User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Countermeasures for Each Error Code
23FJ-052
If an err
or occurs such as when printing is not successful, the corresponding error code is displayed in the job log
screen as a three-digit number. Check the following to nd out causes and solutions for each error code. For details of
the job log screen, see
<Status Monitor> Screen(P. 89) .
#852
The machine turns OFF for some reason.
● Check whether the po
wer plug is inserted into an outlet rmly.
#853
A document could not be printed because its data size exceeded the machine's upper processing
capability
.
● The machine may not be able to print documents with many pages. Reduce the number of pages per
printing, or print when no print job is queued or no document is being printed. If you are still unable to
print, check the document data for any defects.
Printing was canceled from the computer.
● If you cancel an operation when the print data is being sent to the machine from a computer, this error
code is displayed, but this is not abnormal. Print again as necessary.
Troubleshooting
296