User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Loading Preprinted Paper
23FJ-023
When you use paper that has been pr
eprinted with a logo, pay attention to the orientation of the paper when loading.
Load the paper properly so that printing is performed on the correct side of the paper with a logo.
Making Printouts on Paper with Logos(P. 104)
Making 2-Sided Printouts on Paper with Logos(P. 104)
● This section mainly describes ho
w to load preprinted paper with the proper facing and orientation. For a
description of the general procedure for loading paper in the drawer, see
Loading Paper in the
Dr
awer(P. 97) or
Loading Paper in the Multi-Purpose Tray(P. 100) .
Making Printouts on Paper with Logos
Load the paper with the logo side (the side to print the document) face up.
Printing on Paper with Logos in Portr
ait Orientation
Printing on Paper with Logos in Landscape Orientation
Making 2-Sided Printouts on Paper with Logos
Load the paper with the fr
ont logo side (the side to print the rst page of the document) face down.
Basic Operations
104