User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
<Use WSD Print>
<Off>
<On>
<Use WSD Browsing>
<Off>
<On>
<Use Multicast Discovery>
<Off>
<On>
<Use HTTP>
Enable or disable HTTP, which is required for communications with a computer, such as when using the Remote
UI, WSD printing, or printing with Google Cloud Print. Disabling HTTP Communication(P. 175)
<Off>
<On>
<Port Number Settings>
Change port numbers for protocols according to the network environment. Changing Port Numbers(P. 156)
<LPD>
1 to 515 to 65535
<RA
W>
1 to 9100
to 65535
<WSD Multicast Disco
very>
1 to 3702
to 65535
<HT
TP>
1 to 80
to 65535
<SNMP>
1 to 161 to 65535
<MTU Size>
Select the maximum size of packets the machine receives. Changing the Maximum Transmission
Unit(P. 60)
<1300>
<1400>
<1500>
<SNMP Settings>
Specify the settings for monitoring and contr
olling the machine from a computer running SNMP-compatible software.
Monitoring and Controlling the Machine with SNMP(P. 66)
Setting Menu List
202