TS-E50mm f/2.8L MACRO TS-E90mm f/2.
Thank you for purchasing a Canon product. The Canon TS-E50mm f/2.8L MACRO, Canon TS-E90mm f/2.8L MACRO, and Canon TS-E135mm f/4L MACRO are tilt-shift lenses* designed for EOS cameras that allow macro shooting up to 0.5 times magnification. Camera Firmware Please use the latest version of firmware with the camera in use. For details on whether the firmware is the latest version or not, and for details on updating the firmware, please check the Canon website.
Safety Precautions Precautions to ensure that the camera is used safely. Read these precautions thoroughly. Make sure all details are observed in order to prevent risks and injury to the user and other people. Warning Details pertaining to risks that may result in death or serious injury. OO Do not look at the sun or a bright light source through the lens or single-lens reflex camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
General Precautions Handling Precautions OO If the lens is taken from a cold environment into a warm one, condensation may develop on the lens surface and internal parts. To prevent condensation in this case, first put the lens into an airtight plastic bag before taking it from a cold to warm environment. Then take out the lens after it has warmed gradually. Do the same when taking the lens from a warm environment into a cold one.
Nomenclature (TS-E50mm f/2.8L MACRO) Tilt scale (→ 15) Tilt index (→ 15) Distance index Distance scale (→ 14, 28) Depth-of-Field scale (→ 28) Lens mount index (→ 14) Tilt knob (→ 15) Contacts Shift knob (→ 19, 30) Shift index (→ 19) Shift scale (→ 19) OO For detailed information, reference page numbers are provided in parentheses (→ **).
Nomenclature (TS-E50mm f/2.8L MACRO) Shift lock knob (→ 19) Rotation lock release button (→ 21) Shift index (→ 19) Lens Filter mounting thread (→ 31) Shift scale (→ 19) Hood mount Focusing ring (→ 14) Tilt scale (→ 15) Tilt index (→ 15) TS rotation lock release button (→ 23) Tilt lock knob (→ 15) Tilt lock button (→ 15) Illustration shows lens viewed from below. OO For detailed information, reference page numbers are provided in parentheses (→ **).
Nomenclature (TS-E90mm f/2.8L MACRO, TS-E135mm f/4L MACRO) Tilt index (→ 17) Tilt scale (→ 17) Distance index Distance scale (→ 14, 28) Depth-of-Field scale (→ 28) Lens mount index (→ 14) Tilt knob (→ 17) Contacts Shift knob (→ 19, 30) Shift index (→ 19) Shift scale (→ 19) The illustration shows TS-E90mm f/2.8L MACRO, with nomenclature being the same for TS-E135mm f/4L MACRO. OO For detailed information, reference page numbers are provided in parentheses (→ **).
Nomenclature (TS-E90mm f/2.8L MACRO, TS-E135mm f/4L MACRO) Shift lock knob (→ 19) Rotation lock release button (→ 21) Shift index (→ 19) Lens Filter mounting thread (→ 31) Shift scale (→ 19) Hood mount Focusing ring (→ 14) Tilt lock button (→ 17) Tilt lock knob (→ 17) Tilt index (→ 17) TS rotation lock release button (→ 23) Tilt scale (→ 17) Illustration shows lens viewed from below. The illustration shows TS-E90mm f/2.8L MACRO, with nomenclature being the same for TS-E135mm f/4L MACRO.
TS-E MACRO Lens Features Canon TS-E50mm f/2.8L MACRO, Canon TS-E90mm f/2.8L MACRO, and Canon TS-E135mm f/4L MACRO have the following features. OO Range of tilt is ±8.5° for TS-E50mm f/2.8L MACRO, and ±10° for TS-E90mm f/2.8L MACRO and TS-E135mm f/4L MACRO. OO Range of shift is ±12 mm. OO Macro shooting at up to 0.5 times magnification when tilted or shifted is possible. OO Rotation allows the direction of the entire lens to be changed.
TS-E MACRO Lens Features OO Before mounting or detaching the lens, or turning the lens for rotation or TS rotation, always lock the lens in a non-tilted and non-shifted position. For how to lock the lens in a non-tilted and non-shifted position, see p.16, p.18, and p.20. OO If using Digital Photo Professional to perform lens correction (lens aberration correction, Digital Lens Optimizer, etc.
The Principle of Tilt and Shift Focusing plane (after tilting) Focusing plane (after shifting) Focusing plane Optical 光軸 axis Optical axis Tilt Imaging plane OO By tilting the lens, the lens’ optical axis is tilted with regard to the imaging plane, allowing the focusing plane to be tilted. Shift Imaging plane Imaging plane OO By shifting the lens, the lens’ optical axis is moved in parallel with regard to the image plane, allowing the focusing plane to be moved in parallel.
Tilt Effect Shooting a field of flowers OO Example 1 OO Tilting as shown has the effect of broadening the depth of field. This allows the entire field, from immediately in front to far in the background, to be in focus. OO Example 2 OO Tilting as shown has the effect of narrowing the depth of field. Only flowers immediately in front are in focus, with the rest of the subject being blurred.
Shift Effect Shooting architecture OO If you photograph a subject such as a building with a normal lens, the top of the building tapers away. But by placing the camera parallel to the building and shifting the lens, you can correct this tapering effect. Shooting a mirror OO When you are shooting a reflective subject, you can move the camera to a position where the camera does not appear in the shot and then use shift to take the picture.
1. Mounting and Detaching the Lens 2. Focusing See your camera’s instructions for details on mounting and detaching the lens. OO Before mounting or detaching the lens, always lock the lens in a non-tilted and non-shifted position. OO After detaching the lens, place the lens with the rear end up to prevent the lens surface and contacts from getting scratched. OO Contacts that are scratched, soiled, or have fingerprints on them may result in faulty connections or corrosion, which may lead to malfunctions.
3. Using Tilt (TS-E50mm f/2.8L MACRO) Tilt lock knob Tilt scale 1 Tilt knob Tilt scale 3 2 Loosen Lock Tilt lock button Tilt index Tilt index Illustration shows TS-E50mm f/2.8L MACRO. To tilt the lens, slide the tilt lock button away from LOCK, and then turn the tilt lock knob counterclockwise to loosen. (Fig. 1) Tilting the lens for shooting Turn the tilt knob to adjust the amount of tilt. The amount of tilt can be adjusted in a range of ±8.5° with the thick line on the tilt scale as a reference.
Using Tilt (TS-E50mm f/2.8L MACRO) Tilt knob Tilt lock knob Thick line on tilt scale Thick line on tilt scale 2 1 Lock Tilt index Tilt lock button Tilt index Illustration shows TS-E50mm f/2.8L MACRO. Locking the Lens in a Non-Tilted Position Turn the tilt knob so that the thick line on the tilt scale is aligned with the tilt index (at a click position). (Fig. 1) Turn the tilt lock knob clockwise to lock. Slide the tilt lock button toward LOCK to lock tilt. (Fig.
Using Tilt (TS-E90mm f/2.8L MACRO, TS-E135mm f/4L MACRO) Tilt lock knob 1 Tilt index Tilt knob Loosen Tilt index 2 3 Lock Tilt lock button Tilt scale Tilt scale Illustration shows TS-E90mm f/2.8L MACRO. Location of features on TS-E90mm f/2.8L MACRO and TS-E135mm f/4L MACRO differ somewhat from TS-E50mm f/2.8L MACRO, but their function and operation is the same. To tilt the lens, slide the tilt lock button away from LOCK, and then turn the tilt lock knob counterclockwise to loosen. (Fig.
Using Tilt (TS-E90mm f/2.8L MACRO, TS-E135mm f/4L MACRO) Tilt knob Tilt lock knob Tilt index 2 1 Thick line on tilt scale Tilt lock button Tilt index Lock Thick line on tilt scale Illustration shows TS-E90mm f/2.8L MACRO. Locking the Lens in a Non-Tilted Position Turn the tilt knob so that the thick line on the tilt scale is aligned with the tilt index (at a click position). (Fig. 1) Turn the tilt lock knob clockwise to lock. Slide the tilt lock button toward LOCK to lock tilt. (Fig.
4. Using Shift Shift scale 1 Shift knob Loosen Lock Shift index Shift index 2 Shift lock knob 3 Shift scale Illustration shows TS-E50mm f/2.8L MACRO. To shift the lens, turn the shift lock knob counterclockwise to loosen. (Fig. 1) Shifting the lens for shooting Turn the shift knob to adjust the amount of shift. The amount of shift can be adjusted in a range of ±12 mm with the thick line on the shift scale as a reference. (Fig. 2) (A shift scale is also located near the shift lock knob.
Using Shift Shift knob Shift index Shift scale 2 1 Thick line on shift scale Locking the Lens in a Non-Shifted Position Lock Shift index Shift lock knob Illustration shows TS-E50mm f/2.8L MACRO. Turn the shift knob so that the thick line on the shift scale is aligned with the shift index (at a click position). (Fig. 1) Turn the shift lock knob clockwise to lock. (Fig. 2) OO For EOS cameras with built-in flash, the lens may contact the camera while you operate the shift function.
5. Using Rotation By using rotation, the direction of the entire lens can be switched. With the lens mounted on the camera, turn the entire lens while pushing the rotation lock release button toward the mount. Rotation lock release button The rotation mechanism can be turned through ±90°. The lens clicks every 30°, and locks in place in the 0° and ±90° positions. Shift directions when rotation is at 0°. Shift directions when rotation is at 90°. Illustration shows TS-E50mm f/2.8L MACRO.
Using Rotation OO Before turning the lens for rotation, always lock the lens in a non-tilted and non-shifted position. OO Note that your fingers may contact the shift lock knob when turning the lens for rotation. OO For EOS cameras with built-in flash, the lens may contact the camera while you operate the rotation function. OO In order to prevent shifts in position while shooting, shooting with rotation locked or at a click position is recommended.
6. Using TS Rotation By using TS rotation, the relationship of the tilt and shift operation directions can be switched from right angle to parallel. With the lens mounted on the camera, turn the tilt mechanism while pressing the TS rotation lock release button toward the mount. TS rotation lock release button The lens clicks at the 45° position, and locks in place in either the right angle or parallel position.
Using TS Rotation OO Before turning the lens for TS rotation, always lock the lens in a non-tilted and non-shifted position. OO When tilt and shift are used together in right-angled operation directions, or only either of tilt or shift is used, vignetting by this lens will not occur. OO When tilt and shift are used together in any operation directions other than right-angled, vignetting may occur in the range indicated in gray as shown in the figure below.
7. TS-E MACRO Lens Exposure Setting Since the optical axis shifts when the lens is tilted or shifted, the exposure value may deviate largely with automatic exposure during viewfinder shooting. Either of the following methods is recommended for obtaining an appropriate exposure setting. Exposure setting by Live View shooting Shoot using a Live View shooting exposure value. Regardless of tilt or shift, you can shoot with automatic exposure, including for macro shots.
TS-E MACRO Lens Exposure Setting OO TS-E50mm f/2.8L MACRO Magnification Effective f/No. Exposure Factor (stops) 1:5 3.3 1/3 1/2 1:3 3.4 2/3 1/2 1:2 3.8 2/3 1 Upper values: 1/3 stops. Lower values: 1/2 stops. 1:3 3.8 2/3 1 1:2 4.3 1 1 Upper values: 1/3 stops. Lower values: 1/2 stops. 1:3 5.2 2/3 1/2 1:2 5.8 1 1 Upper values: 1/3 stops. Lower values: 1/2 stops. OO TS-E90mm f/2.8L MACRO Magnification Effective f/No. Exposure Factor (stops) 1:5 3.
TS-E MACRO Lens Exposure Setting OO Depending on the camera model* and settings, you may not obtain standard exposure or you may obtain uneven exposure. This phenomenon may improve by decreasing the shutter speed. It is recommended that you try shooting while checking results after shooting an image. * • The firmware in the below cameras already corrects this phenomenon. EOS 6D Mark II • Upgrading the firmware in the below cameras will correct this phenomenon.
8. Depth-of-Field Scale Distance scale Depth-of-field scale 9. Infinity Compensation Mark Distance scale Distance index Infinity compensation mark Illustration shows TS-E50mm f/2.8L MACRO. The depth of field is the distance in front of and behind the plane of focus on the subject that appears sharp. The depth of field is indicated by the area between the depth-of-field scale lines below the distance scale. The numbers on the scale are aperture settings.
10. Hood The ES-84 or ET-88 hood cuts out unwanted light and protects the front of the lens from rain, snow, and dust. Attachment position mark Red dot Button Red dot Attachment position mark Red dot Stop position mark OO Attaching To attach the hood, align the hood’s red attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arrow until it clicks. Illustration shows TS-E50mm f/2.8L MACRO.
11. Shift Knob Cap Shifting will be easier if the supplied shift knob cap is mounted (p.19). However, note that for EOS cameras with a built-in flash, the cap may come in contact with the camera when mounting/detaching the lens, shifting the lens, or turning the lens for rotation. Screw (length: 3 mm) Remove the shift knob screw. Mount the cap by squeezing it onto the shift knob, and then fix it in place using the supplied screw.
12. Filters (sold separately) You can attach filters to the filter mounting thread on the front of the lens. OO Only one filter may be attached. OO Use a Canon circular polarizing filter PL-C B. TS-E50mm f/2.8L MACRO and TS-E90mm f/2.8L MACRO: 77mm TS-E135mm f/4L MACRO: 82mm OO Detach the hood when adjusting the polarizing filter. 13. Close-up Lens (sold separately) OO TS-E50mm f/2.8L MACRO Attaching a 500D (77 mm) Close-up Lens enables close-up photography. It provides a magnification of 0.10x to 0.58x.
14. Extension Tubes (sold separately) You can attach extension tube EF12 II or EF25 II for magnified shots. The focusing distance and magnification are shown below. OO TS-E50mm f/2.8L MACRO EF12 II EF25 II Focusing distance (mm) (working distance) Near Far 242 371 (57) (216) 224 256 (44) (101) Magnification (×) Near Far 0.74 0.23 1.00 0.48 OO TS-E90mm f/2.
Extension Tubes (sold separately) OO TS-E135mm f/4L MACRO EF12 II EF25 II Focusing distance (mm) (working distance) Near Far 459 1716 (263) (1521) 443 943 (232) (733) Magnification (×) Near Far 0.62 0.09 0.77 0.
15. TS-E Tripod Adapter (sold separately) With some camera models, the tilt, shift and rotation functions cannot be used when the camera is mounted directly on a tripod. When this happens, fit the optional TS-E tripod adapter into the tripod mount socket on the camera before mounting the camera on the tripod. Illustration shows TS-E50mm f/2.8L MACRO.
Specifications Focal Length/Aperture Lens Construction Minimum Aperture Horizontal Angle of View Vertical (Normal) Diagonal Min. Focusing Distance (working distance) Max. Magnification Field of View Tilt amount Shift amount Tilt scale display Shift scale display Rotation mechanism TS Rotation mechanism Filter Diameter Max. Diameter × Length Weight Hood Lens Cap Case TS-E50mm f/2.8L MACRO TS-E90mm f/2.8L MACRO TS-E135mm f/4L MACRO 50mm f/2.8 90mm f/2.
Specifications OO The lens length is measured from the mount surface to the front end of the lens. Add 24.2 mm when including the lens cap and dust cap. OO The size and weight listed are for the lens only, except as indicated. OO Extenders cannot be used with this lens. OO Macro Ring Lite MR-14EX II and Macro Twin Lite MT-24EX cannot be used with this lens. OO Aperture settings are specified on the camera. OO All data listed is measured according to Canon standards.
CT1-D009-A 1707SZ © CANON INC.