Owner's Manual
Table Of Contents
- Instructions
- Features
- Parts & Controls
- Mounting & Detaching the Lens
- Setting the Focus Mode
- Switching the Focusing Range
- Full-Time Manual Focusing
- Adjusting the Zooming Touch
- Image Stabilizer
- Tips on Using the Image Stabilizer
- Infinity Distance Mark
- Infrared Index
- Using the Tripod Mount
- Hood
- Filters (Not Supplied)
- Extenders (Not Supplied)
- Specs
- Warranty
Tips
on
Using the Image Stabilizer
..
The image stabilizer does not compensate for
subject
movement
(where
the
subject itself
moves).
The image stabilizer should
be
0 (OFF)
in
the
following situations. If the switch
is
I (ON), the
image stabilizer may not operate correctly.
• Shots using a tripod
• Bulb (time exposure) shots
The image stabilizer may not
be
fully effective
in
the following situations:
• Panning with large camera
movements
in
MODE
1.
• Taking pictures from a moving object such as a
vehicle
in
MODE
1.
• Taking pictures other than panning shots
in
MODE
2.
When this lens
is
used with
an
extender, the
image stabilizer operates normally with models
sold since the fall of 1993 (EOS REBEL
XS/SOO,
EOS-1 N/DP/HS/RS, EOS ELAN
IIE/SOE,
EOS REBEL
G/SOO
N,
EOS
SOOO/888,
EOS
IX,
EOS
IX
Lite/IX 7 etc.), but does not operate with
the following EOS-series cameras sold before
that date:
• EOS6S0, EOS620, EOS 630/600, EOS
RT,
EOS 700, EOS7S0, EOS8S0, EOS-1,
EOS A2/A2E/S, EOS10S/10, EOS ELAN/100,
EOS REBEL S/REBEU1 000F/1 000,
EOS REBEL SII/REBEL 11/1000FN/1000N
..
The image stabilizer operates for about two
seconds
even when your finger
is
off the shutter
button. Do not remove the lens while the
stabilizer
is
in
operation. This will cause a
malfunction.
With
the
EOS-1V/HS,
EOS-3,
EOS
ELAN
7E/7/EOS
30/33, EOS ELAN7NElELAN7N/EOS30V/33V,
EOS ELAN
IIE/SOE,
EOS REBEL 2000/300,
EOS
IX,
and EOS D30, the image stabilizer will
not work during self-timer operation.
The image stabilizer does not operate with the
manual-focus EF-M camera.
[illf
you set the camera's Custom Function to change
the assigned button to operate the
AF,
the image
stabilizer will operate when you press the newly
assigned AF button.
ENG-9
Tips
on
Using the Image Stabilizer
..
The image stabilizer does not compensate for
subject
movement
(where
the
subject itself
moves).
The image stabilizer should
be
0 (OFF)
in
the
following situations. If the switch
is
I (ON), the
image stabilizer may not operate correctly.
• Shots using a tripod
• Bulb (time exposure) shots
The image stabilizer may not
be
fully effective
in
the following situations:
• Panning with large camera
movements
in
MODE
1.
• Taking pictures from a moving object such as a
vehicle
in
MODE
1.
• Taking pictures other than panning shots
in
MODE
2.
When this lens
is
used with
an
extender, the
image stabilizer operates normally with models
sold since the fall of 1993 (EOS REBEL
XS/SOO,
EOS-1 N/DP/HS/RS, EOS ELAN
IIE/SOE,
EOS REBEL
G/SOO
N,
EOS
SOOO/888,
EOS
IX,
EOS
IX
Lite/IX 7 etc.), but does not operate with
the following EOS-series cameras sold before
that date:
• EOS6S0, EOS620, EOS 630/600, EOS
RT,
EOS 700, EOS7S0, EOS8S0, EOS-1,
EOS A2/A2E/S, EOS10S/10, EOS ELAN/100,
EOS REBEL S/REBEU1 000F/1 000,
EOS REBEL SII/REBEL 11/1000FN/1000N
..
The image stabilizer operates for about two
seconds
even when your finger
is
off the shutter
button. Do not remove the lens while the
stabilizer
is
in
operation. This will cause a
malfunction.
With
the
EOS-1V/HS,
EOS-3,
EOS
ELAN
7E/7/EOS
30/33, EOS ELAN7NElELAN7N/EOS30V/33V,
EOS ELAN
IIE/SOE,
EOS REBEL 2000/300,
EOS
IX,
and EOS D30, the image stabilizer will
not work during self-timer operation.
The image stabilizer does not operate with the
manual-focus EF-M camera.
[illf
you set the camera's Custom Function to change
the assigned button to operate the
AF,
the image
stabilizer will operate when you press the newly
assigned AF button.
ENG-9