User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
<Adjustment/Maintenance>
23FJ-043
All the settings r
elated to adjustment and maintenance are listed with descriptions. Default settings are marked with a
dagger (
).
<Displ. Timing for Cartridge Prep. Notif.>(P. 225)
<Special Processing>(P. 225)
<Clean Fixing Assembly>(P. 228)
<Displ. Timing for Cartridge Prep. Notif.>
Set the display timing for the message notifying you that the amount r
emaining in the toner cartridge or the drum
cartridge is low.
<Toner Cartridge>
<Drum Cartridge>
<Menu> <Adjustment/Maintenance> <Displ. Timing for Cartridge Prep. Notif.> Select <Toner
Cartridge> or <Drum Cartridge> Enter the cartridge level
<Special Processing>
If the print r
esults on special types of paper are not satisfactory, the following settings may improve the quality of the
printouts.
<Special Printing Mode U>
Sometimes toner appears splattered around text or patterns in a printout. In such cases, setting this to <On>
may impr
ove the quality of the printout.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Special Processing> <Special Printing Mode U>
<On>
● Setting this to <On> may affect the print quality for some types of paper (especially for lightweight
paper) or in some printing envir
onments (especially in high humidity environments).
● When you set this to <On>, <Special Printing Mode Q>, <Special Printing Mode R>, and <Special
Printing Mode T> are set to <Off> automatically.
Setting Menu List
225