/6]. Under the [x2] tab, select [Image jump w/6], then press <0>. the jump method. 2 Select Press the cross keys to select the jump method, then press <0>.
x Searching for Images Quickly by jumping. 3 Browse Press the button to play back images. In the single-image display, turn the <6> dial. X You can browse by the set method.
u/y Magnifying Images You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. 1 Magnify the image. Press the button during image playback. X The image will be magnified. If you hold down the button, the image will be magnified until it reaches the maximum magnification. Press the button to reduce the magnification. If you hold down the button, the magnification will be reduced to the single-image display. Magnified area position around the image.
d Playing Back with the Touch Screen The LCD monitor is a touch-sensitive panel that you can touch with your fingers for various playback operations. First, press the button to play back images. Browsing Images Swipe with one finger. With single-image display, touch the LCD monitor with one finger. You can browse to the next or previous image by swiping your finger to the left or right. Swipe to the left to see the next (newer) image, or swipe to the right to see the previous (older) image.
d Playing Back with the Touch Screen Reducing Image (Index Display) Pinch two fingers. Touch the screen with two fingers spread apart, and pinch your fingers together on the screen. Each time you pinch your fingers, the single-image display will change to the index display. When you select an image, the orange frame will appear. Tap on the image again to display it as a single image. Magnifying Image Spread two fingers apart.
b Rotating the Image You can use this feature to rotate the displayed image to the desired orientation. 1 Select [Rotate image]. Under the [x1] tab, select [Rotate image], then press <0>. an image. 2 Select Press the keys to select the image to be rotated. You can also select an image in the index display (p.310). the image. 3 Rotate Each time you press <0>, the image will rotate clockwise as follows: 90° 9 270° 9 0°. To rotate another image, repeat steps 2 and 3.
3 Setting Ratings You can rate images (still photos and movies) with one of the five rating marks: l/m/n/o/p. This function is called rating. Rating a Single Image 1 Select [Rating]. Under the [x2] tab, select [Rating], then press <0>. [Select images]. 2 Select X An image is displayed. the image to be rated. 3 Select Press the keys to select an image to be rated, then press <0>. By pressing the button, you can select images from a three-image display.
3 Setting Ratings Specifying the Range You can specify the range of images to rate all the images in the range at once. 1 Select [Select range]. Select [Select range] in [x2: Rating], then press <0>. the range of images. 2 Specify Select the first image (start point), then press <0>. Select the last image (end point), then press <0>. X The [X] icon will appear on the selected images. To cancel the selection, repeat this step. To return to the previous screen, press the button. the range.
3 Setting Ratings Specifying All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [x2: Rating], all the images in the folder or on the card will be specified. Turn the <6> dial to select a rating mark, then select [OK]. To cancel the rating, select the [OFF] rating mark. A total of up to 999 images of a given rating can be displayed.
3 Filtering Images for Playback You can search for images by specifying the conditions and display the filtered images. You can also play back in a slide show, protect, or erase all the found images at once. 1 Select [Set image search conditions]. Under the [x2] tab, select [Set image search conditions], then press <0>. the search conditions. 2 SetPress the keys to select the condition. Press the keys to set the setting. To cancel the condition, press the button.
3 Filtering Images for Playback the search conditions. 3 Implement Press <0>. X Read the message that appears and select [OK]. the found images. 4 Display Press the button to play back images. X Images that match the set conditions will appear in a yellow frame. If there are no images matching the search conditions, pressing <0> on the screen in step 2 will not enable [OK]. (Cannot proceed to step 3.) Even if [52: Auto power off] is set to [4 min.] or less, the auto power off time will be approx.
Q Quick Control for Playback During playback, you can press the button to set the following: [J: Protect images], [b: Rotate image], [9: Rating], [U: Creative filters], [S: Resize (JPEG images only)], [N: Cropping], [T: AF point display], [e: Image jump w/6], [t: Image search], and [q: Send images to smartphone*]. For movies, only the functions in bold above can be set. * Not selectable if [Disable] is set for [Wi-Fi] under [51: Wireless communication settings]. 1 Press the button.
Q Quick Control for Playback the setting. 3 ExitPress <0> to exit Quick Control. To rotate an image, set [51: Auto rotate] to [OnzD]. If [51: Auto rotate] is set to [OnD] or [Off], the [b Rotate image] setting will be recorded to the image, but the camera will not rotate the image for display. For images taken with another camera, the options you can select may be restricted.
k Enjoying Movies The three main ways to play back and enjoy movies are as follows: Playback on a TV Set (p.333) By connecting the camera to a TV set with an HDMI cable, you can play back the captured movies and still photos on the TV set. Since hard disk recorders do not have an HDMI IN terminal, the camera cannot be connected to a hard disk recorder with an HDMI cable. Even if the camera is connected to a hard disk recorder with a USB cable, movies and still photos cannot be played back or saved.
k Enjoying Movies Playback and Editing with a Computer The movie files recorded on the card can be transferred to a computer and played back or edited with pre-installed or general-purpose software compatible with the movie’s recording format. To play back or edit a movie with commercially-available software, use software compatible with MOV-format and MP4-format movies. For details on commercially-available software, contact the software manufacturer.
k Playing Back Movies 1 Play back the image. Press the button to display an image. a movie. 2 Select Press the keys to select the movie to be played back. In the single-image display, the icon displayed on the upper left indicates a movie. If the movie is a video snapshot, will be displayed. In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played back from the index display, press <0> to switch to the singleimage display.
k Playing Back Movies Movie Playback Panel Item Playback Operations 7 Play Pressing <0> toggles between playback and stop. 8 Slow motion Adjust the slow motion speed by pressing the keys. The slow motion speed is indicated on the upper right of the screen. 5 First frame Displays the movie’s first frame. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie. 6 Next frame Plays the movie frame-by-frame each time you press <0>.
X Editing a Movie’s First and Last Scenes Playback with the Touch Screen Tap [7] at the center of the screen. X The movie will start playing back. To display the movie playback panel, tap on the upper left of the screen. To pause the movie while it is playing back, tap on the screen. The movie playback panel will also appear. X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. 1 On the movie playback screen, select [X].
X Editing a Movie’s First and Last Scenes the edited movie. 3 Check Select [7] and press <0> to play back the edited movie. To change the edited part, go back to step 2. To cancel the editing, press the button, then select [OK] on the confirmation dialog. the edited movie. 4 Save Select [W], then press <0>. X The save screen will appear. To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press <0>.
3 Slide Show (Auto Playback) You can automatically play back all the images on the card one after another. 1 Number of images to be played back Select [Slide show]. Under the [x2] tab, select [Slide show], then press <0>. [Set up] as desired. 2 Configure Press the keys to select [Set up], then press <0>. Set the [Display time], [Repeat] (repeated playback), [Transition effect] (effect when changing images), and [Background music] for the still photos.
3 Slide Show (Auto Playback) the slide show. 3 StartPress the keys to select [Start], then press <0>. X After [Loading image...] is displayed, the slide show will start. slide show. 4 ExitTothe exit the slide show and return to the setting screen, press the button. To pause the slide show, press <0>. During pause, [G] will be displayed on the upper left of the image. Press <0> again to resume the slide show. You can also pause the slide show by tapping on the screen.
3 Slide Show (Auto Playback) Selecting the Background Music After you use EOS Utility (EOS software) to copy background music to the card, you can play background music together with the slide show. 1 Select [Background music]. Set [Background music] to [On], then press <0>. If the card has no background music, you cannot perform step 2. the background music. 2 Select Press the keys to select the desired background music, then press <0>. You can also select multiple background music tracks.
Viewing Images on a TV Set By connecting the camera to a TV set with an HDMI cable, you can play back the captured still photos and movies on the TV set. For the HDMI cable, HDMI Cable HTC-100 (sold separately) is recommended. If the picture does not appear on the TV screen, check if the [53: Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your TV set). 1 Connect the HDMI cable to the camera.
Viewing Images on a TV Set Adjust movie sound volume with the TV set. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and TV set, turn off the camera and TV set. Depending on the TV set, part of the image displayed may be cut off. Do not connect any other device’s output to the camera’s terminal. Doing so may cause a malfunction. Certain TV sets may not display the images due to incompatibility.
Viewing Images on a TV Set an image. 5 Select Point the remote control toward the TV set and press the / button to select an image. Still photo playback menu the remote control’s Enter 6 Press button. Movie playback menu 2 : Return a : 9-image index 1 : Play movie y : Slide show B : Display shooting info b : Rotate X The menu appears and you can perform the playback operations shown on the left. Press the remote control’s / button to select the desired option, then press the Enter button.
K Protecting Images You can protect important images from being accidentally erased by the camera’s erase function. 3 Protecting a Single Image 1 Select [Protect images]. Under the [31] tab, select [Protect images], then press <0>. [Select images]. 2 Select X An image is displayed. Image protection icon the image to be protected. 3 Select Press the keys to select the image to be protected. the image. 4 Protect Press <0> to protect the image. The icon will appear.
K Protecting Images 3 Specifying the Range of Images to be Protected You can specify the range of images to protect all the images in the range at once. 1 Select [Select range]. Select [Select range] in [x1: Protect images], then press <0>. the range of images. 2 Specify Select the first image (start point), then press <0>. Select the last image (end point), then press <0>. X The images will be protected and the icon will appear. To cancel the selection, repeat this step.
K Protecting Images 3 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [31: Protect images], all the images in the folder or on the card will be protected. To cancel the selection, select [Unprotect all images in folder] or [Unprotect all images on card]. If you format the card (p.68), the protected images will also be erased. Movies can also be protected.
L Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images (p.336) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing an image shot in RAW+JPEG will erase both the RAW and JPEG images. Erasing a Single Image 1 Play back the image to be erased. the button.
L Erasing Images [Select and erase images]. 2 Select X An image is displayed. the images to be erased. 3 Select Press the keys to select the image to be erased, then press <0>. X A checkmark will be displayed on the upper left of the screen. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. To select another image to be erased, repeat step 3. the images. 4 Erase Press the button.
L Erasing Images 3 Specifying the Range of Images to be Erased You can specify the range of images to erase all the images in the range at once. 1 Select [Select range]. Select [Select range] in [31: Erase images], then press <0>. the range of images. 2 Specify Select the first image (start point), then press <0>. Select the last image (end point), then press <0>. X The [X] icon will appear on the selected images. To cancel the selection, repeat this step.
W Digital Print Order Format (DPOF) DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc. The print settings will be applied to all the images specified for printing.
W Digital Print Order Format (DPOF) [Print type] K Standard Print type Date File number L Index [Date] [File No.] Prints one image on one sheet. Multiple thumbnail images are printed on one sheet. K Both Prints both the standard and index prints. L On [On] imprints the recorded date of the captured image. Off On [On] imprints the file number. Off the setting. 4 ExitPress the button. X The print order screen will reappear. Next, select [Sel.Image] or [Multiple] to order the images to be printed.
W Digital Print Order Format (DPOF) 3 Specifying Images for Printing Selecting Images Select and specify the images one by one. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. Press the button to save the print order to the card. Quantity Total images selected Checkmark Index icon 344 [Standard] [Both] Press the keys to set the number of copies to be printed for the displayed image.
W Digital Print Order Format (DPOF) Selecting Multiple Images • Select Range 1 Select [Select range]. Select [Select range] in [Multiple], then press <0>. the range of images. 2 Specify Select the first image (start point), then press <0>. Select the last image (end point), then press <0>. X The [X] icon will appear on the selected images. One copy of all the specified images will be set for printing. To cancel the selection, repeat this step. To return to the previous screen, press the button.
p Specifying Images for a Photobook You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to transfer images to a computer, the specified images for the photobook will be copied to a dedicated folder. This function is useful for ordering photobooks online. 3 Specifying One Image at a Time 1 Select [Photobook Set-up]. Under the [x1] tab, select [Photobook Set-up], then press <0>. [Select images]. 2 Select X An image is displayed.
p Specifying Images for a Photobook 3 Specifying the Range You can specify the range of images to select all the images in the range at once for the photobook. 1 Select [Select range]. In [Multiple] under [x1: Photobook Set-up], select [Select range], then press <0>. the range of images. 2 Specify Select the first image (start point), then press <0>. Select the last image (end point), then press <0>. X The [X] icon will appear on the selected images. To cancel the selection, repeat this step.
p Specifying Images for a Photobook 3 Specifying All Images in a Folder or on a Card You can also specify all the images in a folder or on a card at once for the photobook. When [Multiple] under [x1: Photobook Set-up] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be specified for the photobook. To clear your selections, select [Clear all in folder] or [Clear all on card]. RAW images or movies cannot be specified.
B: Shooting Information Display The information displayed varies depending on the shooting mode and settings.
B: Shooting Information Display Shooting information display • Detailed information Exposure compensation amount Aperture Shutter speed Shooting mode Histogram (Brightness/RGB) Shooting date and time ISO speed Scroll bar Highlight tone priority White balance Metering mode File size Auto Lighting Optimizer Flash exposure compensation amount / Multi Shot Noise Reduction White balance correction Picture Style/Settings Image-recording quality * When you shoot in the 1+73 image-recording quality, the
B: Shooting Information Display • Lens / Histogram information Lens name Focal length Histogram display (Brightness) Histogram display (RGB) • White balance information • Picture Style information 1 • Picture Style information 2 • Color space / Noise reduction information • Lens aberration correction information If you used GPS Receiver GP-E2 or smartphone to record GPS information for the image, the “GPS information” screen will also appear.
B: Shooting Information Display Movie Example Playback Aperture Shutter speed Movie shooting mode/ Time-lapse movie Creative filters Recording format Movie recording size Frame rate Movie file size Shooting time, Playback time Compression method * If manual exposure is used, the shutter speed, aperture, and ISO speed (when set manually) will be displayed. * The icon will be displayed for video snapshots.
B: Shooting Information Display Highlight Alert When the shooting information is displayed, overexposed and clipped highlights will blink. To obtain a better result for the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again. Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation.
11 Post-Processing Images After taking a picture, you can apply a filter effect, resize the JPEG image (reduce the pixel count), or crop the JPEG image. The camera may not be able to process images taken with another camera. Post-processing of images as described in this chapter cannot be performed when the camera is connected to a computer with an interface cable.
U Applying Creative Filter Effects You can apply the following Creative filters to an image and save it as a new image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. 1 Select [Creative filters]. Under the [x1] tab, select [Creative filters], then press <0>. X An image will be displayed. an image. 2 Select Select the image you want to apply a filter to.
U Applying Creative Filter Effects the image. 5 Save Select [OK] to save the image. Check the destination folder and image file number, then select [OK]. To apply a filter to another image, repeat steps 2 to 5. When shooting 1+73 or 1 image, the Creative filter will be applied to the 1 image and the image will be saved as a JPEG image. If an aspect ratio was set for a 1 image and the filter effect is applied to it, the image will be saved in the aspect ratio that is set. Dust Delete Data (p.
U Applying Creative Filter Effects Y Art bold effect Makes the photo look like an oil painting and the subject look more three-dimensional. You can adjust the contrast and saturation. Note that subjects such as the sky or white walls may not be rendered with a smooth gradation and may look irregular or have significant noise. Z Water painting effect Makes the photo look like a watercolor painting with soft colors. You can control the color density by adjusting the filter effect.
S Resizing JPEG Images You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3, 4, and a images. JPEG b and RAW images cannot be resized. 1 Select [Resize]. Under the [32] tab, select [Resize], then press <0>. X An image will be displayed. an image. 2 Select Select the image you want to resize. By pressing the button, you can switch to the index display and select an image. the desired image size.
S Resizing JPEG Images Resize Options by Original Image Quality Available Resize Settings Original Image Quality 4 a 3 k k k k k 4 b k a Image Sizes The image sizes by aspect ratios are shown in the table below. Image Quality Aspect Ratio and Pixel Count (Approx.) 3:2 16:9 1:1 4 3984x2656 3552x2664 (10.6 megapixels) (9.5 megapixels) 4:3 3984x2240* (8.9 megapixels) 2656x2656 (7.1 megapixels) a 2976x1984 (5.9 megapixels) 2656x1992 (5.3 megapixels) 2976x1680* (5.
N Cropping JPEG Images You can crop a captured JPEG image and save it as another image. Images shot in RAW cannot be cropped. JPEG images shot with 1+73 can be cropped. 1 Select [Cropping]. Under the [x2] tab, select [Cropping], then press <0>. X An image will be displayed. an image. 2 Select Select the image you want to crop. By pressing the button, you can switch to the index display and select an image. the cropping frame size, 3 Set aspect ratio, position, and tilt correction.
N Cropping JPEG Images Moving the Cropping Frame Press the or keys. X The cropping frame will move up, down, left, or right. You can also touch the cropping frame and drag it to the desired position. Correcting the Tilt Press the button. X Check the tilt with the displayed grid, then turn the <6> dial to correct the tilt. You can correct the tilt up to ±10° in 0.1° increments. X If you tap on [8] or [9] on the upper left of the screen, the tilt will be corrected in 0.5° increments.
12 Customizing the Camera Cr e You can make fine adjustments to various camera functions to suit your picture-taking preferences with Custom Functions. Custom Functions can be set and work only in Creative Zone modes.
3 Setting Custom FunctionsN 1 Custom Function number Select [Custom Functions(C.Fn)]. Under the [54] tab, select [Custom Functions(C.Fn)], then press <0>. the Custom Function 2 Select number. Press the keys to select the Custom Function number, then press <0>. the setting as desired. 3 Change Press the keys to select the desired setting (number), then press <0>. Repeat steps 2 to 3 if you want to set other Custom Functions.
3 Setting Custom FunctionsN Custom Functions C.Fn I: Exposure 1 Exposure level increments 2 ISO expansion 3 Exposure compensation auto cancel A LV Shooting k Movie Shooting k k k k k k p.367 k k k* p.366 C.Fn II: Image 4 Highlight tone priority C.Fn III: Autofocus/Drive 5 AF-assist beam firing p.368 6 Mirror lockup p.369 * When an EX-series Speedlite (sold separately) equipped with an LED light is used. C.Fn IV: Operation/Others 7 Warnings z in viewfinder p.
3 Custom Function Setting ItemsN Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn IV: Operation/Others. C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. This is effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.
3 Custom Function Setting ItemsN C.Fn II: Image C.Fn-4 Highlight tone priority 0: Disable 1: Enable Highlight details are improved. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. With setting 1, the Auto Lighting Optimizer (p.149) is automatically set to [Disable] and the setting cannot be changed. With setting 1, noise (grainy image, banding, etc.) may become slightly more noticeable than with setting 0.
3 Custom Function Setting ItemsN C.Fn III: Autofocus/Drive C.Fn-5 AF-assist beam firing Enables or disables the built-in flash’s AF-assist beam or the EOSdedicated external Speedlite’s AF-assist beam. 0: Enable The AF-assist beam will be emitted when necessary. 1: Disable The AF-assist beam will not be emitted. This prevents the AFassist beam from disturbing others. 2: Enable external flash only If an external Speedlite is attached, it will emit the AF-assist beam when necessary.
3 Custom Function Setting ItemsN C.Fn-6 Mirror lockup 0: Disable 1: Enable You can prevent the camera vibration blur due to the mechanical vibrations (mirror shock) inside the camera during shooting with super telephoto lenses or shooting close-ups (macro photography). See page 179 for the mirror lockup procedure. C.Fn IV: Operation/Others C.Fn-7 Warnings z in viewfinder When any of the following functions are set, the icon can be displayed on the viewfinder’s bottom left (p.33).
3 Custom Function Setting ItemsN C.Fn-8 Shutter/AE lock button 0: AF/AE lock 1: AE lock/AF This is convenient when you want to focus and meter separately. Press the button to autofocus, and press the shutter button halfway to apply AE lock. 2: AF/AF lock, no AE lock During AI Servo AF (or Servo AF for Live View shooting), you can press the button to pause the AF operation momentarily. This prevents the AF from being thrown off by any obstacle passing between the camera and subject.
3 Custom Function Setting ItemsN C.Fn-9 Assign SET button You can assign a frequently-used function to <0>. When the camera is ready to shoot, pressing the <0> button will display the respective function setting screen. 0: Quick Control screen 1: Image quality The image quality setting screen will appear. 2: Flash exposure comp. The flash exposure compensation setting screen will appear. 3: LCD monitor On/Off You can turn on or off the LCD monitor. 4: Menu display The menu screen will appear.
3 Custom Function Setting ItemsN C.Fn-11 Retract lens on power off This is the setting for the lens retraction mechanism when a geardriven STM lens (such as EF40mm f/2.8 STM) is attached to the camera. You can set it to retract the extended lens automatically when the camera’s power switch is set to <2>. 0: Enable 1: Disable With auto power off, the lens will not retract regardless of the setting. Before detaching the lens, make sure that it is retracted.
3 Registering My MenuN Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. You can also name the registered menu tabs, and press the button to display the My Menu tab first. When [s: Menu display] is set to [Guided], the [9] tab will not be displayed. Change the [Menu display] to [Standard] (p.54). Creating and Adding My Menu Tab 1 Select [Add My Menu tab]. Under the [9] tab, select [Add My Menu tab], then press <0>. [OK].
3 Registering My MenuN 2 Select [Select items to register]. the desired items. 3 Register Select the desired item, then press <0>. Select [OK] on the confirmation dialog. You can register up to six items. To return to the screen in step 2, press the button. My Menu Tab Settings You can sort and delete items under the menu tab, and rename or delete the menu tab. Sort registered items You can change the order of the registered items in My Menu.
3 Registering My MenuN Delete tab You can delete the My Menu tab currently displayed. Select [Delete tab] to delete the [MY MENU*] tab. Rename tab You can rename the My Menu tab from [MY MENU*]. 1 Select [Rename tab]. text. 2 Enter Press the button to delete any unnecessary characters. Press the cross keys or turn the <6> dial to move the n and select the desired character. Then press <0> to enter it. By selecting [E], you can change the input mode. You can enter up to 16 characters.
3 Registering My MenuN Deleting All My Menu Tabs / Deleting All Items You can delete all the created My Menu tabs or My Menu items registered under them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [9] tab will revert to its default. Delete all items You can delete all the items registered under the [MY MENU1] to [MY MENU5] tabs. The tab(s) will remain.
3 Registering My MenuN Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [9] tab selected. Display only My Menu tab Only the [9] tab is displayed. (The z, 3, 5, and s tabs will not be displayed.
13 Reference This chapter provides reference information for camera features, system accessories, etc. Certification Logo Select [54: Certification Logo Display] and press <0> to display some of the logos of the camera’s certifications. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
3 Checking the Battery Information You can check the conditions of the battery you are using on the LCD monitor. Select [Battery info.]. Under the [53] tab, select [Battery info.], then press <0>. X The battery information screen will appear. Battery position Battery model or household power source being used. The battery level (p.43) is displayed. Battery’s recharge performance level is displayed in three levels. (Green) : Battery’s recharge performance is fine.
Using a Household Power Outlet You can power the camera with a household power outlet by using the DC Coupler DR-E18 and AC Adapter AC-E6N (each sold separately). 1 Connect the DC coupler’s plug. Connect the DC coupler’s plug to the AC Adapter’s socket. the power cord. 2 Connect Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet. the DC coupler. 3 Insert Open the cover and insert the DC coupler securely until it locks.
Remote Control Shooting Wireless Remote Control BR-E1 (Sold Separately) Wireless Remote Control BR-E1 (sold separately) compatible with Bluetooth® low energy technology enables remote control shooting up to approx. 5 meters/16.4 feet from the camera. To use the BR-E1, you must first pair the camera and remote controller so they recognize each other. Pairing 1 Select [Wireless communication settings]. Under the [51] tab, select [Wireless communication settings], then press <0>.
Remote Control Shooting [Pairing]. 5 Select Select [Pairing], then press <0>. Press and hold the button and button simultaneously for 3 sec. or more. X Pairing starts. After the pairing is complete, the BR-E1 is registered to the camera. Still Photo Shooting remote control shooting. 6 Enable Set [z1: Drive mode] to [Q]. Movie Shooting Set [z5: Remote control] to [Enable].
Remote Control Shooting Cancelling the Paring To pair with another BR-E1, clear the connection information of the remote controller currently connected. You can check the connection status of the camera and remote controller on the [Check/clear connection info] screen in step 4. 1 Select [Wireless communication settings]. Under the [51] tab, select [Wireless communication settings], then press <0>. 2 Select [Bluetooth function]. [Check/clear connection 3 Select info]. 4 Press the button.
Remote Control Shooting F Remote Switch RS-60E3 (Sold Separately) The camera is compatible with the Remote Switch RS-60E3 that comes with an approx. 60 cm/2.0 ft cord. When connected to the camera’s remote control terminal, it can be pressed halfway and completely, just like the shutter button. Remote control shooting is also possible during movie shooting (p.276).
Remote Control Shooting Using the Eyepiece Cover When you take a picture without looking through the viewfinder, such as when you use the self-timer, bulb exposure, or a remote switch, stray light entering the viewfinder may cause the picture to look dark. To prevent this, use the eyepiece cover (p.35) attached to the camera strap. Note that attaching the eyepiece cover is not necessary in Live View shooting or movie shooting. 1 Detach the eyecup. Push the bottom of the eyecup to detach it.
H Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card manufacturer.
H Using Eye-Fi Cards the [Access point SSID:]. 5 Check Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the button to exit the menu. the picture. 6 Take X The picture is transferred and the icon switches from gray (not connected) to one of the icons in the sequence below. For transferred images, O is displayed in the shooting information Transmission status icon (p.349).
H Using Eye-Fi Cards Cautions for Using Eye-Fi Cards Under [Wi-Fi settings] of [51: Wireless communication settings], if [Wi-Fi] is set to [Enable], image transfer with an Eye-Fi card will not be possible. If “J” is displayed, an error occurred while retrieving the card information. Turn the camera’s power switch off and on again. Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal.
Function Availability Table by Shooting Mode Still Photo Shooting in Basic Zone Modes: A 7 C o: Set automatically k: User selectable Function Image quality settings selectable : Not selectable/Disabled A 7 C k k k o o o D D D Aspect ratio ISO speed Picture Style Automatically set/Auto Manually set Automatically set Manual selection k k Ambience-based shots Background blur Brightness Color tone Auto White balance Q Q Q o o o o o o o o o o o o o o o o o o o o o Preset Custom C
Function Availability Table by Shooting Mode Function AF operation (Viewfinder shooting) AF operation (Live View shooting) AF A 7 C o o o o o o k o k k o k k k k k k k k k k k k k k k k k One-Shot AF AI Servo AF AI Focus AF One-Shot AF Servo AF AF point selection AF-assist beam Program shift Exposure compensation Exposure AEB AE lock Depth-of-field preview Single shooting Continuous shooting Drive Silent single shooting*1 Silent continuous shooting*1 Self-timer/Remote control*2 Automati
Function Availability Table by Shooting Mode Still Photo Shooting in Basic Zone Modes: 8 o: Set automatically k: User selectable Function : Not selectable/Disabled 8 2 q 3 5 C 4 P x 6 Image quality settings selectable k k k k k k k k k k*1 k*1 F G o o o o o o o o Aspect ratio ISO speed Automatically set/ Auto o o o Manually set Picture Style Automatically set DDDDDD D DDDD Manual selection Ambience-based shots Background blur Brightness Color tone Auto White balance k
Function Availability Table by Shooting Mode Function AF operation (Viewfinder shooting) One-Shot AF o o o o o o o o o o o AI Servo AF AI Focus AF One-Shot AF AF operation (Live View shooting) Servo AF AF 8 2 q 3 5 C 4 P x 6 F G AF point selection AF-assist beam o o o o o o o o o o k k k k k k k o k k k o o o o o o o o Program shift Exposure compensation Exposure AEB AE lock Depth-of-field preview Single shooting Continuous shooting Drive k k k k k k k k k k k k k k k k k k k k k k Silent si
Function Availability Table by Shooting Mode Still Photo Shooting in Basic Zone Modes: v o: Set automatically k: User selectable Function G W X Z H c A B C D k Automatically set/Auto o k o k o k o k o k o k o Image quality settings selectable*1 ISO speed Picture Style : Not selectable/Disabled v k o k o k o Manually set Automatically set PPDPPPDPPP Manual selection Ambience-based shots Background blur Brightness Color tone Auto White balance Q Q Q Q Q Q Q Q Q Q Preset Custom Correc
Function Availability Table by Shooting Mode Function AF operation One-Shot AF (Viewfinder AI Servo AF shooting) AI Focus AF W X Z H c o o o o o o o o o o o o o o o o k o k o o o k o k k*2 k o o o k o k o k o k k k k k k k k k k k k k k Self-timer/Remote control*4 k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k o o o o o o o o o o o o o k k k k k k k k AF point selection AF-assist beam o o A B C D o o AF operation (Live One-Shot
Function Availability Table by Shooting Mode Still Photo Shooting in Creative Zone Modes o: Set automatically k: User selectable Function Image quality settings selectable Aspect ratio*1 ISO speed Picture Style Automatically set/Auto Manually set Automatically set Manual selection Creative filters*1*2 Auto White balance Preset Custom Correction/Bracketing Auto Lighting Optimizer Peripheral illumination correction Lens aberration correction Chromatic aberration correction Distortion correction Diffract
Function Availability Table by Shooting Mode AF operation (Viewfinder shooting) Function d s f a One-Shot AF k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k AI Servo AF AI Focus AF AF operation (Live One-Shot AF View shooting) Servo AF AF AF point selection AF-assist beam Program shift Exposure compensation Exposure AEB AE lock Depth-of-field preview Single
Function Availability Table by Shooting Mode Movie Shooting o: Set automatically k: User selectable Function A : Not selectable/Disabled 7 C 8 v y u Select movie recording size k k k Digital zoom k k k o k*1 d s f a k M k k k k k k k k o HDR movie shooting k k k k Video snapshot k k k k k k k k Time-lapse movie k k k k k k k o o o o o o k DDDDP k k k k Creative filters ISO speed Picture Style Automatically set/Auto o k Manually set Automa
Function Availability Table by Shooting Mode Function 7 C 8 v y u d s f a k M o o o o o o o o o Face+Tracking*2 k k k k k k k k k Smooth zone*2 k k k k k k k k k Live 1-point AF k k k k k k k k k Manual focusing (MF) k k k k k k k k k Movie Servo AF*2 k k k k k k k k k Exposure compensation k k k *3 AE lock k k k *4 Metering AF A Program shift Exposure Depth-of-field preview Aspect ratio Sound recording k k k k k k k
System Map ST-E2 ST-E3-RT Eyepiece Extender EP-EX15II 270EX II 430EX III-RT/ 430EX III 600EX II-RT Macro Ring Lite MR-14EX II Macro Twin Lite MT-24EX Bundled Accessories Magnifier MG-Ef Eyecup Ef Rubber Frame Ef Strap E-series Dioptric Adjustment Lenses Angle Finder C Hand Strap E2 Battery Pack LP-E17 Battery Charger LC-E17 or LC-E17E AC Adapter AC-E6N*1 Protecting Cloth PC-E1/PC-E2 400 DC Coupler DR-E18*1
System Map GPS Receiver GP-E2*2 Wireless Remote Control BR-E1 Remote Switch RS-60E3 Timer Remote Controller TC-80N3 EF lenses EF-S lenses Remote Controller Adapter RA-E3 HDMI Cable HTC-100 (2.9 m/9.5 ft.) TV/Video Directional Stereo Microphone DM-E1 Interface Cable IFC-400PCU (1.3 m/4.3 ft.) Interface Cable IFC-200U/500U (1.9 m/6.2 ft.) / (4.7 m/15.4 ft.) Connect Station CS100 USB port SD/SDHC/SDXC memory card Card reader Computer Card slot *1: AC Adapter Kit ACK-E18 can also be used.
3 Menu Settings Viewfinder Shooting (Basic Zone Modes) z: Shooting 1 (Red) Page Image quality 73/83/74/84/7a/8a/b/ 1+73*1/1*1 128 Drive mode Single shooting / Continuous shooting / Selftimer: 10-sec./remote control*2 / Self-timer: 2sec. / Self-timer: Continuous 123 Image review time Off / 2 sec. / 4 sec. / 8 sec.
3 Menu Settings Live View Shooting (Basic Zone Modes) z: Shooting 1 (Red) Page Image quality 73/83/74/84/7a/8a/b/ 1+73*1/1*1 128 Drive mode Single shooting / Continuous shooting / Selftimer: 10-sec./remote control*2 / Self-timer: 2sec. / Self-timer: Continuous 123 Image review time Off / 2 sec. / 4 sec. / 8 sec. / Hold 288 Release shutter without card Enable / Disable 287 Disable / Enable 183 Red-eye reduction *1: Not selectable in the <8: FG> and modes.
3 Menu Settings Viewfinder Shooting and Live View Shooting (Creative Zone Modes) z: Shooting 1 (Red) Page Image quality 73/83/74/84/7a/8a/b/1+73/1 128 Drive mode Single shooting / Continuous shooting / Silent single shooting*1 / Silent continuous shooting*1 / Self-timer: 10-sec./remote control*2 / Self-timer: 2-sec. / Self-timer: Continuous 123 Image review time Off / 2 sec. / 4 sec. / 8 sec.
3 Menu Settings z: Shooting 3 (Red) Metering mode Auto Lighting Optimizer White balance Page q Evaluative metering / w Partial metering / r Spot metering / e Center-weighted average metering Disable / Low / Standard / High Disable during manual exposure Q (Ambience priority) / Qw (White priority) / W/E/R/Y/U/D/O Custom White Balance Manual setting of white balance 172 149 143 145 White balance correction: B/A/M/G bias, 9 levels each 147 White balance bracketing: B/A and M/G bias, single-level increm
3 Menu Settings z: Shooting 5* (Red) AF method u+Tracking / Smooth zone / Live 1-point AF 214 Touch Shutter Disable / Enable 224 Metering timer 4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min. 209 Grid display Off / 3x3 l / 6x4 m / 3x3+diag n 209 Aspect ratio 3:2 / 4:3 / 16:9 / 1:1 * Displayed for Live View shooting.
3 Menu Settings 5: Set-up 1 (Yellow) Page Create and select a folder 290 Numbering: Continuous / Auto reset 292 Manual reset 294 Auto rotate OnzD / OnD / Off 297 Format card Erase data on the card by formatting 68 Eye-Fi settings Displayed when a commercially-available Eye-Fi card is inserted 387 Select folder File numbering Wi-Fi settings: Wi-Fi/NFC connection / Password / Connection history / MAC address Wireless communication settings Wi-Fi function: Transfer images between cameras /
3 Menu Settings 5: Set-up 2 (Yellow) Page Auto power off 10 sec/30 sec / 30 sec. / 1 min. / 2 min. / 4 min. / 8 min. / 15 min. / Disable 288 LCD brightness Adjust the brightness (seven levels) 289 LCD off/on button*1 Shutter button / Shutter/DISP / Remains on 301 Date/Time/Zone Date (year, month, day) / Time (hour, min., sec.
3 Menu Settings 5: Set-up 4 (Yellow) Page Custom Functions (C.Fn) Customize camera functions as desired 366 Clear settings Clear all camera settings / Clear all Custom Functions (C.Fn) 298 Display copyright information / Enter author’s Copyright information name / Enter copyright details / Delete copyright information Manual/software URL QR code for the download site Certification Logo Display Displays some of the logos of the camera’s certifications 295 5 379 z firmware ver.
3 Menu Settings k Movie Shooting z: Shooting 1 (Red) Page Movie recording size • 1920x1080 / 1280x720 / 640x480 • NTSC: 59.94p / 29.97p / 23.98p PAL: 50.00p / 25.00p • Standard / Light 245 Digital zoom Disable / Approx.
3 Menu Settings z: Shooting 3 (Red) Page Picture Style DAuto / PStandard / QPortrait / RLandscape / uFine Detail / SNeutral / UFaithful / VMonochrome / WUser Defined 1-3 135 White balance Q (Ambience priority) / Qw (White priority) / W/E/R/Y/U/D/O 143 Custom White Balance Manual setting of white balance 145 White balance shift B/A/M/G bias, 9 levels each 147 z: Shooting 4* (Red) Movie Servo AF Enable / Disable 273 AF method u+Tracking / Smooth zone / Live 1-point AF 274 Metering timer
Troubleshooting Guide If a problem occurs with the camera, first consult this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery does not recharge. Do not use any battery other than genuine Canon Battery Pack LP-E17. The battery charger’s lamp blinks.
Troubleshooting Guide [Battery communication error. Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery other than genuine Canon Battery Pack LP-E17. Remove and install the battery again (p.38). If the electrical contacts are dirty, use a soft cloth to clean them. The battery becomes exhausted quickly. Use a fully-charged battery (p.36). The battery performance may have degraded. See [53: Battery info.] to check the battery’s recharge performance level (p.
Troubleshooting Guide Shooting-Related Problems The lens cannot be attached. The camera cannot be used with EF-M lenses (p.48). No images can be shot or recorded. Make sure the card is properly inserted (p.38). Slide the card’s write-protect switch to the Write/Erase setting (p.38). If the card is full, replace the card or delete unnecessary images to make space (p.38, 339). You cannot take a picture when focus indicator in the viewfinder blinks during focusing with One-Shot AF.
Troubleshooting Guide The image is out of focus or blurred. Set the lens’s focus mode switch to (p.48). Press the shutter button gently to prevent camera shake (p.50-51). With a lens equipped with the Image Stabilizer, set the IS switch to <1>. In low light, the shutter speed may become slow. Use a faster shutter speed (p.164), set a higher ISO speed (p.132), use flash (p.182), or use a tripod. I cannot lock the focus and recompose the shot. Set the AF operation to One-Shot AF.
Troubleshooting Guide The standard exposure cannot be obtained or the exposure is irregular. During viewfinder shooting or Live View shooting, if you use a TS-E lens (except the TS-E17mm f/4L or TS-E24mm f/3.5L II) and shift or tilt the lens or use an extension tube, the standard exposure may not be obtained or the exposure may be irregular. The continuous shooting speed is slow.
Troubleshooting Guide Expanded ISO speeds cannot be selected. Under [54: Custom Functions(C.Fn)], if [4: Highlight tone priority] is set to [1:Enable], the settable ISO speed range will be ISO 200 ISO 25600 (up to ISO 12800 for movies) even when [2: ISO expansion] is set to [1:On]. If [0:Disable] is set for [4: Highlight tone priority], [H] can be set (p.367). This also applies to movie shooting (p.239). The Auto Lighting Optimizer cannot be set. Under [54: Custom Functions(C.
Troubleshooting Guide The built-in flash rises by itself. In shooting modes ( <8: 2qC46> ) whose default setting is (Built-in autoflash), the built-in flash will be raised automatically when necessary. In the <8: xG> and modes, when you press the shutter button halfway under low-light conditions, the built-in flash may be raised automatically and emit the AF-assist beam. The built-in flash does not fire.
Troubleshooting Guide The camera makes a noise when it is shaken. A small noise may be heard when the camera’s internal mechanism moves slightly. The shutter makes two release sounds during Live View shooting. If you use flash, the shutter will make two release sounds each time you shoot (p.198). During Live View shooting, a white s or red E icon is displayed. It indicates that the camera’s internal temperature is high. If the white icon is displayed, the still photo’s image quality may deteriorate.
Troubleshooting Guide The ISO speed cannot be set for movie shooting. In shooting modes other than , the ISO speed is set automatically. In the mode, you can manually set the ISO speed (p.239). The exposure changes during movie shooting. If you change the shutter speed or aperture during movie shooting, the changes in the exposure may be recorded. Zooming the lens during movie shooting may cause changes in the exposure regardless of whether the lens’s maximum aperture changes or not.
Troubleshooting Guide Wi-Fi Wi-Fi cannot be set. If the camera is connected to a computer or other device with an interface cable, Wi-Fi functions cannot be set. ([51: Wireless communication settings] will be grayed out.) Disconnect the interface cable before setting any functions. Refer to the Wi-Fi (Wireless Communication) Function Instruction Manual. Operation Problems A camera button or dial does not work as expected. Under [54: Custom Functions(C.Fn)], check the [9: Assign SET button] setting (p.
Troubleshooting Guide Display Problems The menu screen shows fewer tabs and options. Certain tabs or menu options are not displayed in Basic Zone modes. Set the shooting mode to a Creative Zone mode (p.60). Under the [9] tab, [Menu display] is set to [Display only My Menu tab] (p.377). The file name’s first character is an underscore (“_”). Set the color space to sRGB. If Adobe RGB is set, the first character will be an underscore (p.159). The file name starts with “MVI_”. It is a movie file (p.294).
Troubleshooting Guide [###] is displayed. If the number of images recorded on the card exceeds the number the camera can display, [###] will be displayed (p.319). The LCD monitor does not display a clear image. If the LCD monitor is dirty, use a soft cloth to clean it. In low or high temperatures, the LCD monitor display may seem slow or may look black. It will return to normal at room temperature. [Eye-Fi settings] does not appear.
Troubleshooting Guide Playback Problems Part of the image blinks in black. It is the highlight alert (p.353). Overexposed areas with clipped highlights will blink. The image cannot be erased. If the image is protected, it cannot be erased (p.336). The movie cannot be played back. Movies edited with a computer cannot be played back with the camera. Operation sound and mechanical sound can be heard during movie playback.
Troubleshooting Guide There are multiple movie files for a single movie shoot. If the movie file size reaches 4 GB, another movie file will be created automatically (p.247). However, if you use an SDXC card formatted with the camera, you can record a movie in a single file even if it exceeds 4 GB. My card reader does not recognize the card. Depending on the card reader used and the computer’s operating system, SDXC cards may not be correctly recognized.
Troubleshooting Guide Dots of light appear on the image. White, red, blue, or other colored dots of light may appear on images if the sensor is affected by cosmic rays, etc. Their appearance may be reduced by performing [Clean nowf] under [53: Sensor cleaning] (p.302). Sensor Cleaning Problems The shutter makes a sound during sensor cleaning. When you select [Clean nowf], the shutter will make a mechanical sound, but no picture is taken (p.302). Automatic sensor cleaning does not work.
Error Codes Error number If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Cause and countermeasures Number 01 02 Error Message and Solution Communications between the camera and lens is faulty. Clean the lens contacts. Î Clean the electrical contacts on the camera and lens, use a Canon lens, or remove and install the battery again (p.27, 48, 38). Card cannot be accessed. Reinsert/change card or format card with the camera.
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash SD/SDHC*/SDXC* memory cards * UHS-I cards supported Approx. 22.3 x 14.9 mm Canon EF lenses (including EF-S lenses) * Excluding EF-M lenses (35mm-equivalent angle of view is that of a lens with approx. 1.6x the focal length indicated.) Canon EF mount • Image Sensor Type: Effective pixels: Aspect ratio: Dust deletion: CMOS sensor Approx. 24.
Specifications • Image Processing During Shooting Picture Style: White balance: Noise reduction: Automatic image brightness correction: Highlight tone priority: Lens aberration correction: Auto, Standard, Portrait, Landscape, Fine Detail, Neutral, Faithful, Monochrome, User Defined 1 - 3 Auto (Ambience priority), Auto (White priority), Preset (Daylight, Shade, Cloudy, Tungsten light, White fluorescent light, Flash), Custom White balance correction, and White balance bracketing provided * Flash color temp
Specifications • Autofocus (for viewfinder shooting) Type: AF points: Focusing brightness range: Focus operation: AF-assist beam: TTL secondary image-registration, phase-difference detection with the dedicated AF sensor 9-point AF (Center point: cross-type, vertical line sensitive when supporting f/2.8) EV -0.5 - 18 (with the center AF point supporting f/2.
Specifications ISO speed (Recommended exposure index): ISO speed settings: Exposure compensation: AE lock: Basic Zone modes: ISO speed set automatically Creative Zone modes: ISO Auto, ISO 100 - ISO 25600 set manually (whole-stop increments), and ISO expansion to H (equivalent to ISO 51200) provided Maximum limit for ISO Auto settable Manual: ±5* stops in 1/3- or 1/2-stop increments * ±3 stops with [Shooting screen: Guided] set AEB: ±2 stops in 1/3- or 1/2-stop increments (can be combined with manual expo
Specifications • Flash Built-in flash: External Speedlite: Flash metering: Flash exposure compensation: FE lock: PC terminal: Flash control: Retractable, auto pop-up flash Guide No.: Approx. 9.8/32.1 (ISO 100, in meters/feet) Flash coverage: Approx. 18mm lens angle of view Recharge time: Approx. 3 sec.
Specifications • Movie Shooting Recording format: Movie: Audio: Recording size and frame rate: Compression method: Bit rate: Focus system: AF method: Movie Servo AF: Digital zoom: Focusing brightness range: Metering mode: MP4 * Time-lapse movie shooting: MOV MPEG-4 AVC / H.264 Variable (average) bit rate AAC Full HD (1920x1080): 59.94p/50.00p/29.97p/25.00p/ 23.98p HD (1280x720) : 59.94p/50.00p/29.97p/25.00p VGA (640x480) : 29.97p/25.
Specifications Metering brightness range: Exposure control: Exposure compensation: ISO speed (Recommended exposure index): ISO speed settings: HDR movie shooting: Creative filters for movies: Video snapshots: Sound recording: Grid display: Time-lapse movie: Still photo shooting: EV 0 - 20 (at room temperature, ISO 100, with centerweighted average metering) Autoexposure shooting (Program AE for movie shooting) and manual exposure ±3 stops in 1/3- or 1/2-stop increments For autoexposure shooting: ISO 100
Specifications • Playback Image display format: Highlight alert: AF point display: Zoom magnification ratio: Image search: Image browsing methods: Image rotation: Image protection: Rating: Movie playback: Slide show: Background music: Single-image display (without shooting information), Single-image display (with basic information), Singleimage display (Shooting information displayed: Detailed information, Lens/histogram, White balance, Picture Style 1, Picture Style 2, Color space/noise reduction, Lens
Specifications • Customization Features Custom Functions: My Menu: Copyright information: Display level settings: 11 Up to 5 screens can be registered Text entry and appending possible Shooting screen, Menu display, Mode guide, Feature guide • Interface DIGITAL terminal: Computer communication (Hi-Speed USB equivalent), Connect Station CS100 connection Type C (Auto switching of resolution), CEC-compatible HDMI mini OUT terminal: External microphone IN 3.
Specifications • Dimensions and Weight Dimensions (W x H x D):Approx. 122.4 x 92.6 x 69.8 mm / 4.82 x 3.65 x 2.75 in. Weight (Black): Approx. 453 g / 15.98 oz. (Including battery and card) Approx. 406 g / 14.32 oz. (Body only) Weight (Silver): Approx. 454 g / 16.01 oz. (Including battery and card) Approx. 407 g / 14.36 oz. (Body only) Weight (White): Approx. 456 g / 16.08 oz. (Including battery and card) Approx. 409 g / 14.43 oz.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Third party software This product includes third party software. expat.
Use of Genuine Canon Accessories Is Recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Digital Camera Model DS126671 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. For CA, USA only Included lithium battery contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
14 Software Start Guide / Downloading Images to a Computer This chapter describes the following: Overview of the software for EOS DIGITAL cameras How to download and install the software on a computer How to download and view the Software Instruction Manuals (PDF files) How to download images from the camera to a computer 443
Software Start Guide Software Overview This section describes an overview of various software applications for EOS DIGITAL cameras. An Internet connection is required to download and install the software. Download and installation are not possible in environments with no Internet connection. EOS Utility With the camera connected to a computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer.
Software Start Guide Downloading and Installing the Software Do not connect the camera to a computer before you install the software. The software will not be installed correctly. Even if a previous version of the software is installed on your computer, follow the procedure below to install the latest version. (The previous version will be overwritten.) 1 Download the software. Connect to the Internet from a computer and access the following Canon Web site. www.canon.
Downloading and Viewing the Software Instruction Manuals (PDF Files) Internet connection is required to download the Software Instruction Manuals (PDF files). Download is not possible in environments with no Internet connection. 1 Download the Software Instruction Manuals (PDF files). Connect to the Internet and access the following Canon Web site. www.canon.com/icpd 2 View the Software Instruction Manuals (PDF files). Double-click a downloaded Instruction Manual (PDF file) to open it.
Downloading Images to a Computer You can use EOS software to download images from the camera to a computer. There are two ways to do this. Downloading by Connecting the Camera to the Computer 1 Install the software (p.445). an interface cable (sold 2 Use separately) to connect the camera to the computer. Connect the cable to the camera’s digital terminal with the cable plug’s icon facing the front of the camera. Connect the cord’s plug to the computer’s USB terminal.
Downloading Images to a Computer Downloading Images with a Card Reader You can use a card reader to download images to a computer. Install the software (p.445). 1 the card into the card 2 Insert reader. Digital Photo Professional to 3 Use download the images. Refer to the Digital Photo Professional Instruction Manual. When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Index Numerics Art bold effect ....................... 207, 358 10- or 2-sec. self-timer ..................125 Aspect ratio .................................. 210 1280x720 (movie) .........................245 Attenuator..................................... 272 1920x1080 (movie) .......................245 Auto Lighting Optimizer ................ 149 640x480 (movie) ...........................245 Auto playback............................... 330 9-point AF auto selection ..............
Index Cards ..............................8, 27, 38, 68 Custom Functions ........................ 364 Formatting ..................................68 Low-level formatting ...................69 Troubleshooting....................40, 69 Write-protect switch....................38 Custom White Balance................. 145 D Date/time........................................ 44 Center-weighted average Daylight saving time ....................... 46 metering........................................
Index Eye-Fi cards..................................387 Shutter synchronization (1st/2nd curtain) ....................... 193 Eyepiece cover .......................35, 386 Focus indicator ............................... 72 Eyecup ..........................................386 Focus lock ...................................... 75 F FE lock ..........................................185 Feature guide..................................56 FEB (Flash exposure bracketing) .192 File extension...................
Index HDR movie ...................................249 Index display ................................ 310 High ISO speed noise reduction ...150 INFO button.................. 110, 199, 240 Highlight alert................................353 IPB (Light) .................................... 246 Highlight tone priority ....................367 IPB (Standard).............................. 246 Histogram (Brightness/RGB) ........353 ISO speed .................... 132, 236, 239 Hot shoe ...................
Index Live View shooting ..................76, 195 Menu display .................................. 54 AF operation .............................211 Aspect ratio...............................210 Creative filters...........................205 Face+Tracking..........................215 Grid display...............................209 Information display ...................199 Live 1-point AF .........................219 Manual focusing (MF)...............228 Metering timer...........................
Index Movie recording size ................245 Movie Servo AF........................273 Playback...........................324, 326 Quick Control............................244 Recording time .........................246 Sound recording .......................271 Time-lapse movie .....................254 Video snapshot album ..............261 Video snapshots .......................261 Viewing on a TV set .........324, 333 Wind filter .................................
Index Red-eye reduction.........................183 Reduced display ...........................310 Release shutter without card ........287 Remote control shooting ...............382 Remote switch ..............................385 Resizing ........................................359 Rotation (image) ...................297, 316 S Saturation......................................139 Scene icons ..........................201, 237 Scene Intelligent Auto.....................
Index Small (image-recording quality) ............................32, 128, 359 Smooth zone.................................217 U USB (digital) terminal ................... 447 V Soft focus......................102, 207, 357 Vari-angle LCD monitor ............ 41, 76 Software........................................444 Vertical image auto rotation.......... 297 Sound-recording level...................272 Video snapshot album.................. 261 Speaker.........................................
The descriptions in this Instruction Manual are current as of March 2017. For information on the compatibility with any products introduced after this date, contact any Canon Service Center. For the latest version Instruction Manual, refer to the Canon Web site. CPH-E503-000 © CANON INC.
English Camera Basic Instruction Manual The Camera Basic Instruction Manual covers the most basic operations and functions. Instruction manuals (PDF files) and software can be downloaded from the Canon Web site (p.4, 159). www.canon.
Introduction The EOS REBEL SL2 or EOS 200D is a digital single-lens reflex camera featuring a fine-detail CMOS sensor with approx. 24.2 effective megapixels, DIGIC 7, high-precision and high-speed 9-point AF, maximum continuous shooting speed of approx. 5.0 shots/sec., Live View shooting, Full High-Definition (Full HD) movie shooting, and Wi-Fi/ NFC/Bluetooth (wireless communication) function.
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Camera (with eyecup and body cap) Strap Battery Pack LP-E17 Battery Charger LC-E17/LC-E17E* (with protective cover) * Battery Charger LC-E17 or LC-E17E is provided. (The LC-E17E comes with a power cord.) The camera does not come with the Software CD-ROM, an interface cable or HDMI cable. The Instruction Manuals are listed on the next page.
Instruction Manuals Camera and Wi-Fi (Wireless Communication) Function Basic Instruction Manual The booklet is the Basic Instruction Manual. More detailed Instruction Manuals (PDF files) can be downloaded from the Canon Web site. Downloading and Viewing the Instruction Manuals (PDF Files) 1 Download the Instruction Manuals (PDF files). Connect to the Internet and access the following Canon Web site. www.canon.com/icpd Select your country or region of residence and download the Instruction Manuals.
Instruction Manuals The Instruction Manuals (PDF files) can also be downloaded using the QR code. www.canon.com/icpd A software application is required to read the QR code. Select your country or region of residence, then download the Instruction Manuals. The QR code can also be displayed under [54: Manual/software URL].
Quick Start Guide 1 Insert the battery (p.32). 2 Insert the card (p.32). 3 Upon purchase, charge the battery to start using (p.30). With the card’s label facing toward the back of the camera, insert it into the card slot. White index Red index Attach the lens (p.41). Align the lens’s white or red mount index with the camera’s mount index of the same color to attach the lens. 4 Set the lens’s focus mode switch to (p.41).
Quick Start Guide 6 Flip out the LCD monitor (p.34). 7 Focus on the subject (p.44). 8 Take the picture (p.44). 9 Review the picture. When the LCD monitor displays the date/time/zone setting screen, see page 37. Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus on the subject. The built-in flash will be raised as necessary. Press the shutter button completely to take the picture.
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (p.60). SD/SDHC*/SDXC* memory cards * UHS-I cards supported. Cards that Can Record Movies When shooting movies, use a large-capacity card with a writing/reading speed class at least as high as shown in the following table. Movie Recording Size (p.
Chapters Introduction 2 1 Getting Started and Basic Camera Operations 29 2 Basic Shooting and Image Playback 63 3 Setting the AF and Drive Modes 91 4 Image Settings 99 5 Advanced Operations for Photographic Effects 6 Shooting with the LCD Monitor (Live View Shooting) 109 119 7 Shooting Movies 135 8 Handy Features 141 9 Image Playback 149 10 Software Start Guide / Downloading Images to a Computer 157 9
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. : Indicate up, down, left, and right on the cross keys respectively. <0> : Indicates the Setting button. 0/9/7/8 : Indicates that each function remains active for approx. 4 sec., 6 sec., 10 sec., or 16 sec. after you let go of the button.
Contents Introduction 2 Item Check List .................................................................................3 Instruction Manuals........................................................................... 4 Quick Start Guide.............................................................................. 6 Compatible Cards .............................................................................8 Chapters .......................................................................................
Contents 2 Basic Shooting and Image Playback 63 A Fully Automatic Shooting (Scene Intelligent Auto)................... 64 A Full Auto Techniques (Scene Intelligent Auto) ......................... 67 7 Shooting When You Cannot Use Flash .................................... 68 C Creative Auto Shooting ............................................................ 69 8: Special Scene Mode............................................................. 70 2 Shooting Portraits.....................................
Contents 4 Image Settings 99 Setting the Image-Recording Quality ............................................ 100 g: Setting the ISO Speed for Still Photos..................................102 A Selecting a Picture Style .......................................................103 B: Matching the Light Source (White balance) ......................... 105 Auto Correction of Brightness and Contrast (Auto Lighting Optimizer)...106 Setting Noise Reduction ......................................................
Contents 8 Handy Features 141 Geotagging Images ...................................................................... 142 Handy Features............................................................................ 145 Disabling the Beeper ................................................................. 145 Card Reminder .......................................................................... 145 Setting the Image Review Time .................................................
Safety Precautions The following precautions are provided to prevent harm or injury to yourself and others. Make sure to thoroughly understand and follow these precautions before using the product. If you experience any malfunctions, problems, or damage to the product, contact the nearest Canon Service Center or the dealer from whom you purchased the product. Warnings: Follow the warnings below. Otherwise, death or serious injuries may result.
Safety Precautions When the camera or accessories are not in use, make sure to remove the battery, and disconnect the power plug and connecting cables from the equipment before storing. This is to prevent electrical shock, excessive heat, fire, and corrosion. Do not use the equipment where there is flammable gas. This is to prevent an explosion or a fire. If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the exposed internal parts.
Safety Precautions Cautions: Follow the cautions below. Otherwise, physical injury or property damage may result. Do not use or store the product in a high-temperature location such as inside a car under the hot sun. The product may become hot and cause burns. Doing so may also cause battery leakage or explosion, which will degrade the performance or shorten the life of the product. Do not carry the camera around when it is attached to a tripod. Doing so may cause an injury or an accident.
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung wet cloth.
Handling Precautions If condensation forms on the camera, do not use the camera. This is to avoid damaging the camera. If there is condensation, remove the lens, card and battery from the camera, and wait until condensation has evaporated before using the camera. If the camera will not be used for an extended period, remove the battery and store the camera in a cool, dry, well-ventilated location.
Handling Precautions Cards To protect the card and its recorded data, note the following: Do not drop, bend, or wet the card. Do not subject it to excessive force, physical shock, or vibration. Do not touch the card’s electronic contacts with your fingers or anything metallic. Do not affix any stickers, etc. on the card. Do not store or use the card near anything that has a strong magnetic field, such as a TV set, speakers, or magnets. Also avoid places prone to having static electricity.
Nomenclature Built-in flash/AF-assist beam emitter (p.117) EF lens mount index (p.41) 11 EF-S lens mount index (p.41) Flash sync contacts Mode Dial (p.24) Hot shoe Power switch (p.35) Flash button (p.117) ISO speed setting button (p.102) Wi-Fi lamp Display button (p.61) Wi-Fi button <6> Main Dial Speaker (p.154) Focal plane mark (p.77) Shutter button (p.44) Strap mount (p.29) Built-in microphones (p.136) Red-eye reduction/ Self-timer lamp (p.
Nomenclature HDMI mini OUT terminal Digital terminal (p.161) Live View shooting/ Movie shooting button (p.120/136) AE lock/ FE lock button/ Index/Reduce button (p.150) Dioptric adjustment knob (p.42) Viewfinder eyepiece Eyecup AF point selection/ Magnify button (p.94) Info button (p.89, 122, 137) Menu button (p.53) LCD monitor/ Touch screen (p.53/57, 152, 155) Access lamp (p.
Nomenclature Quick Control Screen (Example in the mode with [s: Shooting screen: Standard] set (p.51)) Shutter speed Exposure level indicator Exposure compensation amount (p.114) AEB range (p.115) Aperture z Main Dial pointer Auto Lighting Optimizer (p.106) ISO speed (p.102) Highlight tone priority Shooting mode Flash exposure compensation Picture Style (p.103) Metering mode AF operation (p.92) Manual focus (p.95) Image-recording quality (p.
Nomenclature Mode Dial The Mode Dial includes the Basic Zone modes and Creative Zone modes. Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting. A : Scene Intelligent Auto (p.64) 7 : Flash Off (p.68) C : Creative Auto (p.69) 8: Special scene (p.70) 2 Portrait (p.72) P q Group Photo (p.73) x Candlelight (p.79) Food (p.78) 3 Landscape (p.74) 6 Night Portrait (p.80) 5 Sports (p.75) F Handheld Night Scene (p.81) C Kids (p.
Nomenclature Creative Zone These modes give you more control for shooting various subjects as desired. d s f a : Program AE (p.110) : Shutter-priority AE (p.111) : Aperture-priority AE (p.112) : Manual exposure (p.
Nomenclature Viewfinder Information Display Spot metering circle Focusing screen <•> AF point activation indicator AF point (p.94) Warning icon ISO speed indicator (p.102) AE lock AEB in-progress Flash-ready (p.117) Improper FE lock warning High-speed sync FE lock / FEB in-progress Flash exposure compensation Shutter speed (p.
Nomenclature Battery Charger LC-E17 Charger for Battery Pack LP-E17 (p.30). Power plug Charge lamp Full-charge lamp Battery pack slot IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. Battery Charger LC-E17E Charger for Battery Pack LP-E17 (p.30).
28
1 Getting Started and Basic Camera Operations This chapter describes preparatory steps before you start shooting and the basic camera operations. Attaching the Provided Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is also attached to the strap.
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E17 the battery. 3 Recharge For LC-E17 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Charge the battery before use. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. After recharging the battery, detach it and disconnect the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery and Card Load a fully charged Battery Pack LP-E17 into the camera. The camera can use an SD, SDHC, or SDXC memory card (sold separately). UHS-I Speed Class SDHC and SDXC memory cards can also be used. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing/erasing. Installing the Battery and Card 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery.
Installing and Removing the Battery and Card Removing the Battery and Card the power switch to <2> 1 Set (p.35). the cover. 2 Open Make sure the access lamp is off, then open the cover. If [Recording...] is displayed, close the cover. the battery. 3 Remove Press the battery lock lever as shown by the arrow and remove the battery. To prevent short-circuiting, be sure to attach the provided protective cover (p.30) to the battery. the card. 4 Remove Gently push in the card, then let go to eject it.
Using the LCD Monitor After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, or play back photos and movies. You can change the direction and angle of the LCD monitor. 1 Flip out the LCD monitor. the LCD monitor. 2 Rotate When the LCD monitor is swung out, 180° 90° 175° you can rotate it up, down, or over 180° to face the subject. The indicated angle is only approximate. it toward you. 3 Face Normally, use the camera with the LCD monitor facing you.
Turning on the Power If you turn on the power switch and the date/time/zone setting screen appears, see page 37 to set the date/time/zone. : The camera turns on. You can shoot movies (p.136). <1> : The camera turns on. You can shoot still photos. <2> : The camera is turned off and does not function. Set the power switch to this position when not using the camera. Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, sensor cleaning will be performed automatically.
Turning on the Power z Battery Level Indicator When the power is turned on, the battery level will be indicated in one of the four levels. z : Battery level is sufficient. x : Battery level is low, but the camera can still be used. c : Battery will be exhausted soon. (Blinks) n : Recharge the battery. Number of Possible Shots with Viewfinder Shooting (Approx.
3 Setting the Date, Time, and Zone When you turn on the power for the first time or if the date/time/zone have been reset, the date/time/zone setting screen will appear. Follow the steps below to set the time zone first. Set the camera to the time zone in which you currently live so that, when you travel, you can simply change the setting to the correct time zone for your destination, and the camera will automatically adjust the date/time.
3 Setting the Date, Time, and Zone Press <0> again. Press the keys to select the time zone, then press <0>. If your desired time zone is not listed, press the button, then proceed to the next step to set it (with the time difference from the Coordinated Universal Time, UTC). To set the time difference from UTC, press the keys to select a parameter (+/-/hour/minute) for [Time difference]. Press <0> so is displayed. Press the keys to set it, then press <0>. (Returns to .
3 Setting the Date, Time, and Zone saving time. 5 SetSettheit asdaylight necessary. Press the keys to select [Y]. Press <0> so is displayed. Press the keys to select [Z], then press <0>. When the daylight saving time is set to [Z], the time set in step 4 will advance by 1 hour. If [Y] is set, the daylight saving time will be canceled and the time will go back by 1 hour. the setting. 6 ExitPress the keys to select [OK], then press <0>.
3 Selecting the Interface Language 1 Display the main tabs. Press the button to display the main tabs. the [52] tab, select 2 Under [LanguageK]. Press the keys to select the [5] tab, then press <0>. Press the keys to select the [52] tab. Press the keys to select the [LanguageK], then press <0>. the desired language. 3 SetPress the keys to select the language, then press <0>. X The interface language will change.
Attaching and Detaching a Lens The camera is compatible with all Canon EF and EF-S lenses. Note that you cannot use the EF-M lenses. Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’s red or white index White index with the camera’s index matching the same color. Turn the lens as shown by the arrow until it clicks in place. Red index the lens’s focus mode switch 3 Set to .
Attaching and Detaching a Lens Zooming Turn the zoom ring on the lens with your fingers. Perform the zoom operation before focusing. Turning the zoom ring after achieving focus may throw off the focus. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens. Doing so may cause loss of vision.
Basic Shooting Operations Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the AF points in the viewfinder look sharp. If the knob is difficult to turn, remove the eyecup. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. Horizontal shooting Vertical shooting 1. Wrap your right hand around the camera grip firmly. 2. Hold the lens bottom with your left hand. 3.
Basic Shooting Operations Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder (0). While you press the shutter button halfway, the LCD monitor will turn off.
3 Setting the Screen Display Level You can set how information is displayed on the screen according to your preference. Change the settings as necessary. 1 Display the main tabs. Press the button to display the main tabs. the [s] tab. 2 Select Press the keys of the cross keys to select the [s] tab, then press <0>. Shooting Screen You can select [Standard] or [Guided] (friendly display) for the Quick Control screen in viewfinder shooting. By default, it is set to [Guided].
3 Setting the Screen Display Level Sample Screens : Guided : Standard : Guided : Standard In Creative Zone modes, when [Guided] is set, only the functions particular to the set shooting mode are displayed on the Quick Control screen. Note that items that cannot be set from the Quick Control screen when [Guided] is selected can be set via the menu screen (p.54).
3 Setting the Screen Display Level Menu Display You can select the display type from [Standard] or [Guided]. If you set [Guided], main tab descriptions are provided when you press the button. If you set [Standard], you proceed directly to the menu screen when you press the button. By default, it is set to [Guided]. 1 Select [Menu display]. 2 Select the display type. Main tabs When [Guided] is set, the [9 (My Menu)] tab does not appear.
3 Setting the Screen Display Level Shooting Mode Guide You can display the description of the shooting mode (mode guide) when switching the shooting mode during viewfinder shooting. By default, it is set to [Enable]. 1 Select [Mode guide]. 2 Select [Enable]. the Mode Dial. 3 Turn X A description of the selected shooting mode will appear. the key. 4 Press X The rest of the description will appear. When you press <0>, the description will disappear and the Quick Control screen will appear.
3 Setting the Screen Display Level Feature Guide When using Quick Control or setting menu items, you can display a brief description of functions and options (feature guide). By default, it is set to [Enable]. 1 Select [Feature guide]. 2 Select [Enable]. Sample Screens Quick Control screen Menu screen Feature guide The description will disappear when you tap on it or proceed with the operation.
3 Setting the Screen Display Level Shooting Tips Shooting tips appear when [Shooting screen] is set to [Guided] (p.45) and the camera settings result in any of the following conditions. In Basic Zone modes, shooting tips appear regardless of the [Shooting screen] setting. • You want to blur the background further (by setting the lowest aperture value in the mode). • The image is likely to be overexposed. • The image is likely to be underexposed.
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor with intuitive operations. This is called Quick Control. 1 Press the button (7). X The Quick Control screen will appear. the desired functions. 2 SetPress the cross keys to select a function. X The settings of the selected function and Feature guide (p.49) will appear. Turn the <6> dial to change the setting. Basic Zone modes Creative Zone modes the picture.
Q Quick Control for Shooting Functions Sample Quick Control Screen When [s: Shooting screen: Guided] is Set Aperture (p.112) Exposure compensation (p.114) AF operation (p.92) Return Drive mode (p.96) AF point selection (p.94) When [s: Shooting screen: Standard] is Set Aperture (p.112) White balance bracketing Shutter speed (p.111) Shooting mode* (p.24) Highlight tone priority* Exposure compensation/ AEB setting (p.114) ISO speed (p.102) Flash exposure compensation Picture Style (p.
3 Menu Operations and Configurations You can configure various settings with the menus such as the imagerecording quality, date/time, etc. button <0> button LCD monitor cross keys Menu Screen The menu tabs and items displayed vary depending on the shooting mode.
3 Menu Operations and Configurations Menu Setting Procedure When [s: Menu display: Guided] is Set Main tabs 1 Display the main tabs. When you press the button, the main tabs and a description of the selected tab will appear. a main tab. 2 Select Each time you press the keys of the cross keys, the main tab (group of functions) will switch. the menu screen. 3 Display Press <0> to display the menu screen. To return to the main tab screen, press the button. a secondary tab.
3 Menu Operations and Configurations the setting. 6 Select Press the or keys of the cross keys to select the desired setting. (Some settings are selected with the and keys, and others are selected with the and keys.) The current setting is indicated in blue. the setting. 7 SetPress <0> to set it. X If you change the setting from the default, it will be indicated in blue (available only for the menu items under the [z] tab). the setting.
3 Menu Operations and Configurations When [s: Menu display: Standard] is Set Main tabs 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Turn the <6> dial or press the keys to select the main tab and secondary tab. For example, in this manual, the [z4] tab refers to the screen displayed when the z (Shooting) tab’s [4] is selected. The subsequent operations are the same as those for [s: Menu display: Guided].
d Operating the Camera with Touch Screen You can operate the camera by tapping on the LCD monitor (touchsensitive panel) with your fingers. Tap Sample Screen (Quick Control) Use your finger to tap on (touch briefly and then remove your finger from) the LCD monitor. By tapping, you can select menus, icons, etc. displayed on the LCD monitor. For example, when you tap on [ ], the Quick Control screen appears. By tapping on [Q], you can return to the preceding screen.
d Operating the Camera with Touch Screen Drag Sample Screen (Menu screen) Slide your finger while touching the LCD monitor.
d Operating the Camera with Touch Screen 3 Setting the Touch Control Response 1 Select [Touch control]. Under the [53] tab, select [Touch control], then press <0>. the touch control response 2 Set setting. Select the desired setting, then press <0>. [Standard] is the normal setting. [Sensitive] provides a more reactive touch screen response than [Standard]. Try using both settings and select the one you prefer. To disable touch operations, select [Disable].
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc. before formatting the card. 1 Select [Format card]. Under the [51] tab, select [Format card], then press <0>. the card.
Switching the LCD Monitor Display The LCD monitor can display the Quick Control screen, menu screen, captured images, etc. When you turn on the power, the Quick Control screen will appear. You can then check the current shooting function settings. When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on. You can also turn off the display by pressing the button. Press the button again to turn on the display.
62
2 Basic Shooting and Image Playback This chapter describes how to use the Basic Zone modes on the Mode Dial for best results and how to play back images. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically (p.86). Also, because advanced shooting function settings cannot be changed, you can enjoy shooting photographs without worrying about botched pictures due to misoperation.
A Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject (p.67). 1 AF point Set the Mode Dial to . AF point over the subject. 2 AimAllthe the AF points will be used to focus, and the camera will normally focus on the closest object.
A Fully Automatic Shooting (Scene Intelligent Auto) the picture. 4 TakePress the shutter button completely to take the picture. X The captured image will be displayed for approx. 2 sec. on the LCD monitor. When you finish shooting, push down the built-in flash with your fingers. The mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
A Fully Automatic Shooting (Scene Intelligent Auto) The beeper continues to beep softly. (The focus indicator does not light up.) It indicates that the camera is focusing continuously on a moving subject. (The focus indicator does not light up.) You can take sharp pictures of a moving subject. Note that focus lock (p.67) will not work in this case. Pressing the shutter button halfway does not focus on the subject.
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. In the mode, pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock”.
7 Shooting When You Cannot Use Flash The camera analyzes the scene and sets the optimum settings automatically. In places where flash photography is prohibited such as in a museum or an aquarium, use the <7> (Flash Off) mode. Shooting Tips Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
C Creative Auto Shooting is a fully-automatic shooting mode that is a step more advanced from . You can adjust the photo’s ambience, background blur, etc. before shooting. By pressing the button, you can set 1. Ambience-based shots, 2. Background blur setting, 3. Drive mode, and 4. Built-in flash firing with Quick Control. * stands for Creative Auto. 1 Set the Mode Dial to . the button (7). 2 Press X The Quick Control screen will appear. the desired functions.
8: Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. * <8> stands for Special Scene. 1 Set the Mode Dial to <8>. 2 Press the button. a shooting mode. 3 Select Press the keys to select the desired shooting mode, then press <0>. You can also select by turning the <6> dial.
8: Special Scene Mode Available Shooting Modes in the <8> Mode Shooting Mode Page Shooting Mode Page 2 Portrait p.72 P Food p.78 q Group Photo p.73 x Candlelight p.79 3 Landscape p.74 6 Night Portrait p.80 5 Sports p.75 F Handheld Night Scene p.81 C Kids p.76 G HDR Backlight Control p.82 4 Close-up p.
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. アテ Shooting Tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
q Shooting Group Photos Use the (Group Photo) mode to shoot group photos. You can take a picture in which both the people in the front and people in the back are all in focus. Shooting Tips Use a wide-angle lens. When using a zoom lens, use the wide-angle end to make it easy to get all the people in the group in focus at once, from the front row to the back.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus. It also adds breadth to landscapes. Shooting night scenes. The <3> mode is also good for night scenes because it disables the built-in flash.
5 Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips Use a telephoto lens. Use of a telephoto lens is recommended for shooting from a distance. Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink.
C Photographing Children When you want to continuously focus on and photograph children running around, use (Kids). Skin tones will look healthy. Shooting Tips Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink. Shoot continuously. The default setting is (Continuous shooting).
4 Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject. Check the lens for its minimum focusing distance. Some lenses have indications such as <0.25m/0.8ft> on them.
P Shooting Food When shooting food, use
(Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips Change the color tone. You can change [Color tone]. To increase the food’s reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red. Avoid using flash. If you use flash, the light may reflect off the dish or food and results in unnatural shadows.
x Shooting Candlelight Portraits When you want to photograph a human subject lit in candlelight, use (Candlelight). The atmosphere of candlelight is reflected in the color tones of the picture. Shooting Tips Use the center AF point to focus. Aim the center AF point in the viewfinder over the subject, then shoot. Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
6 Shooting Night Portraits (With a Tripod) When you want to photograph people at night and obtain a naturallooking night scene in the background, use the <6> (Night Portrait) mode. Using a tripod is recommended. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, since camera shake is prone to occur with handheld shooting, use a tripod. Check the subject’s brightness.
F Shooting Night Scenes (Handheld) Using a tripod when shooting a night scene gives the best results. However, the (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. In this shooting mode, four shots are taken consecutively for each picture, and the resulting one image with reduced camera shake is recorded. Shooting Tips Hold the camera firmly. During shooting, hold the camera firmly and steadily.
G Shooting Backlit Scenes When shooting a scene having both the bright and dark areas, use the (HDR Backlight Control) mode. When you take one picture in this mode, three consecutive shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting. Shooting Tips Hold the camera firmly. During shooting, hold the camera firmly and steadily. In this mode, three shots are aligned and merged into a single image.
v Shooting with Creative Filter Effects In the (Creative filter) mode, you can apply one of ten filter effects (Grainy B/W*, Soft focus*, Fish-eye effect*, Water painting effect*, Toy camera effect*, Miniature effect*, HDR art standard, HDR art vivid, HDR art bold, and HDR art embossed) for shooting. When the camera is set for Live View shooting, you can see the effect on the screen before you start shooting. The camera saves only the image with the Creative filter effects applied.
v Shooting with Creative Filter Effects a shooting mode. 4 Select Press the keys to select a shooting mode, then press <0>. X The image will be displayed with the effects of the filter applied. Available Shooting Modes in the v Mode Shooting Mode Shooting Mode G Grainy B/W c W Soft focus A HDR art standard Miniature effect X Fish-eye effect B HDR art vivid Z Water painting effect C HDR art bold H Toy camera effect D HDR art embossed the effect.
Q Quick Control In Basic Zone modes, pressing the button sets the camera to the Quick Control state and enables you to set the items shown in the tables on pages 86-87. Example: the Mode Dial to a Basic Zone 1 Set mode. the button (7). 2 Press X The Quick Control screen will appear. the desired functions. 3 SetPress the cross keys to select a function. (This procedure is not necessary in the 7 mode.) X The settings of the selected function and Feature guide (p.49) will appear.
Q Quick Control Settable Functions in Basic Zone Modes o: Default setting* k: User selectable Drive mode (p.96) 8 q 3 o o k k 5 k o k k k k k k k k k k o k k k k k k o k k k k o k k k k k k o o k k k k G A 7 C u: Single shooting o k o k m/Q: Self-timer: 10 sec./ remote control k l: 2sec.
Q Quick Control o: Default setting* k: User selectable G o W o m/Q: Self-timer: 10 sec./ remote control k k k k k l: 2sec. k k o k k k k k o k k k k k o k k k k k o k k k k k o k k k c o A o k v B o k C o k D o k m/Q: Self-timer: 10 sec./ remote control k k k k k l: 2sec. k k k k o k k k k k k k k o o o o Function u: Single shooting Drive mode (p.96) a: Automatic firing D: Flash on (Fires at all times) b: Flash off Adjustment of effects (p.
Adjusting the Brightness In Basic Zone modes, when a mode other than , <7>, , <8: G>, or is set, you can adjust the brightness for shooting. You can adjust both the brightness and darkness across 3-step ranges with 0 being the standard. 1 Set the Mode Dial to <8: 2q35C4Px6F>. Set to any mode other than . the Live View image. 2 Display Press the button to display the Live View image (except ). Quick Control, select the 3 With desired brightness. Press the button (7).
x Image Playback The easiest way to play back images is described below. For more details on the playback procedure, see page 149. 1 Play back the image. Press the button. X The last image captured or played back will appear. an image. 2 Select To play back images starting with the last image captured, press the key. To play back images starting with the first captured image, press the key. Each time you press the button, the display will change.
x Image Playback the image playback. 3 ExitPress the button to exit the image playback and return to shooting-ready state. Shooting Information Display With the shooting information screen displayed (p.89), you can press the keys to change the shooting information displayed at the screen bottom as follows.
3 Setting the AF and Drive Modes The AF points in the viewfinder are arranged to make AF shooting suitable for a wide variety of subjects and scenes. You can also select the AF operation and drive mode that best match the shooting conditions and subject. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (p.25). In Basic Zone modes, the AF operation is set automatically. stands for autofocus. stands for manual focus.
f: Changing the Autofocus OperationN You can select the AF (autofocus) operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1 Set the lens focus mode switch to . the Mode Dial to a Creative 2 Turn Zone mode. [AF operation]. 3 Select Under the [z1] tab, select [AF operation], then press <0>. X [AF operation] will appear. the AF operation.
f: Changing the Autofocus OperationN One-Shot AF for Still Subjects AF point Focus indicator Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. The dot inside the AF point achieving focus lights up briefly in red, and the focus indicator in the viewfinder will also light up. With evaluative metering, the exposure setting will be set at the same time focus is achieved. While you keep holding down the shutter button halfway, the focus will be locked.
S Selecting the AF Point When <8: x> or mode is set, since the camera automatically focuses on the closest subject in normal cases, it may not always focus on your desired subject. In any other mode, you can select one AF point to focus solely on the subject that AF point is aimed over. 1 Press the button (9). X The selected AF point will be displayed on the LCD monitor and in the viewfinder. the AF point. 2 Select Use the cross keys to select the AF point.
MF: Manual Focus the lens’s focus mode switch 1 Set to . on the subject. 2 Focus Focus by turning the lens focusing Focusing ring ring until the subject looks sharp in the viewfinder.
i Selecting the Drive Mode Single and continuous drive modes are provided. 1 Press the button. X The Quick Control screen will appear. [ ]. 2 Select Press the keys to select [ ], then press <0>. the drive mode. 3 Select Press the keys to select the desired drive mode, then press <0>. u : Single shooting When you press the shutter button completely, only one shot will be taken. i : Continuous shooting (Max. approx. 5.0 shots/sec.
i Selecting the Drive Mode m/Q: 10-sec. self-timer/remote control (when Wireless Remote Control BR-E1 (sold separately) is used) l : 2-sec. self-timer q : Self-timer: Continuous For self-timer shooting, see page 98.
j Using the Self-timer 1 Press the button. X The Quick Control screen will appear. [ ]. 2 Select Press the keys to select [ 3 ], then press <0>. Select the self-timer. Press the keys to select the self-timer, then press <0>. m/Q: 10 sec./remote control self-timer Remote control shooting with the Wireless Remote Control BR-E1 (sold separately) is also possible. l: 2-sec. self-timer q: 10-sec.
4 Image Settings This chapter describes image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, and noise reduction. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (p.25).
3 Setting the Image-Recording Quality You can select the pixel count and its image quality. Nine imagerecording quality settings are provided: 73, 83, 74, 84, 7a, 8a, b, 1+73, 1. 1 Select the image-recording quality. Under the [z1] tab, select [Image quality], then press <0>. X [Image quality] will appear. Pixels recorded (pixel count) Possible shots the image-recording quality.
3 Setting the Image-Recording Quality Guide to Image-recording Quality Settings Image Quality 73 83 High quality 74 Medium 84 quality JPEG 7a 8a b Low quality Pixels Recorded 24M 11M 5.9M 3.8M File Size (MB) (Approx.) Possible Shots Maximum Burst 7.6 950 Full (Full) 3.9 1840 Full (Full) 4.1 1790 Full (Full) 2.0 3480 Full (Full) 2.6 2730 Full (Full) 1.3 5260 Full (Full) 1.8 3810 Full (Full) 29.4+7.6 170 6 (6) High 24M quality 1 29.
g: Setting the ISO Speed for Still PhotosN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically. 1 Press the button (9). the ISO speed. 2 SetWhile looking in the viewfinder or at the LCD monitor, press the keys or turn the <6> dial to select the desired ISO speed, then press <0>. ISO speed can be set within ISO 100 ISO 25600. With [AUTO] selected, the ISO speed will be set automatically.
A Selecting a Picture StyleN Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. 1 Select [Picture Style]. Under the [z4] tab, select [Picture Style], then press <0>. X The Picture Style selection screen will appear. a Picture Style. 2 Select Select a Picture Style, then press <0>. X The Picture Style will be set.
A Selecting a Picture StyleN Q Portrait For nice skin tones. The image looks softer. Suited for close-up portraits. By changing the [Color tone], you can adjust the skin tone. R Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes. u Fine Detail Suited for detailed outline and fine texture description of the subject. The colors will be slightly vivid. S Neutral Geared for users who prefer to process images with their computer.
B: Matching the Light SourceN White balance (WB) is for making the white areas look white. Normally, the Auto [Q] (Ambience priority) or [Qw] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. In Basic Zone modes, [Q] (Ambience priority) is set automatically. (In the
mode, [Qw] (White priority) is set.) 1 Select [White balance].
3 Auto Correction of Brightness and ContrastN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured. In Basic Zone modes, [Standard] is set automatically. 1 Select [Auto Lighting Optimizer]. Under the [z3] tab, select [Auto Lighting Optimizer], then press <0>. the setting.
3 Setting Noise ReductionN High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. Change the setting to match the noise level. 1 Select [High ISO speed NR]. Under the [z4] tab, select [High ISO speed NR], then press <0>. the level.
3 Setting Noise ReductionN Long Exposure Noise Reduction Noise reduction is possible with images exposed for 1 sec. or longer. 1 Select [Long exp. noise reduction]. Under the [z4] tab, select [Long exp. noise reduction], then press <0>. the desired setting. 2 SetSelect the desired setting, then press <0>. [Auto] For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective enough in most cases.
5 Cr e Advanced Operations for Photographic Effects at Zone ive In Creative Zone modes, you can change various settings of the camera as you desire to obtain a wide variety of shooting results, by selecting the shutter speed and/or aperture, adjusting the exposure as you prefer, etc. The O icon at the upper right of the page title indicates that the function is available only in Creative Zone modes.
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * stands for Program. * AE stands for Auto Exposure. 1 Set the Mode Dial to . on the subject. 2 Focus Look through the viewfinder and aim the AF point over the subject. Then press the shutter button halfway.
s: Conveying the Subject’s Movement You can either freeze the action or create motion blur with the (Shutter-priority AE) mode on the Mode Dial. * stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) 1 Frozen motion (Fast shutter speed: 1/2000 sec.) Set the Mode Dial to . the desired shutter speed. 2 SetTurning the <6> dial clockwise sets a faster shutter speed, and turning it counterclockwise sets a slower one. the picture.
f: Changing the Depth of Field To blur the background or to make everything near and far look sharp, set the Mode Dial to (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * stands for Aperture value (the size of the lens diaphragm opening). Blurred background (With a low aperture f/number: f/5.6) 1 Sharp foreground and background (With a high aperture f/number: f/32) Set the Mode Dial to . desired aperture.
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. While referring to the exposure level indicator in the viewfinder, you can set the exposure as desired. This method is called manual exposure. * stands for Manual. 1 Set the Mode Dial to . 2 Set the ISO speed (p.102). the shutter speed and 3 Set aperture. <6> + <6> Standard exposure index Exposure level mark To set the shutter speed, turn the <6> dial.
Setting the Desired Exposure CompensationN Set exposure compensation if the results of shooting without using the flash are not as bright as expected. This feature can be used in Creative Zone modes (except ). You can set the exposure compensation up to ±5 stops* in 1/3-stop increments. * In Live View shooting/movie shooting, or when [s: Shooting screen] is set to [Guided], exposure compensation can be set up to ±3 stops. 1 Increased exposure for a brighter image Check the exposure level indicator.
3 Auto Exposure BracketingN This feature takes exposure compensation a step further by varying the exposure automatically in the range of ±2 stops in 1/3-stop increments with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker exposure (Decreased exposure) 1 Brighter exposure (Increased exposure) Select [Expo.comp./AEB]. Under the [z2] tab, select [Expo.comp./AEB], then press <0>. the AEB range.
A Locking the ExposureN You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the picture. This is called AE lock. It is effective for shooting backlit subjects, etc. 1 Focus on the subject. Press the shutter button halfway. X The exposure setting will be displayed. the button (0).
D Using the Built-in Flash In indoor, low light, or backlit conditions in daylight, just raise the built-in flash and press the shutter button to easily take beautiful pictures. In the mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake. 1 Press the button. In Creative Zone modes, you can press the button anytime to take flash pictures.
118
6 Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. If you handhold the camera and shoot while viewing the LCD monitor, camera shake may cause blurred images. Using a tripod is recommended in such cases. Remote Live View Shooting With EOS Utility (EOS software, p.158) installed on your computer, you can connect the camera to the computer and shoot remotely while viewing the computer screen.
A Shooting with the LCD Monitor 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. In the mode, the scene icon for the scene detected by the camera is displayed on the upper left of the screen. The Live View image will be displayed in the brightness level closely matching that of the actual image to be captured. on the subject. 2 Focus When you press the shutter button halfway, the camera will focus with the current AF method (p.127).
A Shooting with the LCD Monitor 3 Enabling Live View Shooting Set [z4: Live View shoot.] (the [z1] tab in Basic Zone modes) to [Enable]. Number of Possible Shots with Live View Shooting (Approx. number of shots) Temperature Room Temperature (23°C / 73°F) Low Temperatures (0°C / 32°F) No Flash 290 260 50% Flash Use 260 240 The figures above are based on a fully-charged Battery Pack LP-E17 and CIPA (Camera & Imaging Products Association) testing standards.
A Shooting with the LCD Monitor Information Display Each time you press the button, the information display will change.
U Shooting with Creative Filter EffectsN While viewing the Live View image, you can apply one of seven filter effects (Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect) for shooting. The camera saves only the image with the Creative filter applied. You can also take a picture without a Creative filter, then apply an effect afterward and save it as a new image. the Mode Dial to a Creative 1 Turn Zone mode. the button (7).
U Shooting with Creative Filter EffectsN the filter effect. 5 Adjust Press the button (except for c). Press the keys to adjust the effect, then press <0>. the picture. 6 Take X The image is shot with the filter effect applied.
Changing the Autofocus OperationN You can select the AF (autofocus) operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. the button. 1 Press X The Quick Control screen will appear. [X]. 2 Select Press the keys to select [X] (AF operation) on the left side of the screen. the AF operation. 3 Select Press the keys to select the desired AF operation, then press <0>.
Changing the Autofocus OperationN One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture. When the drive mode is set to for continuous shooting, the maximum continuous shooting speed is approx. 5.0 shots/sec.
3 Focusing with AF Selecting the AF Method You can select an AF method to suit the shooting conditions and your subject. The following AF methods are provided: [u(face)+Tracking] (p.128), [Smooth zone] (p.129), and [Live 1-point AF] (p.131). If you want to achieve precise focus, set the lens’s focus mode switch to , magnify the image, and focus manually. Select the AF method. Under the [z5] tab (the [z2] tab in Basic Zone modes), select [AF method]. Select the desired AF method, then press <0>.
3 Focusing with AF u(face)+Tracking: c The camera detects and focuses on human faces. If a face moves, the AF point
also moves to track the face. 1 Area AF frame Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. X The Area AF frame will appear. the AF point. 2 Check When a face is detected, will appear over the face to be focused on. If multiple faces are detected, will be displayed.
3 Focusing with AF the picture. 4 TakeCheck the focus and exposure, then press the shutter button completely to take the picture (p.120). Focusing on a subject other than a human face If you press the button, the AF point will appear at the screen center, and you can use the cross keys to move the AF point. Once the AF point achieves focus, the AF point will also move to track the subject if you change the composition or if the subject moves.
3 Focusing with AF the AF point. 2 Select Use the cross keys to select a zone. To return to the center zone, press the button. You can also touch the LCD monitor screen to move the Zone AF frame. on the subject. 3 Focus Aim the Zone AF frame over the subject and press the shutter button halfway. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the Zone AF frame will turn orange. the picture.
3 Focusing with AF Live 1-point AF: d The camera focuses with a single AF point. This is effective when you want to focus on a particular subject. the Live View image. 1 Display Press the button. AF point X The Live View image will appear on the LCD monitor. X The AF point < > will appear. During movie shooting, if [Movie Servo AF] is set to [Enable], a larger AF point will be displayed. the AF point. 2 Move Press the cross keys to move the AF point to where you want to focus.
x Shooting with the Touch Shutter Just by tapping on the LCD monitor screen, you can focus and take the picture automatically. 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. the Touch Shutter. 2 Enable Tap [y] on the screen’s bottom left. Each time you tap on the icon, it will toggle between [y] and [x]. [x] (Touch Shutter: Enable) The camera will focus on the spot you tap on, then the picture will be taken.
g Taking a Self Portrait (Selfie) The Self Portrait mode processes the image to suit human subjects. In this mode, you can also adjust the background blur and brightness when shooting. 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. the LCD monitor toward the 2 Face front of the camera. As shown in the illustration, flip out the LCD monitor and face it toward the front of the camera (p.34). [g] on the screen. 3 TapEnable the self portrait.
g Taking a Self Portrait (Selfie) When using the shutter button: Press the shutter button halfway to focus, then press it completely to take the picture.
7 Shooting Movies Movie shooting is enabled by setting the power switch to . For cards that can record movies, see page 8. If you handhold the camera and shoot movies, camera shake can cause blurred movies. In such a case, using a tripod is recommended. Full HD 1080 Full HD 1080 indicates compatibility with HighDefinition featuring 1080 vertical pixels (scanning lines).
k Shooting Movies Connecting the camera to a TV set is recommended to play back the shot movies. Autoexposure Shooting When the shooting mode is set to any mode other than , autoexposure control will take effect to suit the scene’s current brightness. 1 Set the power switch to . X The reflex mirror will make a sound, then the image will appear on the LCD monitor. the Mode Dial to a mode other 2 Set than <8>, , or . on the subject. 3 Focus Before shooting a movie, focus with AF (p.
k Shooting Movies Information Display Each time you press the button, the information display will change.
3 Setting the Movie Recording Size With [z1: Movie rec. size], you can set the movie recording size (image size, frame rate, and compression method) and other functions. Movies will be recorded in the MP4 format. Image size L 1920x1080 Full High-Definition (Full HD) recording quality. The aspect ratio is 16:9. w 1280x720 High-Definition (HD) recording quality. The aspect ratio is 16:9. x 640x480 Standard-definition recording quality. The aspect ratio is 4:3. Frame rate (fps: frame per second) 6 29.
3 Setting the Movie Recording Size Compression method X IPB (Standard) Compresses multiple frames at a time efficiently for recording. Xv IPB (Light) Since the movie is recorded at a low bit rate for playback on various devices, the file size will be smaller than with IPB (Standard). Therefore, you can shoot longer than with IPB (Standard). Do not hold the camera in the same position for long periods of time.
140
8 Handy Features Geotagging Images (p.142) Disabling the Beeper (p.145) Card Reminder (p.145) Setting the Image Review Time (p.146) Setting the Auto Power Off Time (p.146) Reverting the Camera to the Default Settings (p.
3 Geotagging Images Using the GPS Receiver GP-E2 (sold separately) or a Bluetoothcompatible smartphone, you can append location information to images. When Using GP-E2 1 Attach the GP-E2 to the camera. Attach the GP-E2 to the camera’s hot shoe (p.21) and turn it on. For details, refer to the GP-E2 Instruction Manual. [GPS device settings]. 2 Select Under the [52] tab, select [GPS device settings]. [GPS receiver]. 3 Select Select [GPS receiver] in [Select GPS device]. picture.
3 Geotagging Images When Using a Smartphone The dedicated application Camera Connect (free of charge) must be installed on the smartphone. For details on how to install Camera Connect, refer to the Wi-Fi (Wireless Communication) Function Instruction Manual. Setting up Smartphone on GPS Device Turn on the smartphone’s location information function. 1 Connect. 2 StartTapCamera on the smartphone’s Camera Connect icon to start it. to Bluetooth. 3 Connect Connect the camera and a smartphone via Bluetooth.
3 Geotagging Images [Smartphone]. 5 Select Select [Smartphone] in [Select GPS device]. X Acquiring the location information from the smartphone becomes possible. On the [GPS device settings] screen, select [GPS information display] to check the acquired geotag information (latitude, longitude, elevation, and Coordinated Universal Time: UTC). picture. 6 TakeThethelocation information acquired by the smartphone will be appended to the image.
Handy Features 3 Disabling the Beeper You can prevent the beeper from sounding when focus is achieved, during self-timer shooting, and during touch operations. Under the [53] tab, select [Beep], then press <0>. Select [Disable], then press <0>. To silence the beeper only for touch operations, select [Touch n]. 3 Card Reminder This setting prevents shooting if there is no card in the camera. Under the [z1] tab, select [Release shutter without card], then press <0>. Select [Disable], then press <0>.
Handy Features 3 Setting the Image Review Time You can change how long the image is displayed on the LCD monitor immediately after shooting. If [Off] is set, the image will not be displayed immediately after shooting. If [Hold] is set, the image review will be displayed up until the [Auto power off] time has elapsed. Note that during image review, if you operate any camera controls such as pressing the shutter button halfway, the image review will end.
Handy Features 3 Reverting the Camera to the Default SettingsN The camera’s shooting function settings and menu settings can be reverted to their defaults. This option is available in Creative Zone modes. 1 Select [Clear settings]. Under the [54] tab, select [Clear settings], then press <0>. [Clear all camera settings]. 2 Select Select [Clear all camera settings], then press <0>. [OK]. 3 Select Select [OK], then press <0>.
148
9 Image Playback This chapter describes the basic procedures to play back the captured images and movies. Images shot and saved with another device The camera may not be able to properly display images captured with a different camera, edited with a computer, or that have had their file names changed.
x Searching for Images Quickly H Display Multiple Images on One Screen (Index Display) Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen. 1 Play back the image. When you press the button, the last image captured will be displayed. to the index display. 2 Switch Press the button. X The 4-image index display will appear. The selected image is highlighted with an orange frame.
x Searching for Images Quickly I Jumping through Images (Jump Display) In the single-image display, you can turn the <6> dial to jump through the images forward or backward according to the jump method set. 1 Select [Image jump w/6]. Under the [x2] tab, select [Image jump w/6], then press <0>. the jump method. 2 Select Press the cross keys to select the jump method, then press <0>. by jumping. 3 Browse Press the button to play back images. In the single-image display, turn the <6> dial.
d Playing Back with the Touch Screen The LCD monitor is a touch-sensitive panel that you can touch with your fingers for various playback operations. First, press the button to play back images. Browsing Images Swipe with one finger. With single-image display, touch the LCD monitor with one finger. You can browse to the next or previous image by swiping your finger to the left or right. Swipe to the left to see the next (newer) image, or swipe to the right to see the previous (older) image.
d Playing Back with the Touch Screen Reducing Image (Index Display) Pinch two fingers. Touch the screen with two fingers spread apart, and pinch your fingers together on the screen. Each time you pinch your fingers, the single-image display will change to the index display. When you select an image, the orange frame will appear. Tap on the image again to display it as a single image. Magnifying Image Spread two fingers apart.
k Playing Back Movies 1 Play back the image. Press the button to display an image. a movie. 2 Select Press the keys to select the movie to be played back. In the single-image display, the icon displayed on the upper left indicates a movie. If the movie is a video snapshot, will be displayed. In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played back from the index display, press <0> to switch to the singleimage display.
k Playing Back Movies Movie Playback Panel Item Playback Operations 7 Play Pressing <0> toggles between playback and stop. 8 Slow motion Adjust the slow motion speed by pressing the keys. The slow motion speed is indicated on the upper right of the screen. 5 First frame Displays the movie’s first frame. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie. 6 Next frame Plays the movie frame-by-frame each time you press <0>.
L Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing an image shot in RAW+JPEG will erase both the RAW and JPEG images. Erasing a Single Image 1 Play back the image to be erased. the button.
10 Software Start Guide / Downloading Images to a Computer This chapter describes the following: Overview of the software for EOS DIGITAL cameras How to download and install the software on a computer How to download and view the Software Instruction Manuals (PDF files) How to download images from the camera to a computer 157
Software Start Guide Software Overview This section describes an overview of various software applications for EOS DIGITAL cameras. An Internet connection is required to download and install the software. Download and installation are not possible in environments with no Internet connection. EOS Utility With the camera connected to a computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer.
Software Start Guide Downloading and Installing the Software Do not connect the camera to a computer before you install the software. The software will not be installed correctly. Even if a previous version of the software is installed on your computer, follow the procedure below to install the latest version. (The previous version will be overwritten.) 1 Download the software. Connect to the Internet from a computer and access the following Canon Web site. www.canon.
Downloading and Viewing the Software Instruction Manuals (PDF Files) Internet connection is required to download the Software Instruction Manuals (PDF files). Download is not possible in environments with no Internet connection. 1 Download the Software Instruction Manuals (PDF files). Connect to the Internet and access the following Canon Web site. www.canon.com/icpd 2 View the Software Instruction Manuals (PDF files). Double-click a downloaded Instruction Manual (PDF file) to open it.
Downloading Images to a Computer You can use EOS software to download images from the camera to a computer. There are two ways to do this. Downloading by Connecting the Camera to the Computer 1 Install the software (p.159). an interface cable (sold 2 Use separately) to connect the camera to the computer. Connect the cable to the camera’s digital terminal with the cable plug’s icon facing the front of the camera. Connect the cord’s plug to the computer’s USB terminal.
Downloading Images to a Computer Downloading Images with a Card Reader You can use a card reader to download images to a computer. Install the software (p.159). 1 the card into the card 2 Insert reader. Digital Photo Professional to 3 Use download the images. Refer to the Digital Photo Professional Instruction Manual. When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Third party software This product includes third party software. expat.
Use of Genuine Canon Accessories Is Recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Digital Camera Model DS126671 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. For CA, USA only Included lithium battery contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
168
Index Numerics Black-and-white images ............... 104 10- or 2-sec. self-timer ....................98 Bracketing .................................... 115 1280x720 (movie) .........................138 Built-in flash.................................. 117 1920x1080 (movie) .......................138 C 640x480 (movie) ...........................138 C (Creative Auto) ......................... 69 9-point AF auto selection ................94 Cable ............................................
Index Dragging .........................................58 Drive mode ...............................23, 96 E Hot shoe......................................... 21 I Image review time ........................ 146 Erasing images .............................156 Image-recording quality................ 100 Exposure compensation ...............114 File size.........................................101 Images Erasing..................................... 156 Index display............................
Index Face+Tracking..........................128 Information display ...................122 Live 1-point AF .........................131 Possible shots ..........................121 Smooth zone ............................129 Long exposure noise reduction.....108 M N Night Portrait .................................. 80 Night scenes............................. 80, 81 Noise reduction High ISO speed........................ 107 Long exposures ....................... 108 Nomenclature ........................
Index Recharging .....................................30 Shutter button................................. 44 Reduced display ...........................150 Shutter-priority AE........................ 111 Release shutter without card ........145 Single shooting............................... 96 S Single-image display ...................... 89 Scene Intelligent Auto.....................64 Single-point AF...............................
The descriptions in this Instruction Manual are current as of April 2017. For information on the compatibility with any products introduced after this date, contact any Canon Service Center. For the latest version Instruction Manual, refer to the Canon Web site.
English Wi-Fi (Wireless Communication) Function Basic Instruction Manual In Wi-Fi (Wireless Communication) Function Basic Instruction Manual, basic operation procedures for easy-to-use “Communicate with a smartphone” are explained.
Introduction What You Can Do Using the Wi-Fi (Wireless Communication) Functions (1) Communicate with a smartphone (2) Send images between cameras (CANON iMAGE GATEWAY) (6) Send images to a Web service (5) Print images using a Wi-Fi printer (3) Save images to Canon Connect Station (4) Operate remotely using EOS Utility Before Using This Camera Note that Canon cannot be held liable for any loss or damage from erroneous wireless communication settings when using the camera.
Introduction (1) q Communicate with a smartphone (p.W-9) Connect the camera to a smartphone or tablet via Wi-Fi and use the dedicated application “Camera Connect” to operate the camera remotely or view images stored in the camera. In this manual and on the camera’s LCD monitor, “smartphone” refers to smartphones and tablets. (2) z Send images between cameras Connect this camera and other Canon cameras with built-in wireless communication functions via Wi-Fi and send images between them.
Contents Introduction W-2 What You Can Do Using the Wi-Fi (Wireless Communication) Functions...................................................................................... W-2 Getting Started 1 W-5 Setting Wi-Fi Settings ................................................................... W-6 Connecting to a Smartphone via Wi-Fi 2 W-9 Selecting the Wi-Fi Connection Method ..................................... W-10 Preparation for Smartphones ..................................................
1 Getting Started This section describes how to prepare a Bluetooth connection or Wi-Fi connection.
Setting Wi-Fi Settings First, follow the steps below to set the Wi-Fi settings. 1 Press the button. 2 Select [Wi-Fi settings]. 3 Select [Wi-Fi]. 4 Select [Enable]. You can also set the Wi-Fi settings with [Wi-Fi settings] under [51: Wireless communication settings].
Setting Wi-Fi Settings [Nickname]. 5 Register When the screen on the left appears, press <0>. The screen on the left will appear. When using the displayed nickname, press the button. Otherwise, enter any characters between 1 to 8 characters in length. When you finish entering characters, press the button. the setting. 6 Exit When the screen on the left appears, select [OK], then press <0>.
W-8
2 Connecting to a Smartphone via Wi-Fi This section describes how to directly connect the camera to a smartphone via Wi-Fi. Connecting to a smartphone via Wi-Fi enables you to perform the following: • View images stored in the camera on a smartphone or save viewed images to a smartphone. • Operate the camera to take a picture or change camera settings using a smartphone. • Send images to a smartphone from the camera.
Selecting the Wi-Fi Connection Method You can select the following Wi-Fi connection methods according to the functions and usage status of the smartphone. Connecting to a Bluetooth-compatible Smartphone via Wi-Fi (p.W-12) By connecting to a Bluetooth-compatible smartphone via Bluetooth in advance, you can connect via Wi-Fi simply by performing an operation on the camera and smartphone. Connecting to an NFC-compatible Smartphone via Wi-Fi (p.
Preparation for Smartphones To connect the camera to a smartphone, a smartphone on which Android or iOS is installed is necessary. In addition, the dedicated application Camera Connect (free of charge) must be installed on the smartphone. When an NFC-compatible smartphone is touched to the camera before installing Camera Connect, the download screen of Camera Connect will be displayed on the smartphone. Camera Connect can be installed from the Google Play or App Store.
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi This section describes how to use the Bluetooth function to connect to a Bluetooth-compatible smartphone via Wi-Fi. Bluetooth Connection When you connect the camera to a Bluetooth-compatible smartphone via Bluetooth, you can establish a Wi-Fi connection by operating only the camera or the smartphone. Note that pairing between the camera and smartphone is required to connect the camera to a smartphone via Bluetooth.
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Establishing a Bluetooth Connection Operation on the Camera-1 1 Select the [Function settings] tab. Press the button to display the main tabs. Select the [Function settings] tab, then press <0>. [Wireless communication 2 Select settings]. Under the [51] tab, select [Wireless communication settings], then press <0>. 3 Select [Bluetooth function]. 4 Select [Bluetooth function].
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi 5 Select [Smartphone]. 6 Select [Pairing]. [Do not display]. 7 Select If Camera Connect is already installed, select [Do not display] and press <0>. If Camera Connect is not installed, select [Android] or [iOS] on the screen on the left, scan the displayed QR code with the smartphone, then access Google Play or the App Store and install Camera Connect. The screen on the left will appear and pairing will start.
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Operation on the Smartphone the Bluetooth function. 8 Enable Enable the Bluetooth function on the settings screen of the smartphone. Camera Connect. 9 Start Tap on the Camera Connect icon to start the application. the camera to pair with. 10 Select Tap on the nickname of the camera to be paired. If you are using an Android smartphone, proceed to step 12. on [Pair] (iOS only). 11 Tap When the screen on the left appears, tap on [Pair].
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Operation on the Camera-2 12 Select [OK]. <0>. 13 Press Pairing will complete and the camera will be connected to the smartphone via Bluetooth. An illustration indicating that a Bluetooth connection has been established will appear on the main window of Camera Connect. With a Bluetooth connection established, you can operate the camera to send images to the smartphone. For details, see page W-31.
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Establishing a Wi-Fi Connection When a Bluetooth connection is established, follow the steps below to establish a Wi-Fi connection. Android 1 Select a Camera Connect function. Select the Camera Connect function you want to use. For the Camera Connect functions, see page W-29. A Wi-Fi connection will be established automatically. When a Wi-Fi connection is established, the screen for the selected function will appear.
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi iOS 1 Select a Camera Connect function. Select the Camera Connect function you want to use. For the Camera Connect functions, see page W-29. SSID (network name) the SSID and password. 2 Check Check the SSID (network name) and password displayed on the camera. Password the smartphone to 3 Operate establish a Wi-Fi connection. On the smartphone’s Wi-Fi function screen, select the SSID checked in step 2.
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi The [qWi-Fi on] screen will appear on the camera’s LCD monitor. An illustration indicating that a Wi-Fi connection has been established will appear on the main window of Camera Connect. The Wi-Fi connection to a Bluetooth-compatible smartphone is now complete. For how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” (p.W-30). Terminating the Wi-Fi connection will switch the camera to the Bluetooth connection.
Connecting to an NFC-compatible Smartphone via Wi-Fi An NFC-compatible smartphone can be connected via Wi-Fi by touching it to the camera. This section describes how to connect to an NFC-compatible smartphone via Wi-Fi. Smartphones labeled with the p mark are NFC-compatible. Some smartphones are NFC-compatible even if they are not labeled with the p mark. In such a case, check the NFC antenna position by referring to the smartphone’s instruction manual.
Connecting to an NFC-compatible Smartphone via Wi-Fi Establishing a Wi-Fi Connection the NFC function on the 1 Enable camera and smartphone. a smartphone to the 2 Touch camera. If the download site of Camera Connect appears on the smartphone, install Camera Connect (p.W-29). If an image is being played back on the camera, press the <3> button to end the playback. Touch the p mark on the smartphone to that on the camera so that they come into contact with each other.
Connecting to an NFC-compatible Smartphone via Wi-Fi a Wi-Fi connection. 3 Establish When a connection is established, the screen on the left will appear on the camera’s LCD monitor. When connecting to the same smartphone via NFC, this screen will not appear again. If you select [OK] and press <0>, a message indicating that the connection has been established is displayed and the [qWi-Fi on] screen is displayed.
Connecting to an NFC-compatible Smartphone via Wi-Fi The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect. See page W-29. For how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” (p.W-30). [qWi-Fi on] Screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings.
Connecting to a Smartphone via Wi-Fi with the Button Operation on the Camera-1 1 Press the button. [q] (Connect to 2 Select smartphone). If the history (p.W-38) is displayed, switch the screen with the keys. [Register a device for 3 Select connection].
Connecting to a Smartphone via Wi-Fi with the Button [Do not display]. 4 Select If Camera Connect is already installed, select [Do not display] and press <0>. If Camera Connect is not installed, select [Android] or [iOS] on the screen on the left, scan the displayed QR code with the smartphone, then access Google Play or the App Store and install Camera Connect. SSID (network name) the SSID and password. 5 Check Check the SSID (network name) and password displayed on the camera’s LCD monitor.
Connecting to a Smartphone via Wi-Fi with the Button Operation on the Smartphone Smartphone’s screen (sample) the smartphone to 6 Operate establish a Wi-Fi connection. Activate the smartphone’s Wi-Fi function, then select the SSID (network name) checked in step 5. For the password, enter the password checked in step 5. Camera Connect. 7 Start When the [Waiting to connect] screen is displayed on the camera’s LCD monitor, start Camera Connect on the smartphone.
Connecting to a Smartphone via Wi-Fi with the Button Operation on the Camera-2 a Wi-Fi connection. 9 Establish When a connection is established, the screen on the left will appear on the camera’s LCD monitor. If you select [OK] and press <0>, a message indicating that the connection has been established is displayed and the [qWi-Fi on] screen is displayed.
Connecting to a Smartphone via Wi-Fi with the Button The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect. See page W-29. For how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” (p.W-30). [qWi-Fi on] Screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings.
Operating the Camera Using a Smartphone You can use a smartphone with Camera Connect installed to view images stored in the camera or perform remote shooting, etc. Camera Connect Main Window The main functions of Camera Connect are described below. Images on camera Images stored in the camera can be viewed. Images stored in the camera can be saved on a smartphone. Operations such as deletion can be performed on images stored in the camera.
Terminating the Wi-Fi Connection To terminate the Wi-Fi connection, perform either of the following operations. On the smartphone’s Camera Connect screen, tap on [ ]. On the camera’s [qWi-Fi on] screen, select [Disconnect,exit]. If the [qWi-Fi on] screen is not displayed, press the button. Select [Disconnect,exit], then select [OK] on the confirmation dialog to terminate the Wi-Fi connection.
Sending Images to a Smartphone from the Camera You can use the following methods to send images to a smartphone from the camera. (1) Selecting [Send images to smartphone] to send images (2) Sending images from the Quick Control screen during playback (p.W-33) (3) Using the NFC function to send images during image playback (p.W-35) (1) Selecting [Send images to smartphone] to Send Images Select [Send images to smartphone] from the camera menu and send images.
Sending Images to a Smartphone from the Camera an image to send. 4 Select Press the keys of the cross keys to select an image to send, then press <0>. By pressing the button, you can switch to the index display and select an image. [Send img shown]. 5 Select To select a size at which to send the image, select [Resize image] and press <0>. Select [Send img shown] and press <0> to send the image displayed. When the transfer is complete, the screen for step 4 will reappear.
Sending Images to a Smartphone from the Camera (2) Sending Images from the Quick Control Screen During Playback Send images from the Quick Control screen during playback. 1 Connect the camera to a smartphone via Bluetooth (Android only) or Wi-Fi (p.W-17). back the image. 2 Play Press the <3> button to play back images. the button. 3 Press The Quick Control screen will appear. [q].
Sending Images to a Smartphone from the Camera an image to send. 5 Select Press the keys of the cross keys to select an image to send, then press <0>. By pressing the button, you can switch to the index display and select an image. [Send img shown]. 6 Select To select a size at which to send the image, select [Resize image] and press <0>. Select [Send img shown] and press <0> to send the image displayed. When the transfer is complete, the screen for step 5 will reappear.
Sending Images to a Smartphone from the Camera (3) Using the NFC Function to Send Images During Image Playback By touching an NFC-compatible smartphone to the camera while playing back an image on the camera, you can establish a Wi-Fi connection automatically and send the image to the smartphone even if a Bluetooth or Wi-Fi connection has not been established beforehand. 1 Play back the image. Press the <3> button to play back images. a smartphone to the 2 Touch camera.
Sending Images to a Smartphone from the Camera [Send img shown]. 4 Select To select a size at which to send the image, select [Resize image] and press <0>. Select [Send img shown] and press <0> to send the image displayed. When the transfer is complete, the screen for step 3 will reappear. To send another image, repeat steps 3 and 4.
3 Reconnecting via Wi-Fi This section describes how to reconnect the camera to a Smartphone for which you have already established a Wi-Fi connection.
Reconnecting via Wi-Fi Reconnect the camera via Wi-Fi to a Smartphone that you have connected to and registered connection settings for in the past. 1 Press the button. an item. 2 Select Select the item to connect to via Wi-Fi from the displayed history. If the item is not displayed, press the keys to switch the screen. After selecting the item, press <0>. 3 Operate the connected device. Activate the smartphone’s Wi-Fi function, then start Camera Connect.
Connecting to a Bluetooth-connected Smartphone via Wi-Fi With a Bluetooth connection established between the camera and a smartphone, follow the steps below to reconnect to the smartphone via Wi-Fi. Android 1 Start Camera Connect. Tap on the Camera Connect icon on the smartphone to start the application. a Camera Connect 2 Select function. Select the Camera Connect function you want to use. A Wi-Fi connection will be automatically established.
Connecting to a Bluetooth-connected Smartphone via Wi-Fi iOS 1 Start Camera Connect. a Camera Connect 2 Select function. the SSID. 3 Check Check the camera’s SSID (network name) displayed on the smartphone. Smartphone’s screen (sample) the smartphone to 4 Operate establish a Wi-Fi connection. On the smartphone’s Wi-Fi function screen, select the SSID checked in step 3. “_Canon0A” is displayed at the end of the SSID. Display the Camera Connect screen.
Wireless Communication Function Precautions 9Countries and Regions Permitting Wireless Communication Function Use Use of wireless communication functions is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating wireless communication function regulations, visit the Canon Web site to check where use is allowed.
Hereby, Canon Inc., declares that this DS126671 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.canon-europe.com/ce-documentation Wi-Fi Frequency range: 2401 MHz - 2473 MHz 13.64 dBm Wi-Fi Maximum output power: Bluetooth Frequency range: 2402 MHz - 2480 MHz Bluetooth Maximum output power: 7.14 dBm CANON EUROPA N.V.
Index A Android ...................................... W-11 B Bluetooth .................................. W-13 C Camera Connect ............. W-11, W-29 Communicating with a smartphone ....................... W-9 I iOS ............................................ W-11 N NFC ........................................... W-20 Nickname .................................... W-7 P Pairing ....................................... W-14 Q Quick Control ............................ W-33 R Reconnecting ..........
The descriptions in this Instruction Manual are current as of March 2017. For information on the compatibility with any products introduced after this date, contact any Canon Service Center. For the latest version Instruction Manual, refer to the Canon Web site.
CPB-L503-000 © CANON INC.
() 6 PP I ,6 670 (1* Instructions
7KDQN \RX IRU SXUFKDVLQJ D &DQRQ SURGXFW 7KH &DQRQ () 6 PP I ,6 670 LV D VWDQGDUG ]RRP OHQV IRU (26 FDPHUDV WKDW VXSSRUW () 6 OHQVHV 7KH OHQV FDQ RQO\ EH XVHG ZLWK FRPSDWLEOH (26 FDPHUDV )RU FRPSDWLELOLW\ LQIRUPDWLRQ SOHDVH FKHFN WKH FDPHUD¶V LQVWUXFWLRQ PDQXDO SURGXFW FDWDORJ RU WKH &DQRQ ZHEVLWH &DPHUD )LUPZDUH ● 3OHDVH XVH WKH ODWHVW YHUVLRQ RI ¿UPZDUH ZLWK WKH FDPHUD LQ XVH )RU GHWDLOV RQ ZKHWKHU WKH ¿UPZDUH LV WKH ODWHVW YHUVLRQ RU QRW DQG IRU GHWDLOV RQ XSGDWLQJ WKH ¿UPZD
6DIHW\ 3UHFDXWLRQV 3UHFDXWLRQV WR HQVXUH WKDW WKH FDPHUD LV XVHG VDIHO\ 5HDG WKHVH SUHFDXWLRQV WKRURXJKO\ 0DNH VXUH DOO GHWDLOV DUH REVHUYHG LQ RUGHU WR SUHYHQW ULVNV DQG LQMXU\ WR WKH XVHU DQG RWKHU SHRSOH :DUQLQJ 'HWDLOV SHUWDLQLQJ WR ULVNV WKDW PD\ UHVXOW LQ GHDWK RU VHULRXV LQMXU\ ● 'R QRW ORRN DW WKH VXQ RU D EULJKW OLJKW VRXUFH WKURXJK WKH OHQV RU VLQJOH OHQV UHIOH[ FDPHUD 'RLQJ VR FRXOG UHVXOW LQ ORVV RI YLVLRQ /RRNLQJ DW WKH VXQ GLUHFWO\ WKURXJK WKH OHQV LV HVSHFLDOO\ KD]DUGRXV ● :KH
*HQHUDO 3UHFDXWLRQV +DQGOLQJ 3UHFDXWLRQV ● ,I WKH OHQV LV WDNHQ IURP D FROG HQYLURQPHQW LQWR D ZDUP RQH FRQGHQVDWLRQ PD\ GHYHORS RQ WKH OHQV VXUIDFH DQG LQWHUQDO SDUWV 7R SUHYHQW FRQGHQVDWLRQ LQ WKLV FDVH ¿UVW SXW WKH OHQV LQWR DQ DLUWLJKW SODVWLF EDJ EHIRUH WDNLQJ LW IURP D FROG WR ZDUP HQYLURQPHQW 7KHQ WDNH RXW WKH OHQV DIWHU LW KDV ZDUPHG JUDGXDOO\ 'R WKH VDPH ZKHQ WDNLQJ WKH OHQV IURP D ZDUP HQYLURQPHQW LQWR D FROG RQH ● 3OHDVH DOVR UHDG DQ\ OHQV UHODWHG KDQGOLQJ SUHFDXWLRQV OLVWHG LQ \RXU
*HQHUDO 3UHFDXWLRQV 6KRRWLQJ 3UHFDXWLRQV 7KH OHQV XWLOL]HV D VWHSSLQJ PRWRU WR PRYH WKH IRFXV OHQV ZKHQ WKH SRZHU LV VZLWFKHG RQ DQG GXULQJ ]RRPLQJ ,QLWLDO IRFXV OHQV UHVHWWLQJ RSHUDWLRQV 7KH OHQV SHUIRUPV DQ LQLWLDO UHVHW RI WKH IRFXV OHQV ZKHQ WKH FDPHUD LV VZLWFKHG RQ :KHQ WKH OHQV LV DWWDFKHG WR WKH IROORZLQJ FDPHUDV DQ LQLWLDO UHVHW ZLOO EH SHUIRUPHG DV ZKHQ RSHUDWLRQ LV UHVXPHG IURP DQ DXWR SRZHU RII VWDWH ● 7KH OHQV ZLOO PRYH LQ DQG RXW RI IRFXV GXULQJ LQLWLDO UHVHW /HQV VOHHS PRGH
7KLV GHYLFH FRPSOLHV ZLWK 3DUW RI WKH )&& 5XOHV 2SHUDWLRQ LV VXEMHFW WR WKH IROORZLQJ WZR FRQGLWLRQV 7KLV GHYLFH PD\ QRW FDXVH KDUPIXO LQWHUIHUHQFH DQG WKLV GHYLFH PXVW DFFHSW DQ\ LQWHUIHUHQFH UHFHLYHG LQFOXGLQJ LQWHUIHUHQFH WKDW PD\ FDXVH XQGHVLUHG RSHUDWLRQ 'R QRW PDNH DQ\ FKDQJHV RU PRGL¿FDWLRQV WR WKH HTXLSPHQW XQOHVV RWKHUZLVH VSHFL¿HG LQ WKH LQVWUXFWLRQV ,I VXFK FKDQJHV RU PRGL¿FDWLRQV VKRXOG EH PDGH \RX FRXOG EH UHTXLUHG WR VWRS RSHUDWLRQ RI WKH HTXLSPHQW 7KLV HTXLSPHQW KDV
1RPHQFODWXUH )RFXV PRGH VZLWFK ĺ +RRG PRXQW ĺ =RRP SRVLWLRQ LQGH[ ĺ )LOWHU PRXQWLQJ WKUHDG ĺ )RFXVLQJ ULQJ ĺ =RRP ULQJ ĺ ,PDJH VWDELOL]HU VZLWFK ĺ &RQWDFWV ĺ /HQV PRXQW LQGH[ ĺ ● )RU GHWDLOHG LQIRUPDWLRQ UHIHUHQFH SDJH QXPEHUV DUH SURYLGHG LQ SDUHQWKHVHV o (1*
1 0RXQWLQJ DQG 'HWDFKLQJ WKH /HQV 2 6HWWLQJ WKH )RFXV 0RGH 6HH \RXU FDPHUD¶V LQVWUXFWLRQV IRU GHWDLOV RQ PRXQWLQJ DQG GHWDFKLQJ WKH OHQV ● $IWHU GHWDFKLQJ WKH OHQV SODFH WKH OHQV ZLWK WKH UHDU HQG XS WR SUHYHQW WKH OHQV VXUIDFH DQG FRQWDFWV IURP JHWWLQJ VFUDWFKHG ● &RQWDFWV WKDW DUH VFUDWFKHG VRLOHG RU KDYH ¿QJHUSULQWV RQ WKHP PD\ UHVXOW LQ IDXOW\ FRQQHFWLRQV RU FRUURVLRQ ZKLFK PD\ OHDG WR PDOIXQFWLRQV ,I WKH FRQWDFWV JHW VRLOHG FOHDQ WKHP ZLWK D VRIW FORWK ● $WWDFK WKH OHQV FDS DQG GX
3 =RRPLQJ 7R ]RRP WXUQ WKH OHQV¶ ]RRP ULQJ ● %H VXUH WR ¿QLVK ]RRPLQJ EHIRUH IRFXVLQJ =RRPLQJ DIWHU IRFXVLQJ FDQ DIIHFW WKH IRFXV ● %OXUULQJ PD\ WHPSRUDULO\ RFFXU LI WKH ]RRP ULQJ LV TXLFNO\ URWDWHG ● 7KH OHQV ZLOO PRYH LQ DQG RXW RI IRFXV LI WKH ]RRP ULQJ LV URWDWHG ZKHQ WKH FDPHUD LV 2)) ● =RRPLQJ GXULQJ VWLOO LPDJH H[SRVXUH ZLOO UHVXOW LQ GHOD\HG IRFXV 7KLV FDXVHV DQ\ VWUHDNV RI OLJKW WKDW DUH FDSWXUHG GXULQJ H[SRVXUH WR EH EOXUUHG 4 +RRG VROG VHSDUDWHO\ 7KH (: & KRRG FXWV RXW XQZDQ
5 ,PDJH 6WDELOL]HU
,PDJH 6WDELOL]HU 7KH LPDJH VWDELOL]HU IRU WKLV OHQV LV HIIHFWLYH IRU KDQG KHOG VKRWV LQ WKH IROORZLQJ FRQGLWLRQV ON ON OFF ● ,Q VHPL GDUNHQHG DUHDV VXFK DV LQGRRUV RU RXWGRRUV DW QLJKW ● ,Q ORFDWLRQV ZKHUH ÀDVK SKRWRJUDSK\ LV SURKLELWHG VXFK DV DUW PXVHXPV DQG WKHDWHU VWDJHV ● ,Q VLWXDWLRQV ZKHUH \RXU IRRWLQJ LV XQFHUWDLQ ● ,Q VLWXDWLRQV ZKHUH IDVW VKXWWHU VHWWLQJV FDQQRW EH XVHG OFF ● :KHQ SDQQLQJ VXEMHFWV LQ PRWLRQ (1*
6 )LOWHUV VROG VHSDUDWHO\
6SHFL¿FDWLRQV )RFDO /HQJWK $SHUWXUH /HQV &RQVWUXFWLRQ 0LQLPXP $SHUWXUH $QJOH RI 9LHZ 0LQ )RFXVLQJ 'LVWDQFH 0D[ 0DJQLILFDWLRQ )LHOG RI 9LHZ )LOWHU 'LDPHWHU 0D[ 'LDPHWHU DQG /HQJWK :HLJKW +RRG /HQV &DS &DVH PP I JURXSV HOHPHQWV I 'LDJRQDO ƍ ƍ 9HUWLFDO ƍ ƍ +RUL]RQWDO ƍ ƍ P IW [ DW PP $SSUR[ [ ± [ PP [ ± [ LQFK DW P IW PP [ PP [ LQFK $SSUR[ J
2QO\ IRU (XURSHDQ 8QLRQ DQG (($ 1RUZD\ ,FHODQG DQG /LHFKWHQVWHLQ 7KLV V\PERO LQGLFDWHV WKDW WKLV SURGXFW LV QRW WR EH GLVSRVHG RI ZLWK \RXU KRXVHKROG ZDVWH DFFRUGLQJ WR WKH :((( 'LUHFWLYH (8 DQG QDWLRQDO OHJLVODWLRQ 7KLV SURGXFW VKRXOG EH KDQGHG RYHU WR D GHVLJQDWHG FROOHFWLRQ SRLQW H J RQ DQ DXWKRUL]HG RQH IRU RQH EDVLV ZKHQ \RX EX\ D QHZ VLPLODU SURGXFW RU WR DQ DXWKRUL]HG FROOHFWLRQ VLWH IRU UHF\FOLQJ ZDVWH HOHFWULFDO DQG HOHFWURQLF HTXLSPHQW ((( ,PSURSHU KDQGOLQJ RI WKLV W\SH RI
CT1-8614-000 0716Ni © CANON INC.
~1111111111111111111~~11111111 CT1-B007-A ©CANON INC. 2016 PRINTED IN TAIWAN CT1 B007A Canon EF Lens Instructions Mode d'emploi d'Objectif EF Objetivos EF lnstrucciones These instructions describe operation of representative EF lenses. Detailed instructions for your lens can be downloaded from the Canon website below. http://www.canon.com/icpd/ Ces instructions decrivent le fonctionnement des principaux objectifs EF.
Example EF-S lens Nomenclature and Functions Exemple d'objectif EF-S G) Focus mode switch Switch between autofocus (AF) and manual focus (MF). Nomenclature et fonctions G) Selecteur de mode de mise au point Commute entre l'autofocus (AF) et Ia mise au point manuelle (MF). Nomenclatura y funciones G) Interrupter del modo de enfoque Permite cambiar entre el enfoque automatico (AF) y el enfoque manual (MF).
canon REGISTER NOW CANADIANoN°Lv canon REGISTER NOW USAoN°Lv Register Your EOS Camera Now Register Visit www.canon.ca/register ENJOY THE BENEFITS OF REG ISTERING • Receive automatic notification of the most up to date driver. firmware and software upgrades. • Receive the latest product and promotion information from Canon Canada Inc. Your EOS Camera Now Vis it www.registercanon.com or cal l 1-800-0K-Canon {1-800-652-2666) • As a valued customer.
Whe re imagination shapes innovation Ask questions, hove conversations and shore experiences / ~ Become a fa n of the official Conan Focebook page CA~ FoliuMJJJ Taking professional imaging products to the next level /a ............ ,~ EXPLORE. LEARN. CREATE. Discover everything you need to know to step up your imaging game! ~ ~ IJ ' l!J Educational content to help you achieve the best results Follow the Twitter feeds thotmeetyourneeds CONNECT WITH CANON ...
The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon U.S.A.) in the Umted States or Canon Canada Inc. (Canon Canada) in Canada with respect to the Canon brand EOS Digital Camera, as well as with respect to the accessories packaged with this limited warranty (collectively the "Products")', when purchased and used in the United States or Canada. The Products are the only Products to which th is limited warranty applies Your Products.
REMARKS REMARKS Ca;nn.n V Garant" limitee des appare~ls photo numeriques EOS Digital Camera'" et des accessoires de CANON Pour les Etats·Unis et le Canada seulement La prllsente garantie limitee est fournie par Ccmon U SA.Inc. (Canon U.S.A.) au){ Etats-Ur1isou Canon Canada Inc.
