User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
<Time Until Direct Connection Termination>
Specify the time to automatically disconnect after Direct Connection is established.
0 (Do not terminate session automatically)
1 to 10 to 60 (min.)
<Menu> <Network Settings> <Direct Connection Settings> <Time Until Direct Connection
T
ermination>
Enter the time
<Access Point Mode Settings>
Congure the SSID/network k
ey arbitrarily. If you want to connect multiple mobile devices to the machine at the
same time, you need to congure both SSID and network key arbitrarily.
<Use Custom SSID>
<Off>
<On>
<SSID>
<Use Custom Network Ke
y>
<Off>
<On>
<Network Key>
<Menu> <Network Settings> <Direct Connection Settings> <Access Point Mode
Settings> <Use Custom SSID>/<Use Custom Network Key> <On> Enter the SSID/network
k
ey
<Apply>
<IP Addr
ess Settings for Direct Conn.>
Specify an IP address for using Direct Connection.
<Menu> <Network Settings> <Direct Connection Settings> <IP Address Settings for Direct
Conn.> Enter the IP address <Apply>
<Easy Connection via PC>
Start Easy Connection via PC (cableless setup mode). This allo
ws you to use Canon Laser NW Device Setup Utility on
your PC to congure network settings.
Setting Menu List
198