User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Loading Envelopes
23FJ-022
Mak
e sure to atten any curls on envelopes before loading them. Also pay attention to the orientation of envelopes
and which side is face up.
Before Loading Envelopes(P. 102)
Loading Envelopes in the Drawer(P. 103)
Loading Envelopes in the Multi-Purpose Tray(P. 103)
● This section describes ho
w to load envelopes in the orientation you want, as well as procedures that you
need to complete before loading envelopes. For a description of the general procedure for loading
envelopes in the drawer, see
Loading Paper in the Drawer(P. 97) or Loading Paper in the Multi-
Purpose T
ray(P. 100) .
Before Loading Envelopes
Follo
w the procedure below to prepare the envelopes before loading.
1
Close the ap of each envelope.
2
Flatten them to release any remaining air, and make sure that the edges are pressed
tightly
.
3
Loosen any stiff corners of the envelopes and atten any curls.
Basic Operations
102