Help Guide

23
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Sending Images to Computers Automatically
Images on the camera can be sent to a computer automatically.
● Connect the computer running the dedicated Image Transfer Utility 2
program to the access point that the camera will connect to via Wi-Fi.
● Connect the devices near the access point, because you will need to
press the WPS button.
Connecting via Wi-Fi
Steps on the Computer (1)
1
Start Image Transfer Utility 2.
2
In Image Transfer Utility 2, access
the pairing settings screen.
● The screen to set up pairing is shown
when you follow the instructions
displayed the rst time Image Transfer
Utility 2 starts up.
Steps on the Camera (1)
3
Prepare to use wireless features.
● See “Preparing to Use Wireless
Features” (
=
8) (or when nished, go
to the next step).
4
Choose [Auto send images to
computer].
● Press the button and choose
[ ] → [ 1] → [Wireless communication
settings] → [Wi-Fi settings] → [Auto send
images to computer].
Establishing a Connection via an Access Point
Connect the devices near the access point, because you will need to
press the WPS button.
1
Choose [WPS (PBC mode)].
● Press the button and choose
[ ] → [ 1] → [Wireless communication
settings] → [Wi-Fi function] → [ ] →
[Register a device for connection] →
[Switch network] → [Connect with WPS]
→ [WPS (PBC mode)] → [OK] → [OK].
2
Press the WPS button on the access
point.
3
Choose [Auto setting] on the
camera’s [IP address set.] screen.
● Connection is now attempted between
the camera and access point.
4
After a connection is established,
go to “Steps on the Camera (2)”
(
=
22).
Controlling the Camera from EOS Utility
For details on using EOS Utility, refer to the EOS Utility instruction
manual. Remote shooting is only one of the many camera operations
available.