Help Guide
72
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
● If you edit images and save them as new images, a message is
displayed, and the images that were found are no longer shown.
● The same operations are available by choosing [
3] tab → [Set
image search conditions].
Finding Images with the Main Dial
● Turning the dial in single-image display jumps through images
forward or backward according to your specied method.
● After you choose [
] or [ ], turn the dial to view only images
matching the condition or jump by the specied number of images
forward or back.
● With [
], jumping is not possible unless there are applicable images.
Protecting Images
● Protected images on a memory card will be erased if you format the
card.
● Protected images cannot be erased using the camera’s erasure
function. To erase them this way, rst cancel protection.
● You can also protect images by choosing [
1] tab → [Protect
images].
Protecting Individual Images
● [ ] is displayed when you choose [ 1] tab → [Protect images] →
[Select images] and press the button. To cancel protection (and
remove [ ] display), when [ ] is displayed, press the button again.
Protecting Multiple Images
● You can also specify images by choosing [Protect images] and then
[Select range], [All images in folder], or [All images on card].
Rating Images
● Organize images by rating them on a scale of 1 – 5 ([ ], [ ], [ ],
[ ], [ ], or [ ]). By viewing only images with a specied rating, you
can restrict the following operations to all images with that rating.
- Viewing, viewing slideshows, protecting, erasing, or adding images
to a print list or photobook
● To remove ratings, press the
button, choose [ ] in the [ ] setting
item, and then press the button.
● You can also congure this setting by choosing [
3] tab → [Rating].
Erasing Images
● You can choose and erase unneeded images one by one. Be careful
when erasing images, because they cannot be recovered.
● Protected images cannot be erased.
● During display of images captured in both RAW and JPEG format,
pressing the
button displays [Erase ], [Erase JPEG], and
[Erase +JPEG]. Choose an option to erase the image.
● You can also erase images by choosing [
1] tab → [Erase images].
Erasing Multiple Images
● To clear selection (and remove [ ]), when [ ] is displayed, press the
button again.
● Choosing an image captured in both RAW and JPEG format will erase
both versions.