Owner's Manual

FEL:
FE
Lock*
The FE
(Flash Exposure)
lock locks
the correct
flash
exposure setting
for any part
of
the subject.
With
<ETTL>
displayed
on the LCD
panel,
press the camera's <M-Fn>
button. For cameras without a <M-Fn> button, press
the<*>
(AE lock)
or
<FEL> button .
..
-------•1
Focus
on
the
subject.
[ J
m
l
Press
the
<
M-Fn
>
button.
•
With the subject at the center
of
the
viewfinder, press the camera's
<
M-Fn
> button.
,._
The MT-26EX-RT will
fire a
preflash,
and the required
flash
output for the
subject is retained
in
memory .
... "FEL" will
be displayed
in
the
viewfinder for approx. 0.5
sec.
•
Each time you press the <
M-Fn
>
button, a preflash
will
be fired and the
new
flash
output required at that time
is
retained
in
memory.
0 •
If
a correct exposure cannot be obtained when
FE
lock is performed,
<~>blinks
in
the viewfinder. Move
closer
to the subject
or
open the
aperture, and perform
FE
lock again. You can
also
set a higher
ISO
speed and perform
FE
Jock
again when using a digital camera.
•
If
the target subject is too
small
in the viewfinder, FE lock may not be
effective.
"
-
~
•
When
you press
the<*>
button
of
an
EOS M series camera, a
circle
indicating the
flash metering range win be displayed at the center
of
the
screen.(<~*>
wiH
also
be
displayed depending on the camera model.)
23
I