Help Guide

40
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
1
Attach the ash.
2
Set the shooting mode to , ,
, or mode.
● In other modes, ash settings cannot be
changed, because the ash is adjusted
and red automatically, as needed.
3
Congure the external ash.
● Keep cords (from the macro ring lite or macro twin lite, as well as
the off-camera shoe cord) away from ash heads.
● When using a tripod, adjust the position of the legs to prevent the
ash heads from coming into contact with the legs.
● Settings for the built-in ash cannot be congured while a
Speedlite EX series ash is attached, because that setting screen
is no longer accessible.
● The AF-assist beam on the external ash will not re.
Using the Hot Shoe
Use the hot shoe to attach an optional external ash or microphone.
1
Remove the hot shoe cap.
● Pull off the cap as shown.
● To avoid losing the cap, place it in
the case for your external ash or
microphone.
2
Attach the hot shoe cap.
● After removing the external ash or
microphone, reattach the cap to protect
the hot shoe.
● Insert the cap as shown.
Using an External Flash (Sold Separately)
More sophisticated ash photography is possible with an optional
Speedlite EX series ash.
● Non-EX series Canon ash units may not re correctly or may not
re at all, in some cases.
● Use of non-Canon ash units (especially high-voltage ash units)
or ash accessories may prevent normal camera operation and
may damage the camera.
● Also refer to the Speedlite EX series manual for additional
information. This camera is a Type-A camera that supports all
features of EX-series Speedlites.