User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
<Waiting Time for Connection at Startup>
Specify a wait time for connecting to a network. Select the setting depending on the network environment. Setting a
W
ait Time for Connecting to a Network(P. 61)
0
to 300 (sec.)
<Ethernet Driver Settings>
Select the communication mode of Ethernet (half-duple
x/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX).
You can also view the MAC address of the machine.
<Auto Detect>
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Conī “guring Ethernet Settings(P
. 58)
<Off>
<Communication Mode>
<Half Duplex>
<Full Duplex>
<Ethernet Type>
<10BASE-T>
<100BASE-TX>
<On>
<MAC Address>
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
the MA
C Address for Wired LAN(P. 45)
<IEEE 802.1X Settings>
Enable or disable IEEE 802.1X authentication.
Conī “guring IEEE 802.1X Authentication Settings
(P. 169)
<Off>
<On>
<Initialize Network Settings>
Select to r
eturn the Network Settings to the factory defaults.
<Initialize Menu>(P. 234)
Setting Menu List
204