User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
<None>
<WEP>
<Open System>
WEP Key 1 to 4
<Shar
ed Key>
WEP Key 1 to 4
<WPA/WPA2-PSK>
<Auto>
<AES-CCMP>
<WPS Push Button Mode>
Select to automatically congur
e a wireless connection by using the button on a WPS wireless router.
Setting
Up Connection Using WPS Push Button Mode(P
. 28)
<WPS PIN Code Mode>
Select to congur
e a wireless connection by entering a PIN code for a WPS wireless router.
Setting Up
Connection Using WPS PIN Code Mode
(P. 30)
<Power Save Mode>
Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.
<Off>
<On>
<Menu> <Network Settings> <Wireless LAN Settings> Read the displayed message
<OK> <Power Save Mode> Select <Off> or <On>
<Wir
eless LAN Information>
Select to view the current wireless LAN settings. Viewing Network Settings(P. 45)
<MAC Address>
<Wir
eless LAN Status>
<Latest Error Information>
<Channel>
<SSID Settings>
<Security Settings>
<Power Save Mode>
<Direct Connection Settings>
Set whether to connect dir
ectly. By enabling this function, connecting directly with the machine is possible even in an
environment without an access point or wireless LAN router.
Connecting Directly (Access Point Mode)(P. 127)
<Use Direct Connection>
<Off>
<On>
Setting Menu List
197