Help Guide

73
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Editing Still Images
● Image editing is only available when the memory card has sufcient
free space.
Rotating Images
● You can also rotate images by choosing [ 1] tab → [Rotate image].
Deactivating Auto Rotation
● The following rotation options are available for images in vertical
orientation.
On
Automatically rotate images during playback on both
the camera and computers.
On
Automatically rotate images during playback on
computers.
Off Do not automatically rotate images.
Resizing Images
● Editing is not possible for images shot at a pixel count of [ ].
● RAW images cannot be edited.
● Images cannot be resized to a higher pixel count.
● You can also congure this setting by choosing [
2] tab → [Resize].
Cropping
● RAW images cannot be edited.
● Cropped images cannot be cropped again.
● Cropped images cannot be resized or have creative lters applied.
● Cropped images will have a lower pixel count than uncropped images.
● While previewing the cropped image, you can resize, move, and adjust
the aspect ratio of the cropping frame.
● You can also specify the cropping frame size, position, orientation, and
aspect ratio by choosing [ 2] tab → [Cropping], choosing an image,
and pressing the button.
● You can also move the cropping frame by dragging it.
Applying Filter Effects
● For [ ], you can also choose the type of lter effect.
● For [
], you can also move the frame by touching or dragging across
the screen.
Correcting Red-Eye
● Once red-eye is corrected, frames are displayed around corrected
image areas.
● Some images may not be corrected accurately.
Applying Your Favorite Effects (Creative Assist)
● [AUTO1], [AUTO2], or [AUTO3] is displayed as a recommended preset
after the camera automatically analyzes the image.
● You can also specify your preferred effects, such as [Brightness],
[Contrast], [Saturation], [Color tone 1], [Color tone 2], and
[Monochrome].
Processing RAW Images with the Camera
● Images produced by in-camera processing will not match those
processed with Digital Photo Professional exactly.
● On the processing conditions screen, you can also choose an effect
for the selected processing condition by turning the
dial.
● For magnied display on the processing conditions screen, press the
button.
● The camera can also be set up for RAW image processing from the
Quick Control screen by choosing [
2] tab → [Quick Control RAW
processing] → [RAW image processing].