Help Guide

41
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Setting External Flash Custom Functions
For details on Custom Functions for ash units, refer to the instruction
manual of the ash (sold separately).
● Choose [
1] → [Flash control] →
[External ash C.Fn setting] and press
the button.
● Choose an item, press the
button,
choose an option, and press the
button again.
● For full ash ring when shooting with EX series Speedlites, set
[Flash metering mode] to [1:TTL] (automatic ash metering).
Restoring External Flash Defaults
Restore default [External ash func. setting] and [External ash C.Fn
setting] settings.
● Choose [
1] → [Flash control] → [Clear
settings], and then press the button.
● Choose an item, press the
button,
choose [OK], and press the button
again.
Setting External Flash Functions
When an external ash is attached, congure the following settings in
[Flash control] on the [ 1] tab.
● Flash ring
● E-TTL II metering
● Slow synchro
● Safety FE
● External ash function settings (
=
41)
● External ash Custom Function settings (
=
41)
● Clear settings (
=
41)
● Choose [
1] → [Flash control] →
[External ash func. setting] and press
the button.
● The screen at left is displayed.
● Choose an item, press the
button,
choose an option, and press the
button again.
● [Built-in ash settings] is not available when an external ash is
attached.
● Information displayed and available setting items vary depending
on the type of ash unit, current ash mode, ash Custom
Function settings, and other factors. For details on the functions
available with your ash unit, refer to the instruction manual of the
ash unit.
● With an EX-series Speedlite not compatible with ash function
settings, only [Flash exposure compensation] can be adjusted.
([Shutter synchronization] can also be set for some EX-series
Speedlites.)