Help Guide

24
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Sending Images on the Camera to Computers
Automatically
1
Prepare to use wireless features.
● See “Preparing to Use Wireless
Features” (
=
8) (or when nished, go
to the next step).
2
On the camera, choose [Image
sending options].
● Press the button and choose
[ ] → [ 1] → [Wireless communication
settings] → [Wi-Fi settings] → [Auto send
images to computer] → [Image sending
options].
● Select or specify the items displayed.
3
Send the images to the computer
automatically.
● Make sure you are logged in to the
computer connected to the access point.
● Turn on the camera, within range of the
access point.
● Images are automatically sent to the
computer, following the sending options
you set in step 2.
● When using auto image transfer, ensure that the battery pack has
sufcient charge. Auto power off is disabled during auto image
transfer.
● Any images captured after auto image transfer are not sent to the
computer then. They are sent automatically when the camera is
restarted.
5
Connect to the computer via Wi-Fi.
● Choose [Auto send] → [Enable].
● Choose [OK] and press the
button.
● Choose [Connect with WPS] → [WPS
(PBC mode)] → [OK] → [OK].
Steps on the Access Point
6
Press the WPS button.
● Press the WPS button on the access
point to allow the camera to connect.
Steps on the Camera (2)
7
Choose a computer.
● Names of computers you can connect to
are displayed.
● Choose a computer to connect to.
Steps on the Computer (2)
8
Choose the camera to pair with.
● Camera nicknames are shown on the
pairing screen in Image Transfer Utility 2.
● Choose the camera to connect to and
click [Pairing] to connect the computer
and camera.