Help Guide

26
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Establishing a Connection via an Access Point
Connect the devices near the access point, because you will need to
press the WPS button.
1
Choose [WPS (PBC mode)].
● Press the button and choose
[ ] → [ 1] → [Wireless communication
settings] → [Wi-Fi function] → [ ] →
[Register a device for connection] →
[Switch network] → [Connect with WPS]
→ [WPS (PBC mode)] → [OK] → [OK].
2
Press the WPS button on the access
point.
3
Choose [Auto setting] on the
camera’s [IP address set.] screen.
● Connection is now attempted between
the camera and access point.
4
After a connection is established,
go to step 7 in “Connecting via Wi-
Fi” (
=
25).
6
Use the printer to connect to the
camera via Wi-Fi.
● In the printer’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
● In the password eld on the printer, enter
the password displayed on the camera.
7
Choose the printer to connect to via
Wi-Fi.
● Choose the printer to use and press the
button.
● Images on the memory card are
displayed after the devices are connected
via Wi-Fi.
8
Choose an image to print.
● Choose an image and press the
button.
● Select or specify the items displayed, and
then print (
=
44).